A simple synthesis of γ-aminoacids

The addition of dianions of carboxylic acids to bromoacetonitrile, leads, in good yields, to the corresponding γ-cyanoacids that give γ-aminoacids on hydrogenation. This two-step methodology improves the results previously described.     

Characterization of fatty acid methyl esters by thermal analysis

The thermal stability of selected straight-chain (C₆-C₁₄) esters of fatty acids has been studied by TG-DTG and DTA analysis. In DTG, a peak is detected between 84° and 125° C followed by a main effect in the range 105°–215°C, whereas in DTA only an exothermic peak appears in the range of 126.5° to 187°C (onset temperatures). The temperatures of these effects have been related with ignition points, molecular weights and boiling points. The characteristics of melting and recrystallization of the above fatty acid methyl esters and those with carbon numbers between C₁₄ and C₂₄ have been established by DSC along the melting range between ?83° and 50°C. Polymorphism appears in caproic, heptanoic, palmitic and stearic acid methyl esters.     

Effect of the synthesis conditions on the magnetic and electrical properties of the BaFeO3−x oxide: A metamagnetic behavior

The BaFeO_2.95 oxide has been obtained from thermal decomposition of the [BaFe(C₃H₂O₄)₂(H₂O)₄] metallo-organic precursor at 800 °C under atmospheric oxygen pressure as small and homogeneous particles. From electronic paramagnetic resonance data, a metallic behavior in the 230-130 K temperature range has been observed. Magnetic measurements confirm the existence of a ferro-antiferromagnetic transition at 178 K. The magnetic properties of the BaFeO_2.95 oxide are strongly dependent on both temperature and magnetic field with a metamagnetic behavior. The synthesis conditions play an important role on the morphology and the electrical and magnetic properties. The syntherization of the sample produces a dramatic change in the transport properties and the existence of conductivity disappears.     

Evolution of Organized Lariat Ether Alcohol and Diol Hydrate Macrostructures in the Solid State

Lariat ether alcohols and diols derived from dibenzo-14-crown-4crystallize in the anhydrous form or as hydrogen-bondedmonohydrates or networks depending upon thepolyether ring substitutents and the composition of the aqueous organic crystallization solvent. Supramolecular structures are created when the lariat ether alcohol sym-(hydroxy)dibenzo-14-crown-4 (1) with ``sticky ends' of ether oxygens and hydroxyl protons, hydrogen bond to each other via bridging water molecules to form three-dimensional networks. For crystallization of 1 from 30% aqueous acetonitrile, this self-association is sufficiently strong to spontaneously generate a supramolecular structure with water channels.     

Synthesis of new visible light active photocatalysts of Ba(In(1/3)Pb(1/3)M'(1/3))O3 (M' = Nb, Ta): a band gap engineering strategy based on electronegativity of a metal component

We have synthesized new, efficient, visible light active photocatalysts through the incorporation of highly electronegative non-transition metal Pb or Sn ions into the perovskite lattice of Ba(In(1/3)Pb(1/3)M'(1/3))O3 (M = Sn, Pb; M' = Nb, Ta). X-ray diffraction, X-ray absorption spectroscopic, and energy dispersive spectroscopic microprobe analyses reveal that tetravalent Pb or Sn ions exist in the B-site of the perovskite lattice, along with In and Nb/Ta ions. According to diffuse UV-vis spectroscopic analysis, the Pb-containing quaternary metal oxides Ba(In(1/3)Pb(1/3)M'(1/3))O3 possess a much narrower band gap (E(g) approximately 1.48-1.50 eV) when compared to the ternary oxides Ba(In(1/2)M'(1/2))O3 (E(g) approximately 2.97-3.30 eV) and the Sn-containing Ba(In(1/3)Sn(1/3)M'(1/3))O3 derivatives (E(g) approximately 2.85-3.00 eV). Such a variation of band gap energy upon the substitution is attributable to the broadening of the conduction band caused by the dissimilar electronegativities of the B-site cations. In contrast to the ternary or the Sn-substituted quaternary compounds showing photocatalytic activity under UV-vis irradiation, the Ba(In(1/3)Pb(1/3)M'(1/3))O3 compounds induce an efficient photodegradation of 4-chlorophenol under visible light irradiation (lambda > 420 nm). The present results highlight that the substitution of electronegative non-transition metal cations can provide a very powerful way of developing efficient visible light harvesting photocatalysts through tuning of the band structure of a semiconductive metal oxide.     

Evolution of the crystal and electronic structures of magnetic RuSr(2-x)La(x)GdCu2O8 superconductors upon La substitution

We have investigated systematically the effects of La substitution on the chemical bonding nature and physical properties of magnetic RuSr(2-x)La(x)GdCu2O8 superconductors. X-ray diffraction and energy dispersive spectroscopic microprobe analyses reveal that a fraction of Sr ions can be successfully replaced by La ions with the contraction of unit cell volume. According to electrical resistance and dc magnetization measurements, the La substitution gives rise to a significant reduction of superconducting transition temperature (T(c)) but to an increase of magnetic ordering temperature with depressed remanent magnetization. Ru K- and Cu K-edge X-ray absorption spectroscopic results clarify that average Ru and Cu oxidation states decrease upon the La substitution. On the basis of the spectroscopic evidences presented here, we are able to attribute the T(c) reduction upon the La substitution to the depletion of the hole density in CuO2 layers and the accompanying variation of magnetic coupling behavior to the change of Ru oxidation state.     

A new strategy for the synthesis of highly functionalised fluorinated compounds by reaction of lithium dianions of carboxylic acids with perfluoroketene dithioacetals

The reaction of perfluoroketene dithioacetal with lithium dienediolates of carboxylic acids proceeds at the ω position probably through an addition to the π system followed by elimination of the vinylic fluoride. The preparative value of this reaction depends strongly on the reaction and work-up conditions. The overall process lead to highly functionalised synthons containing a trifluoromethyl group.     

Surface properties of plasma-modified polypropylene and propylene-hexene-1 copolymer films

The surface properties of polypropylene and propylene and hexene-1 copolymers synthesized on the rac-Me₂SiInd₂ZrCl₂-polymethylalumoxane isocpecific metallocene system and the Ph₂C(Cp)(Flu)ZrCl₂-polymethylalumoxane syndiospecific system were studied. It was found that syndiotactic polypropylene films were less hydrophobic than isotactic polypropylene films, whereas the films of propylene and hexene-1 copolymers were less hydrophobic than the films of corresponding homopolymers. The hydrophobicity of samples decreased with the hexene-1 content of the copolymer. Treatment in a dc discharge resulted in noticeable surface hydrophilization in all of the test polymer samples. There is a correlation between the surface parameters and the density of surface charge induced in the polymers by dc discharge treatment.     

Determination of cadmium and lead in mussels by tungsten coil electrothermal atomic absorption spectrometry

In this work it was evaluated the determination of Cd and Pb in mussels by tungsten coil electrothermal atomic absorption spectrometry (TCA-AAS). A critical and comprehensive study of the effects caused by Pd, Mg, ascorbic acid, and binary mixtures of these compounds on the atomization of Cd and Pb in acid digested solutions of mussels was performed. Palladium and mixtures containing it were useful to increase sensitivity and thermal stability of Cd and Pb. Additionally, the coil lifetime was increased and the background signals were decreased in these modifiers. All these favorable effects were analytically exploited to determine Cd and Pb in samples of mussels. The proposed methodology was validated using two certified reference materials (oyster tissue and mussel). No statistical difference was observed between determined and certified values at a 95% confidence level. Cadmium and Pb in Chilean bivalve mussels were determined by TCA and by graphite furnace-AAS. Again, the results showed statistical agreement.