EPR spectroscopy and polarography of nitroazoles. 3. Nitropyrazoles

The results of an EPR investigation are presented with polarographs of electrochemical excitation of nitropyrazoles in acetonitrile. It is shown that 3- and 4-nitropyrazoles are excited in two single-electron stages with formation of dianion radicals. Upon excitation, N-alkylnitropyrazoles form stable anion radicals. 1-Nitro- and 1,4-dinitropyrazoles are excited upon splitting off of the NO₂ anion. Excitation potentials of the nitropyrazoles and hyperfine interaction constants for the corresponding ion radicals are given.See [1] for Communication 2.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 523–527, April, 1982.     

Application of fused-silica capillary gas chromatography to the analysis of underivatized drugs

The feasibility of using fused-silica capillary chromatography for the routine analysis of several common drugs is illustrated. Considerations for optimizing on-column and splitless injection are discussed as part of a study of system discrimi nation and reproducibility. The peak shape of polar solutes is improved through the use of a binary solvent and non-extractable stationary phase columns. Cold on-column injection with cross-linked polysiloxane deactivated columns produced linear quantitation from 1 to 100 ng with precisions of 0.1–2% for selected anticonvulsant drugs.     

Spectrophotometric determination of palladium(II) with 2-diethylaminoethanethiol hydrochloride and the simultaneous determination of rhodium and palladium

2-Diethylaminoethanethiol hydrochloride is proposed for spectrophotometric determination of palladium(II). The sensitivity of the reaction is 0.0085 smg/cm² and the yellow colored complex shows absorption maxima at 258 mμ and 303 mμ. Color development is slow in the cold but complete after heating for 10–15 min. The optimum pH range is 3.5 to 5.5 and the system adheres to Beer's law between 0.2 and 16.8 p.p.m. of palladium. The average and maximum relative standard deviations were 0.60% and 1.40% respectively. Interferences due to other platinum metals were studied and a procedure is suggested for the simultaneous determination of rhodium and palladium.     

On inferences of bond character from bond length; the important role of nonbonded interactions

Although experimental molecular structure is one of the oldest and most frequently applied diagnostic tools in studies of the nature of chemical bonds, it is concluded that its application to all but the grossest details of bonds such as carbon-carbon bonds remains entirely speculative. The concept of bond length is discussed to emphasize the need for careful consideration of ambiguities associated with the natural indeterminacy of atomic positions. A theoretical basis is given to the empirical Schomaker-Stevenson rule relating bond length to electronegativity. The divergent views of Pauling and Walsh on hybridization, ionic character, and bond strength are reconciled to some extent with the aid of a simple model. It is shown that structural effects commonly attributed to conjugation, hyperconjugation, hybridization, and partial ionic character can be rationalized to a remarkable extent in terms of nonbonded interactions. It is suggested that these factors are not fundamentally as distinct from each other as they are often assumed to be, and that much more serious attention should be given to the role of nonbonded interactions.     

Plasma-Enhanced Chemical Vapor Deposition of Silicon Carbonitride Films from Volatile Silyl Derivatives of 1,1-Dimethylhydrazine

Silicon carbonitride films were synthesized from new volatile precursors by plasma-enhanced chemical vapor deposition. Based on a detailed study of the morphology of film surfaces, it was found that the layer material was an amorphous matrix with inclusions of nanosized crystals. Calculation of the structure of the crystalline phase from synchrotron X-ray diffraction patterns demonstrated that the entire set of the diffraction peaks detected is indexed by a tetragonal structure with the lattice parameters a = 9.6 Å and c = 6.4 Å. This is consistent with the fact that the carbon 1s and nitrogen 1s core level X-ray photoelectron spectra exhibited only sp ³ bonding, which was expected for superhard carbon nitride phases.     

Figures of merit of pneumatic and ultrasonic sample introduction systems in inductively coupled plasma–multichannel-based emission spectrometry in an ultra-clean environment

Conventional figures of merit such as limits of detection, signal to background ratio or repeatability, are used to determine the performance of pneumatic and ultrasonic sample introduction systems in an ultra-clean environment with an axially viewed inductively coupled plasma-atomic emission spectrometry and multichannel detection. We observed that the ultrasonic nebuliser offered a large improvement of signal intensity (10-133 greater) compared to a cyclone chamber coupled with a pneumatic Meinhard nebuliser. This improvement is associated with an average increase of signal to background ratio by a factor 86 and an average decrease of detection limits by a factor 6. The improvement factors generally depend on the element and for the same element on spectral lines. Typically, the observed values of detection limits in this work are lower than those published and obtained in non-ultra-clean conditions. The results emphasize that the environmental conditions of cleaning and analysis are essential to avoid and control cross contamination of the samples and hence to obtain low detection limits.     

Kinetics of Gold Electrodeposition from Cyanide Electrolytes at a Monitored Surface Coverage by Thallium Atoms

A procedure for measuring kinetic parameters of gold electrodeposition in the presence of catalytically active thallium(I) ions while monitoring the coverage of the gold surface by thallium adatoms, , is described. The procedure accounts for the duration of contact between a freshly renewed surface of gold and a thallium-containing solution and assumes that the incorporation rate of thallium adatoms is proportional to and the current density of gold electrodeposition. At = const, kinetic dependences correspond to the Tafel equation. Values of and i ₀ increase with . At = 0.3, 0.6 and i ₀ 3 × 10^–4 A cm^–2, which conforms to values calculated from anodic curves obtained in similar conditions.     

Migration of 99Tc in a Weak Loess Aquifer: A Field Column Experiment

The migration of ⁹⁹Tc in a weak loess aquifer was investigated in-situ with undisturbed aquifer medium columns. The columns were obtained horizontally at a depth of 3236 m in an Underground Research Facility (URF). Quartz containing ³H (HTO) and ⁹⁹Tc (in the form of ⁹⁹TcO₄ ^-) was introduced into one end of the columns and the columns were covered tightly. Aquifer water was introduced into the columns directly from an experimental shaft in the UFR. Effluents from the columns were collected and the activity of ³H and ⁹⁹Tc were determined with a liquid scintillation analyzer. The breakthrough curves of ³H and ⁹⁹Tc indicate that ⁹⁹Tc migrates a little faster than that ³H does in the aquifer.     

Composition and properties of polysaccharides from rice husk

The composition and content of polysaccharides obtained from different samples of rice husk by successive treatment with water, ammonium oxalate (or oxalic acid), and alkali were studied. The chemical composition of the rice husk residues after the extraction was examined, and the possibility of their use for preparing amorphous silica or cellulose-containing products, depending on the hydrolysis conditions, was assessed.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 11, 2004, pp. 1901–1904.Original Russian Text Copyright © 2004 by Zemnukhova, Tomshich, Mamontova, Komandrova, Fedorishcheva, Sergienko.     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.