Movement of dopants in redox reaction of electro-conductive polymers

Polypyrrole, formed in an organic solvent, shows higher density and better quality in electrical conductivity and mechanical strength than that formed in water. On electrochemical reduction in an aqueous system the laurylsulfate anion, used as dopant, sticks to the polymer. During reduction a cation moves into the polymer and on oxidation it leaves the polymer. The anion, however, leaves the polymer on reduction in an organic solvent system and cannot penetrate into the polymer on re-oxidation. The redox reaction in the aqueous system reveals a surface reaction process, while the reaction in the organic solvent system undergoes a diffusion-controlled process. This penomenon is consistant with the results of the ion concentration profile.     

Fabrication of thermo-responsive polymer nanocomposites for smart window applications

Abstract

Thermo-responsive polymers have attracted much attention in recent years because they can provide a variety of applications for smart devices, but the lack of sufficient mechanical properties and late response rate of the polymers limit their applications. In the current work, we fabricated polymer nanocomposites made from poly(vinyl methyl ether) and nanofillers with photothermal conversion property such as graphene oxide, antimony tin oxide nanoparticles, and silver nanoplates. The prepared nanocomposites showed rapidly reversible and reliable transparent-opaque transitions during the repeated heating and cooling processes, suggesting that they can be applied to smart window applications.     

Development of a Quantitative Method for Detection of Multiclass Veterinary Drugs in Feed Using Modified QuPPe Extraction and LC–MS/MS

A method was developed for the rapid and quantitative analysis of 30 veterinary drugs belonging to 17 classes (amphenicols (1), anthelmintics (1), cephalosporins (4), coccidiostats (1), lincosamides (1), macrolide (1), nitroimidazole (1), penicillins (3), phenylhydrazines (1), polypeptides (1), pyrethrins (1), quinolones (5), sulfonamides (3), tetracycline (3), neuroleptic agents (1), triazene trypanocidal agents (1), other. (1)) in feeds. The proposed method with a modified Quick Polar Pesticides (QuPPe) sample preparation was validated for the determination of 30 veterinary drugs in feed samples by liquid chromatography triple-quadrupole mass spectrometry (LC–MS/MS). The sample was extracted with methanol containing 1% acetic acid and purified by dispersive solid-phase extraction (d-SPE) with C18. Good linearity (r² ≥ 0.98) was observed, and the LOQ values ranged from 10 to 200 µg/kg. Average recoveries ranged from 70.8 to 118.4%, and the relative standard deviation was ≤ 18.7%. This validated method was used in the determination of 30 veterinary drugs in 142 feed samples obtained from South Korea. The results show that lincomycin was present in only one of the tested feed samples, although it was detected at a value lower than the LOQ. In conclusion, this multi-residue method can be used for screening through the detection and quantitation of residual multiclass veterinary drugs in feed samples.     

The Influence of Tyrosol-Enriched Rhodiola sachalinensis Extracts Bioconverted by the Mycelium of Bovista plumbe on Scopolamine-Induced Cognitive,Behavioral, and Physiological Responses in Mice

Alzheimer’s disease (AD) is an age-related neurodegenerative disorder characterized by cognitive deficits, which are accompanied by memory loss and cognitive disruption. Rhodiola sachalinensis (RSE) is a medicinal plant that has been used in northeastern Asia for various pharmacological activities. We attempted to carry out the bioconversion of RSE (Bio-RSE) using the mycelium of Bovista plumbe to obtain tyrosol-enriched Bio-RSE. The objective of this study was to investigate the effects of Bio-RSE on the activation of the cholinergic system and the inhibition of oxidative stress in mice with scopolamine (Sco)-induced memory impairment. Sco (1 mg/kg body weight, i.p.) impaired the mice’s performance on the Y-maze test, passive avoidance test, and water maze test. However, the number of abnormal behaviors was reduced in the groups supplemented with Bio-RSE. Bio-RSE treatment improved working memory and avoidance times against electronic shock, increased step-through latency, and reduced the time to reach the escape zone in the water maze test. Bio-RSE dramatically improved the cholinergic system by decreasing acetylcholinesterase activity and regulated oxidative stress by increasing antioxidant enzymes (superoxide dismutase (SOD) and catalase (CAT)). The reduction in nuclear factor erythroid 2-related factor 2 (Nrf2)/heme oxygenase-1 (HO-1) signaling in the brain tissue due to scopolamine was restored by the administration of Bio-RSE. Bio-RSE also significantly decreased amyloid-beta 1–42 (Aβ1–42) and amyloid precursor protein (APP) expression. Moreover, the increased malondialdehyde (MDA) level and low total antioxidant capacity in Sco-treated mouse brains were reversed by Bio-RSE, and an increase in Nrf2 and HO-1 was also observed. In conclusion, Bio-RSE protected against Sco-induced cognitive impairment by activating Nrf2/HO-1 signaling and may be developed as a potential beneficial material for AD.     

Die Bestimmung der Oxybutters?ure

Ohne Zusammenfassung     

Soft‐Chemical Exfoliation Route to Layered Cobalt Oxide Monolayers and Its Application for Film Deposition and Nanoparticle Synthesis

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau‐like height profile with nanometer‐level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross‐confirmed by X‐ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in‐plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected‐area electron diffraction and Co K‐edge X‐ray absorption near‐edge structure analysis. The zeta‐potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of ≈10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.     

Pretreatment of wastepaper and pulp mill sludge by aqueous ammonia and hydrogen peroxide

Pretreatment of two different softwood-based lignocellulosic wastes (newsprint and Kraft pulp mill sludge) was investigated. Pretreatment was done by aqueous ammonia and hydrogen peroxide (H₂O₂), two delignifying reagents that are environmentally benign. Three different treatment schemes were employed: aqueous ammonia alone (ammonia recycled percolation [ARP]), mixed stream of aqueous ammonia and H₂O₂ and successive treatment with H₂O₂ and aqueous ammonia. In all cases there was a substantial degree of delignification ranging from 30 to 50%. About half of the hemicellulose sugars were dissolved into the process effluent. Retention of cellulose after pretreatment varied from 85 to 100% for newspaper feedstock and from 77 to 85% for the pulp mill sludge. After treatment with aqueous ammonia alone (ARP), the digestibility of newspaper and the pulp mill sludge was improved only by 5% (from 40 to 45% for the former and from 68 to 73% for the latter), despite a substantial degree of delignification occurring after the ARP process. The lign in content thus did not correlate with the digestibility for these substrates. Simultaneous treatment with H₂O₂ and aqueous ammonia did not bring about any significant improvement in the digestibility over that of the ARP. A succcessive treatment by H₂O₂ and ARP showed the most promise because it improved the digestibility of the newspaper from 41 to 75%, a level comparable to that of α-cellulose.     

Synthesis and size control of monodisperse copper nanoparticles by polyol method

We describe herein the synthesis of metallic copper nanoparticles in the presence of poly(vinylpyrrolidone), employed as a protecting agent, via a polyol method in ambient atmosphere. The obtained copper particles were confirmed by XRD to be crystalline copper with a face-centered cubic (fcc) structure. We observed monodisperse spherical copper nanoparticles with a diameter range 45+/-8 nm. The particle size and its distribution are controlled by varying the synthesis parameters such as the reducing agent concentration, reaction temperature, and precursor injection rate. The precursor injection rate plays an important role in controlling the size of the copper nanoparticles. On the basis of XPS and HRTEM results, we demonstrate that the surface of the copper is surrounded by amorphous CuO and that poly(vinylpyrrolidone) is chemisorbed on the copper surface.     

A new [Ni4] distorted cubane assembly on four solvent derived μ3-OMe corners: Solvent dependent formation and cleavage of exogenous bridges

A new Ni₄ distorted cubane complex [Ni₄(μ₃-OMe)₄Q₄(MeOH)₄] (1) (where Q⁻ is the anion of 8-quinolinol) is obtained from the reaction of NaQ with Ni(OAc)₂ · 4H₂O in refluxing MeOH via solvent derived μ₃-OMe assisted self-assembly of four nickel(II) centres. The periphery of [Ni₄(OMe)₄] cubane is covered by four Q⁻ and four MeOH molecules. This methanol specific reaction is not supported in solvent glycinol (Hgl; NH₂(CH₂)₂OH), an amine substituted ethanol, producing monomeric [NiQ₂(Hgl)₂] · 2H₂O (2 · 2H₂O) instead and is able to cleave 1 to yield 2 · 2H₂O. The cryomagnetic susceptibility data of powdered 1 can be modeled by a two J equation yielding J₁ = −1.8(1) cm⁻¹, J₂ = 3.9(1) cm⁻¹ and g = 2.24.