Development of a direct radioimmunoassay for serum progesterone

A direct radioimmunoassay for the measurement of progesterone in human serum is described. Progesterone 11-hemisuccinate was conjugated to tyrosine methyl ester (TME) by the mix anhydride method and then iodinated using chloramine-T. The radiochemical purity of different batches of¹²⁵I-progesterone was greater than 95% and showed 70–75% binding with excess antibody. Progesterone 11-hemisuccinate was coupled with BSA and injected to rabits. Antisera collected after three booster injections and having aK value of 1·10⁹1/M was selected for the assay. Significant reduction in binding with antibody was seen when hormone free serum was used in the assay system. Various blocking agents were tried to reduce the serum effects and none of them were found satisfactory. From a series of optimization experiments, an assay was developed without the use of blocking agents. This assay used a much higher concentration of antibody along with lower amount of serum sample (50 l). The optimized assay has a sensitivity of 0.5 nj/ml and a working range of 0.5 to 100 ng/ml. Serum samples were analyzed analysis showed good correlation between the results obtained from the present system and the DPC kit. (Y=0.93X+0.5,r=0.93, forn=25).     

Anisotropic electronic intracule densities for diatomics

The electronic intracule density, a three-dimensional contraction of the spinless electron pair density, is the probability density function for an interelectronic vector. A computationally efficient algorithm for the evaluation of the basic two-electron intracule integral for GTO s is presented. In order to provide an initial understanding of the topography of intracule distributions, anisotropic intracule densities for the X¹Σ ground states of the H₂ and N₂ molecules are reported and analyzed.     

Electro-kinetic transport of acetone,water and their binary mixtures

Summary Electroosmosis of acetone, water and their binary mixtures through thorium oxide (ThO₂) plug membrane has been studied and the data analysed using non-equilibrium thermodynamics. The phenomenological coefficients,L ₁₁ andL ₁₂ have been found to vary nonlinearly with composition. Excess phenomenological coefficients have therefore been evaluated and the results explained in terms of the membrane permeant and permeant-permeant interactions. The results on the measurement of electrophoretic velocity of ThO₂ particles dispersed in acetone-water mixtures also lead to the conclusion that the components of the mixture interact appreciably.

---

Zusammenfassung Die Elektroosmose von Aceton, Wasser and deren binären Gemische durch eine ThO₂-Pflock-Membran wurde untersucht; die Daten wurden mit Hilfe der Nichtgleich-gewichts-Thermodynamik analysiert. Die phänomenologischen KoeffizientenL ₁₁ undL ₁₂ ändern sich hiernach nichtlinear mit der Zusammensetzung. Es wurden daher Exzess-L ₁₁-und -L ₁₂-Werte berechnet; die Ergebnisse wurden auf Grund der Membran-Permeant- und Permeant-Permeant-Wechselwirkungen diskutiert. Aus der Messung der elektrophoretischen Geschwindigkeit von ThO₂-Teilchen, die in Aceton-Wasser-Gemischen dispergiert sind, folgt, daß eine merkliche Wechselwirkung zwischen den Komponenten der Mischung vorliegt.

---

---

With 8 figures and 1 table     

Osmotic and activity coefficients at 25°C for tetraalkylammonium bromides in deuterium oxide

Earlier work by Lindenbaum and Boyd has demonstrated the important role of hydrophobic interactions involving the water solvent in determining the osmotic coefficients and properties of aqueous solutions of the tetraalkylammonium halides. Osmotic coefficients of solutions of tetramethyl-, tetraethyl-, tetrapropyl-, and tetrabutylammonium bromides in the more highly structured solvent D₂O have now been determined by the gravimetric isopiestic method, using reference solutions of NaCl in D₂O. The data were fitted to the Rush-Johnson and Pitzer equations. Satisfactory agreement with the results for aqueous solutions at comparable concentrations indicates that the solution chemistry of these quaternary ammonium bromides is not highly dependent on the degree of structure of the pure solvents. Supplementary data for mixtures of Me₄NBr with Et₄NBr, Pr₄NBr, or Bu₄NBr in both H₂O and D₂O are consistent with this conclusion.On leave 1980–82 from Banaras Hindu University, India     

A study of equilibrium between cadmium cyanide and alkali halides and thiocyanate by solubility measurements

Summary A study of the Cd(CN)₂ +x X^– [Cd(CN)₂X _x ] ^x– equilibrium (where X = Cl, Br or CNS) has been carried out at 18° and 38° by measuring the solubility of cadmium cyanide in potassium chloride, bromide and thiocyanate at various concentrations, and at a high ionic strength (6 M) maintained with sodium perchlorate to minimise the effect of activity coefficients. Equilibrium constants forx = 1 and 2 have been calculated and clearly favour the situation wherex = 1. H values for the dissociation of [Cd(CN)₂X]^– have also been calculated.     

Recent applications of sample preparation techniques in food analysis

Even with the emergence of advanced techniques of separation and identification, it is rarely possible to analyse food without manipulation. The traditional techniques for sample preparation are time consuming and require large amount of reagents, which are expensive, generate considerable waste, contaminate the sample and can enrich it for analytes. The more analytical techniques have become highly developed, the more has sample clean-up become important in order to fully take advantage of them. Due to the multiplicity of food matrices, it is not possible to use one sample preparation technique, so many methods have been proposed for meeting all the requirements. The newest variations of wet digestion, solvent and sorbent extraction and membrane separation are summarised and their most recent applications to food analysis are provided.     

Synthesis, structure and catalytic properties of [Cp*Cr(C6F5)(Bn)(THF)] toward ethylene in the presence of AlEt3

Treatment of [Cp*CrCl(C₆F₅)]₂ with BnMgCl (Bn = benzyl) in Et₂O/THF affords [Cp*Cr(C₆F₅)(Bn)(THF)] (1) which has been isolated in 72% yield. This compound whose magnetic moment is equal to of 4.037 μ_B has been characterized by NMR and single crystal X-ray analysis. Compound 1 alone does not polymerize ethylene when dissolved in toluene. However, addition of excess AlEt₃ to a solution of 1 in toluene leads to a catalytically active system which readily oligomerizes ethylene under standard conditions. Oligomerization experiments carried out with [1] = 10⁻³ M and [AlEt₃] = 9 × 10⁻² M for 15 min lead to the production of ethylene oligomers with an activity of 280 kg mol Cr⁻¹ h⁻¹. The experimental molecular weight distribution observed at intermediate times during the reaction is satisfactorily accounted for by the Poisson distribution formula, which is indicative of a living polymerization system. These observations are in agreement with a catalytic cycle in which the growing alkyl chain is transferred from chromium to aluminum via a bimetallic complex in which the chromium and aluminum centers are bridged by an alkyl group and the growing polymer chain.     

Synthesis and anti-tumor activity of β-C-glycoside analogs of the immunostimulant KRN7000

A ring-closing metathesis approach was employed for the synthesis of a β-C-glycoside analog of the immunostimulant KRN7000. The protected C-glycosyl amino acid derivative 18 was converted to amino-olefin 20, and osmylation served to install the diol unit as a mixture of separable syn and anti isomers. Deprotection to the hydroxy-amine 21 was followed by N-acylation and debenzylation to deliver the target compound 5.     

Kinetics of decomposition of hydrogen peroxide on Fe(III)?Al(III) hydroxide-oxide systems

The kinetics of decomposition of hydrogen peroxide have been studied on mixed Fe(III)–Al(III) hydroxide and oxide catalysts. While iron hydroxide possesses considerable catalytic activity, aluminium hydroxide has very little activity. The rate of decomposition on mixed hydroxides increases with increasing concentration of aluminium hydroxide up to about 1.5 mol% and decreases thereafter. The mixed oxides possess negligible activity compared to the corresponding hydroxides. The energy of activation, as calculated from the Arrhenius equation, is 10.1 kcal/mol for sample S4, containing 1.52 mol% of alumina. The rate of decomposition of S4 increases with increasing pH up to 6.8 and decreases thereafter. The rate is first order in all these cases. A suitable mechanism is suggested.

---

Fe(III)–Al(III). , . , 1,5 , . . , , 10,1 / S4, 1,52 . S4 pH 6,8, . . .

     

A novel nitrate-selective electrode based on precipitated nitron nitrate

Summary A nitrate-selective electrode based on precipitated nitron nitrate in an epoxy resin matrix has been prepared. The lower detection limit is 10^–5 M, the optimum pH range is 2.0–8.5, and the response time is 1 min. The electrode is selective in presence of CH₃COO^–, SO₄ ^2–, C₂O₄ ^2–, PO₄ ^3–, NO₂ ^–, Cl^– and Br^–, but I^– interferes. Results for nitrate in soil samples were in agreement with values obtained spectrophotometrically.

---

Eine neue nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats

Zusammenfassung Eine nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats in einer Epoxyharz-Matrix wurde hergestellt. Die untere Nachweisgrenze ist 10^–5 M, das pH-Optimum liegt zwischen 2,0 und 8,5, die Reaktionszeit beträgt 1 Minute. Die Elektrode ist selektiv in Gegenwart von Acetat, Sulfat, Oxalat, Phosphat, Nitrit, Chlorid und Bromid; aber Jodid stört. Ergebnisse der Nitratbestimmung in Bodenproben stimmen mit spektrophotometrischen Resultaten überein.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.