原位插层聚合制备聚丁二烯/蒙脱土纳米复合材料的结构与性能研究

聚合物 /粘土纳米复合材料由于具有常规复合材料所没有的结构、形态及更优异的力学、热学、阻燃、阻隔等性能 ,自 1 987由日本丰田公司首次报道了制备尼龙 6 粘土纳米复合材料以来 ,立刻引起人们的普遍关注[1～ 17] .目前报道的聚合物 /粘土纳米复合材料主要集中在以树脂为基体 ,例如 ,聚酰胺[1～ 4] 、聚苯乙烯[5～ 8] 、聚甲基丙烯酸甲酯[9,10 ] 、聚丙烯[11,12 ] 等 .制备以橡胶为基体的橡胶/粘土纳米复合材料研究较少 ,采用的方法多为通过橡胶大分子插层 ,如熔融插层法[1 3] 、溶液插层法[14 ] 、乳液法[15,16] 等 ,这些方法均存在插层…     

纳米氮化镁的合成

在制备高硬度、高热导、耐磨、耐腐蚀、耐高温的新兴陶瓷材料氧化硼、氮化硅的固相反应中，氮化镁是不可缺少的烧结助剂［‘，’j．同时，氮化镁还可用于制备发泡合金和回收核废料等领域．目前氮化镁的制备方法有：镁粉直接与氮气反应法［‘，‘1、镁在氮等离子流中与氮反应法＊‘、在氮气气氛下镁线圈爆炸法‘’‘和低压化学气相沉积法［’j．在上述方法中，有些方法需要复杂和昂贵的设备．有些方法得到氮化镁的产率较低．镁粉直接与氮气反应是具有工业生产价值的方法一然而，这种方法需要SOO”C到gOO”C的高温．我们曾经报道过利用温和…     

Construction and Analysis of N-phosphoryl Peptide Libraries

N-Phosphoryl peptide libraries were constructed by transformation from homo-oligopeptide libraries, which was synthesized by self-assembly of amino acids with the assistance of phosphorus oxychloride. Electrospray ionization mass spectrometry (ESI-MS) was used to monitor the reaction.     

一个锰(Ⅲ)Schiff碱配合物[Mn(napn)(CH_3OH)_2]ClO_4的合成与晶体结构

合成了一个新配合物[Mn(napn)(CH3OH)2]ClO4 (C26H26 Cl N2O8Mn,Mr = 584.88,H2napn = 双a-萘酚醛缩乙二胺),并测定了其晶体结构。晶体属于三斜晶系,空间群P ,a = 7.813(1),b = 13.025(2),c = 14.089(2) ? = 64.89(3), = 83.98(3), = 78.11(3)海琕 = 1270.16 ?,Z = 2, Dc = 1.529 g/cm3, F(000) = 604, R = 0.0837, wR = 0.1636。锰(Ⅲ)离子的配位构型为拉长的八面体。Schiff碱配体napn2-中的N2O2在赤道平面与锰(Ⅲ)形成四配位,2个CH3OH中的O原子分别在赤道平面两侧轴向位置与锰(Ⅲ)配位。由于Jahn-Teller效应,轴向上的MnO平均键长为2.52 拧A硗猓О写嬖诜肿幽诤头肿蛹淝饧?     

酵母核糖核酸在碳纳米管修饰电极上的电化学行为及其分析测定

研究了酵母核糖核酸（yRNA）在碳纳米管（MWNT）修饰电极上的电化学行为，优化了测定参数，在此基础上建立了一种直接测定yRNA的电分析测试方法。yRNA在碳纳米管修饰电极上于磷酸盐缓冲溶液中在0．758V处产生不可逆的氧化电流峰，峰电流与yRNA的质量浓度在1～10mg／mL之间有良好的线性关系，线性回归方程为：Iρ=0．0813ρ＋0．1807，相关系数r为0．9980，检出限为0．6mg／mL。     

阴离子导向组装：两个具有不同阳离子的多维Ag(I)配合物的晶体结构

Assembly of [Ag（CN）2]^- units with M（Ⅱ）-diamine complex cations [Cu（LN-N）2]^2＋, where LN-N represents L2-diaminopropane （pn） and ethylenediamine （en）, afforded two complexes, [Cu（pn）2][Ag2（CN）4] （1） and [Cu（en）2][Ag3（CN）5] （2）, which were characterized by elemental analysis, IR, UV-Vis and ESR spectra. Single crystal X-ray analyses show that these complexes have 2D and 3D architectures through silver-silver interactions and other weak interactions. The luminescence behaviors of the two complexes were also studied by means of emission spectra.     

费曼路径积分和霍金蒸发

在本文中,我们采用路径积分方法,证明了我们在不久前提出来的一个猜想,即与具体的时空度规形式无关,任一具有未来视界的静态和稳态时空,都存在霍金蒸发。 关键词：     

Synthesis and Properties of Polyetherketones Containing Sulfide and Phthalazinone

High molecular weight copoly(ether ketone)s (PEK) based on 4-(4-hydroxyphenyl)-1-phthalazinone (DHPZ)/4,4′-thiobisphenol (TBP)/4,4′-diflourodiphenylketone (DFK) were prepared by nucleophilic substitution polycondensation. The copolymers were characterized by FT- and ^1H-NMR. Thermal properties and solubility of copolymers were studied.     

Synthesis, crystal structure and magnetic properties of a novel manganese(II)-nitronyl nitroxide-azido(μ_(1,1) and μ_(1,3)) one-dimensional complex

A novel one-dimensional manganese(Ⅱ) complex containing nitronyl nitroxide radical [Mn2(IM2-py)2(Ac)2((μ1.1-N3)(μ1,3-N3) . EtOH]n was synthesized and characterized structurally and magnetically. It crystallizes in the monoclinic space group p21/n. Each Mn(Ⅱ) ion is six-coordinated in a distorted octahedral environment. The two N atoms of the nitronyl nitroxide radical and the two O atoms of acetate ligands are in the equatorial plane, whereas the two different azido bridging ligands are in trans axial position. Mn(Ⅱ) ions are linked by nitrogen atom of μ1,1-azido and oxygen atoms of two carboxy groups to form a Mn-Mn unit. Mn-Mn units are linked by azido ligands through u1,3 bridging style to form a one-dimensional chain. The compound is connected by the coordination bonds,π-π interactions and hydrogen bonds as a three-dimensional structure. Magnetic susceptibility data support that there are stronger antiferromagnetic interactions between the radical and Mn(Ⅱ) ion, weak antiferromagnetic inter     

A New Activation Method for Electroless Metal Plating：Palladium Laden via Bonding with Self—Assembly Monolayers

A new activation method has been developed for electroless copper plating on silicon wafer based on palladium chemisorption on SAMs of APTS without SnCl2 sensitization and roughening condition.A closely packed electroless copper film with strong adhesion is successfully formed by AFM observation.XPS study indicates that palladium chemisorption occurred via palladium chloride bonding to the pendant amino group of the SAMs.