Infrared spectra and rotational isomerism of epifluorohydrin and other propene oxide derivatives

The infrared spectrum for the vapour, liquid and solid states of epifluorohydrin has been studied, and evidence has been obtained for the presence of rotational isomers. The dominant conformer in all phases corresponds to a gauche structure, which was the only form identified in the vapour by microwave spectroscopy [1]. Similar evidence for conformational equilibria has been found for the chloro, bromo and iodo derivatives, and the enthalpy differences between the rotational isomers of these compounds were measured respectively as 4580 ± 970, 3950 ± 400, and 2350 ± 170 J mol^?1 respectively. At low temperatures, epiiodohydrin was found to crystallize in one of two possible crystalline phases. These two phases correspond to the two rotational isomeric conformations of the molecule.     

Diffusion in ethylene–propylene rubber

A study of sorption in a copolymer of ethylene and propylene is presented. Long-time sorption and desorption measurements provided the actual diffusion coefficient in the limit of zero concentration gradient. An analysis of the diffusion–sorption data reinforced the Frisch hypothesis about diffusion in a polymer matrix. The better solvent deforms the microstructure, allowing a more marked dependence of the diffusivity upon concentration.     

Reaction of Organoelement Hydrides R<Subscript>3</Subscript>EH (E = Si,Ge) with Metal <Emphasis Type="Italic">tert</Emphasis>-Butylate (M = Al,Ti)-<Emphasis Type="Italic">tert</Emphasis>-Butyl Hydroperoxide Oxidative Systems

Trialkyl(aryl)silanes and -germanes effectively react with metal (Al, Ti) tert-butylate-tert-butyl-hydroperoxide under mild conditions (room temperature, benzene or tetrachloromethane) mainly by the element-hydrogen bond. The character of the products depends on the nature of the element, the structure of the radical bound to it, and the solvent. The process is radical in nature. It includes the stages of formation of element-centered radicals and their reaction with the oxygen generated by the system. The intermediate organometallic peroxides can also acts as oxidants for the element (Si, Ge)-hydrogen bonds.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 7, 2005, pp. 1161–1170.Original Russian Text Copyright © 2005 by Stepovik, Gulenova, Martynova, Skvortsov, Cherkasov.     

Effective asymmetric synthesis of 1,2,9,9a-tetrahydrocyclopropa[c]benzo[e]indol-4-one (CBI)

A short, asymmetric synthesis of the 1,2,9,9a-tetrahydrocyclopropa[c]benzo[e]indol-4-one (CBI) analogue of the CC-1065 and duocarmycin alkylation subunits is detailed that employs an effective enzymatic desymmetrization reaction of prochiral diol 12 using a commercially available Pseudomonas sp. lipase. The optically active monoacetate (S)-13 is furnished in exceptional conversions (88%) and optical purity (99% ee) and serves as an intermediate for the preparation of either enantiomer of CBI. Similarly, the Pseudomonas sp. lipase resolved the racemic intermediate 19, affording advanced intermediates of CBI in good conversions and optical purity (99% ee), and provided an alternative approach to the preparation of optically active CBI derivatives.     

Quantitation of chlordiazepoxide and its metabolites in biological fluids by thin-layer chromatography.

Chlordiazepoxide and its 4 major metabolites were assayed after separation by thin-layer chromatography following extraction from biological fluids. The compounds become intensely fluorescent in the presence of red, fuming nitric acid. The resulting compounds are quantitated with a spectrodensitometer with a fluorescent attachment. The sensitivity varies between 0.05 and 0.1 microgram. The coefficient of variation is 1.4% for assays in urine and 6.4% in serum.     

Tuning the band gap in hybrid tin iodide perovskite semiconductors using structural templating

Structural distortions within the extensive family of organic/inorganic hybrid tin iodide perovskite semiconductors are correlated with their experimental exciton energies and calculated band gaps. The extent of the in- and out-of-plane angular distortion of the SnI4(2-) perovskite sheets is largely determined by the relative charge density and steric requirements of the organic cations. Variation of the in-plane Sn-I-Sn bond angle was demonstrated to have the greatest impact on the tuning of the band gap, and the equatorial Sn-I bond distances have a significant secondary influence. Extended Hückel tight-binding band calculations are employed to decipher the crystal orbital origins of the structural effects that fine-tune the band structure. The calculations suggest that it may be possible to tune the band gap by as much as 1 eV using the templating influence of the organic cation.     

Efficient and practical Ag-catalyzed cycloadditions between arylimines and the Danishefsky diene

An efficient Ag-catalyzed method for asymmetric addition of the Danishefsky diene to various aryl imines to afford cycloadducts in > or =89% ee and > or =85% isolated yield is reported. Reactions are effected with 0.1-1 mol % catalyst (4 degrees C), and the chiral ligand is readily prepared from commercially available materials, including the inexpensive i-Leu. These catalytic asymmetric cycloadditions can be carried out without the use of solvent or with undistilled THF in air. A first generation supported chiral catalyst that effectively promotes the cycloaddition reaction and can be recycled (five cycles) is described.     

Reactions of 1-Allenylpyrazole and 1-Allenyl-1,2,4-triazole with Hydrogen Chloride and Metal Chlorides

1-Allenylpyrazole and 1-allenyl-1,2,4-triazole react with hydrogen chloride via proton addition at the pyridine-like nitrogen atom (N² and N⁴, respectively). In the reaction with 1-allenylpyrazole, 1-[(E)-3-chloro-1-propenyl]pyrazole is also formed via regio- and stereoselective addition of hydrogen chloride to the propadienyl group. 1-Allenylpyrazole and 1-allenyl-1,2,4-triazole act as unidentate ligands with respect to Co, Ni, Cu, Zn, Cd, Pd, and Sn, the donor centers being N² and N⁴, respectively. Apart from mononuclear coordination compounds, 1-allenylpyrazole gives rise to polymeric complexes which contain units and blocks formed by the free ligand.     

Thermal rearrangements of 2-vinylcyclopropylidene to cyclopentadiene and vinylallene: a theoretical investigation

In an attempt to clarify the favored rearrangement reaction of vinylcyclopropylidenes, the prototype thermal rearrangements of singlet 2-vinylcyclopropylidene (1) leading to 1,3cyclopentadiene (2) and 1,2,4-pentatriene (vinylallene) (3) were investigated by means of ab initio quantum-mechanical electronic-structure calculations. The B3LYP functional with the 6-31G(d) basis set was employed for geometry optimization of the equilibrium and transition-state structures relevant to the two reaction pathways and for computing their harmonic vibrational frequencies. Final energies were evaluated by single-point calculations at the CCSD(T) level of theory with the 6-311 + G(3df,2p) basis set. The rearrangement of s-cis 1 to 2 is found to occur by a three-step pathway. The first step involves the formation of a nonclassical carbene (5), which is an internal pi complex between the pi molecular orbital of the double bond and the empty p atomic orbital of the carbene carbon. In the second step, the nonplanar five-membered ring geometry of 5 flattens to reach the planar structure of 3-cyclopentenylidene (4). The last step is the 1,2-migration of a alpha-hydrogen atom to the carbene center in 4. The rate-determining step for the rearrangement of s-cis 1 to 2 is the formation of 5, with a predicted global deltaG++(220 K) of only 0.6 kcalmol(-1). The rearrangement of s-trans 1 to 2 requires an initial conversion of s-trans 1 to the s-cis conformer, with a predicted deltaG++(220 K) of 1.8 kcalmol(-1). The transition structure for the ring-opening of s-trans 1 into s-trans 3 (deltaG++(220 K)=4.7 kcalmol(-1)) is more energetic than that for the ring-opening of s-cis 1 into s-cis 3 (deltaG++(220 K)=2.5 kcalmol(-2)) due to larger repulsive nonbonded H...H interactions in the former transition structure. On the basis of these results, it is suggested that if the reaction of 1,1-dibromo-2-vinylcyclopropane with methyllithium at -78 degrees C leads to the initial formation of carbene 1, then the reaction should yield 2 as the main product together with small amounts of 3. This theoretical prediction nicely agrees with experimental findings.     

Atomic spectroscopy for detection in thermal analysis

An atomic absorption spectrophotometer is coupled to a conventional thermoanalytical quartz furnace as used for TG and DTG to detect the thermally evolved products. In this combined system, the dry aerosol (smoke) obtained by cooling the vapour evolved is transported from the furnace to the flame for metal-specific atomic absorption detection. The particular design of the furnace outlet promotes the formation of stable aerosols. Optimum experimental conditions were determined, using zinc chloride solution, by varying the specimen mass, the heating rate and the flow rate of the furnace gas at a linear temperature program. The absorbancevs. temperature curves obtained with this method for various zinc compounds are compared with the corresponding DTG curves. The applicability of the technique for studying heterogeneous reactions with carbon tetrachloride and hexane vapours is presented. The utilization of an atomic absorption spectrophotometer equipped with a quartz cuvette for detecting the thermal evolution of mercury vapours is described, as well as detection potentials by molecular absorption (for NO and NH₃) and light scattering (for smoke evolved from organic matter). The results obtained with the suggested methods may, in some respects, valuably complement the results achieved with DTG and with flame ionization detection.

---

Zusammenfassung Ein Atomabsorptionsspektrometer wurde mit einem konventionellen thermoanalytischen Quarzofen gekoppelt um thermische Abspaltprodukte nachzuweisen. In diesem kombinierten System wird das durch Kühlung des entwickelten Dampfes erhaltene Aerosol (Rauch) vom Ofen in die Flamme für den metallspezifischen Atomabsorptionsnachweis übergeleitet. Die spezielle Ausbildung der Austrittsöffnung gewährleistet die Bildung eines stabilen Aerosols. Die optimalen Versuchsbedingungen wurden durch Zinkchloridlösungen bei Anderung der Probenmasse, der Aufheizgeschwindigkeit und der Strömungsgeschwindigkeit des Ofengases im linearen Temperaturprogramm ermittelt. Die mit dieser Methode für verschiedene Zinkverbindungen erhaltenen Absorptions—Temperatur-Kurven wurden mit den entsprechenden DTG-Kurven verglichen. Die Anwendbarkeit dieser Technik bei dem Studium heterogener Reaktionen mit Kohlenstofftetrachlorid und Hexandämpfen wird gezeigt. Der Einsatz eines mit einer Quarzküvette zum Nachweis der thermischen Entwicklung von Quecksilberdampf versehenen Atomabsorptionsspektrometers wird beschrieben, sowie die Nachweisgrenze durch molekulare Absorption (für NO und NH₃) und Lichtstreuung (für aus organischem Material entwickelten Rauch). Die bei den beschriebenen Methoden erhaltenen Ergebnisse können, in mancher Hinsicht, die durch DTG und Flammenionisationsnachweis erhaltenen Ergebnisse wertvoll ergänzen.

---

- , , . (), , . . , . — , , -. . - , , , ( NO NH₃) ( , ). , , , - .

---

---

Presented in part at the 24th Hungarian Conference on Analytical Sptecroscopy, Miskolc, June 15–18, 1981. Abstracts pp. 159–162.

---

The authors wish to express their thanks to S. Gál for his assistance in the present application of the temperature programmer developed by him and his group, and for the valuable discussions on the subject. Thanks are also due to K. Tomor and J. Kmives who participated in the comparative thermoanalytical measurements and their analysis.