Electrochemical properties of Ebonex®/Pt anodes

The electrochemical behavior of platinized Ebonex® was studied. The electrochemical and semiconductor properties of electrodes can be varied within wide limits by thermal treatment of Ebonex®/Pt, which selectively affects the electrocatalytic activity of anodes in the oxygen evolution reaction. The reduction peak of platinum oxides on the cyclic voltammetry (CV) curves can be used as a correlation parameter when evaluating the electrocatalytic activity of Ebonex®/Pt electrodes in the oxygen evolution reaction.     

Synthesis and properties of macrocyclic diazene switch with binaphthalene unit attached via acrylamide linkers

2,2′-Diiodo-1,1′-binaphthalene undergoes a tandem Heck reaction with methyl acrylate to afford methyl 2-(7H-dibenzo[c,g]fluoren-7-ylidene)acetate. As a consequence, the target macrocyclic diazene with binaphthalene unit attached via acrylamide linker was prepared by the stepwise building of acrylamide at a binaphthalene moiety, including the Doebner modification of the Knoevenagel condensation, and completed by oxidative macrocyclisation of aniline end-groups. Despite being an equimolar mixture of monomer and dimer, it exhibited remarkable changes in CD spectra due to reversible (E/Z) isomerisation of N=N diazene bonds upon irradiation at 365/465 nm. Although the dimer isomerises from (E) to (Z) isomer 7.4 times faster than the monomer, the latter’s contribution to the change in ellipticity at 307 nm in the photostationary state is 2.4 times greater.     

Conformational flexibility of xanthene‐based covalently linked dimers

The conformational flexibility of three covalently linked dimers consisting of two xanthene‐based moieties connected by a diphenyl ether linker was studied using NMR spectroscopy, X‐ray crystallography, and density functional theory (DFT) calculations. The three dimers interconvert as a function of pH: the doubly cationic dimer (Xan⁺)₂ exists in acidic solutions (pH < 0.5), the mono‐alcohol monocation Xan⁺–Xan‐OH at intermediate pH values (pH = 1–3), and the neutral diol at the highest pH‐values (pH > 3). Each dimer exhibits conformational degrees of freedom associated with rotations of either the xanthene moiety or of the diphenyl ether (DPE) linker. The barriers for rotation of the xanthylium moiety were evaluated using DFT calculations, yielding values of 23 kcal/mol for (Xan⁺)₂ and 11 kcal/mol for (Xan‐OH)₂, respectively. The rotational barrier for the diphenyl ether linker in Xan⁺–Xan‐OH (15 kcal/mol) was experimentally determined using variable temperature NMR measurements. The relative orientation of the two –OH groups in (Xan‐OH)₂ diol was investigated in solution and the solid state using NMR spectroscopy and X‐ray crystallography. The conformer observed in the solid state was found to be the In–Out conformer, while free rotation of the xanthenol units is thought to occur on the NMR timescale at room temperature. These studies are relevant for the design of linkers for efficient water oxidation catalysts. Copyright © 2016 John Wiley & Sons, Ltd.     

Pourbaix diagrams in weakly coupled systems: a case study involving acridinol and phenanthridinol pseudobases

The thermodynamics of proton‐coupled electron transfer (PCET) in weakly coupled organic pseudobases was investigated using 2,7‐dimethyl‐9‐hydroxy‐9‐phenyl‐10‐tolyl‐9,10‐dihydroacridine (AcrOH) and 6‐phenylphenanthridinol (PheOH) as model compounds. Pourbaix diagrams for two model compounds were constructed using the oxidation potentials and the pK_a values obtained, respectively, from cyclic voltammetry and photometric titrations. Our comparative study reveals the importance of having the redox active –N center closer to –OH functionality on the thermodynamics of PCET process: PheOH exhibits a wider range of pH values (pH = 2.8 to 13.3) in which both the alcohol and the corresponding alkoxy radical are expected to coexist in solution. This result indicates that a concerted mechanism is more likely to be discovered in pseudobases analogous to PheOH. The thermochemical data also indicate that the concerted PCET mechanism cannot be achieved if water is used as the proton acceptor: assuming the pK_a of hydronium ions as ?1.7, the PCET involving PheOH or AcrOH as proton/electron donors and water as the proton acceptor is expected to follow the stepwise ET/PT mechanism. Copyright © 2015 John Wiley & Sons, Ltd.     

Zinc phthalocyanine-based water-soluble thiolated photosensitizer and its conjugates with gold nanoparticles: Synthesis and spectral properties

A new photosensitizer, monoconjugate of zinc octa-4,5-carboxy-phthalocyanine with L-cysteine, which is rather readily soluble in water, has been synthesized and characterized. The chemisorption of its molecules on the surface of gold nanoparticles with different sizes has been studied. A comparative analysis of the spectral characteristics of the synthesized conjugates of gold nanoparticles with the photosensitizer has shown that the photosensitizer grafted to gold nanoparticles exhibits rather intense fluorescence. Therefore, such conjugates can be used for photodynamic therapy of tumors.     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.     

Characteristics of the elastic strain of a Ge(111) surface under a mechanical load

Estimates are obtained for various components of the elastic strain in a Ge(111) surface layer under isotropic lateral tension. Agreement with the reversible components of surface thinning, derived from energy shifts in the volume and surface plasma peaks, suggests that the latter have an elastic character. It is conjectured that the anomalously high strain in a thin surface layer is due to the partially quasielastic variation of the relief of strained semiconductor surfaces. Fiz. Tverd. Tela (St. Petersburg) 41, 641–644 (April 1999)     

Study of micro‐channel geometries for internally cooled Si monochromators

Rocking curves of micro‐channel (MC) water‐cooled monochromators are broadened by stresses introduced during fabrication and under X‐ray thermal load. This is a problem which will be even more serious with the rise of the fourth‐generation synchrotron sources, i.e. the free‐electron lasers. The X‐ray optics group at the Institute of Physics at the ASCR v.v.i. in Prague is designing, testing and, with company Polovodi?e a.s., fabricating novel internally water‐cooled Si monochromators. Here three new micro‐channel geometries are introduced which reduce rocking‐curve enlargement owing to the fabrication to less than 2.5 µrad (～0.5 arcsec). All three MC designs show less rocking‐curve enlargement and smoother topographic images. The designs also show better cooling efficiencies than the classical MC design in finite‐element analysis calculations.     

Raman studies and optical properties of some (PbO)x(Bi2O3)0.2(B2O3)0.8−x glasses

Five (PbO)_x(Bi₂O₃)_0.2(B₂O₃)_0.8−x glasses, where x = 0, 0.2, 0.3, 0.4 and 0.6, were prepared. The dilatometric glass transition temperature (T_g) was found in the region 470 (x = 0)≥ T_g ( °C) ≥ 347 (x = 0.6), and the density (ρ) varied within 4.57 (x = 0) ≤ ρ (g/cm³) ≤ 8.31 (x = 0.6). Raman spectra indicated the conversion of BO₃ to BO₄ entities for low x values but for x > 0.3, namely, for x → 0.6, back‐conversion occurred, most probably. From the measurements of the optical transmission on very thin bulk samples, the room temperature optical gap values (E_g) were determined to be in the range 4.03 (x = 0)≥ E_g (eV) ≥ 3.08 (x = 0.6). The temperature (T) dependence of the optical gap (E_g(T)) in the region 300 ≤ T(K) ≤ 600 was examined and approximated by a linear relationship of the form of E_g(T) = E_g(0)− γT, where γ × 10⁻⁴(eV/K) varied from 5.1 to 6.8. The non‐linear refractive index (n₂) was estimated from the optical gap values and it was found to correspond to the n₂ values calculated from the experimental third‐order non‐linear optical susceptibility taken from the literature. Copyright © 2008 John Wiley & Sons, Ltd.     

Nitroxide‐Mediated Polymerization of Bio‐Based Farnesene with a Functionalized Methacrylate

Farnesene (Far) is a bio‐based terpene monomer that is similar in structure to commercially used dienes like butadiene and isoprene. Nitroxide‐mediated polymerization (NMP) is adept for the polymerization of dienes, but not particularly effective at controlling the polymerization of methacrylates using commercial nitroxides. In this study, Far is statistically copolymerized with a functional methacrylate, glycidyl methacrylate (GMA), by NMP using N‐succinimidyl modified commercial BlocBuilder (NHS‐BB) initiator. Reactivity ratios are determined to be r _Far = 0.54 ± 0.04 and r _GMA = 0.24 ± 0.02. The ability of the poly(Far‐stat‐GMA) chains to reinitiate for chain extension with styrene showed a clear shift in molecular weight and monomodal distribution. Copolymerizations using a new alkoxyamine, Dispolreg 007 (D7), is explored as it is shown to homopolymerize methacrylates, but not yet reported for statistical copolymerizations. Bimodal molecular weight distributions are observed when an equimolar ratio of Far and GMA is copolymerized with D7 due to slow decomposition of the initiator, but chain ends are active as shown by successful chain extension with styrene. Both NHS‐BB and D7 initiators are used to synthesize poly[Far‐b‐(GMA‐stat‐Far)] and poly(Far‐b‐GMA) diblock copolymers. While the NHS‐BB initiated polymer chains have lower dispersity, D7 exhibits more linear polymerization kinetics and maintains more active chain ends.