Three-dimensional biomolecule patterning

A new method is demonstrated, where three-dimensional protein structures are made by employing multi-photon polymerization and photobiotin photolysis. The technique enables the construction of arbitrary two- and three-dimensional shapes with submicron resolution. The integrity of the immobilized biotin is confirmed by derivatization with fluorescently labeled streptavidin. Fluorescence microscopy is used in order to visualize the distribution of fluorescent streptavidin on the 3D structure.     

Cationic star polymer siRNA transfectants interconnected with a piperazine-based cationic cross-linker

Cationic star polymers of 2-(dimethylamino)ethyl methacrylate (DMAEMA) were prepared via the “arm-first” method under group transfer polymerization (GTP) conditions, and were interconnected using a novel, hydrophilic, positively ionizable dimethacrylate cross-linker which is essentially the cyclic dimer of DMAEMA, thus ensuring that the building units of the arms and the core of the star polymers were identical. After their physicochemical characterization, these star-like polyamines were evaluated for their ability to transfer small interfering RNA (siRNA) to murine myoblast cells. Suppression efficiency was found to increase with polymer loading and star branch size, attaining sufficiently high values, comparable to that observed with standard non-viral siRNA transfection systems, while cytotoxicity was kept reasonably low.     

The effect of ionic and electronic properties of titanium oxide on the electrochemical growth and redox behavior of polyaniline on titanium surfaces

Polyaniline (PANI) was electrodeposited directly from aniline (ANI)-containing sulfuric acid media on Ti|TiO₂ electrodes, which were prepared in ANI-free 0.5 M H₂SO₄ solution by applying suitable anodization conditions in order to control the donor density (N _D) in the oxide layer of a fixed thickness. By using the suggested procedure, reproducible conditions for the cyclic voltammetric growth of PANI on Ti can be achieved, and most importantly, the properties of Ti|TiO₂|PANI electrodes can be modulated to meet the requirements for specific applications. The polymerization rate and the deposited amount of PANI were found to depend strongly on the N _D estimated by Mott-Schottky analysis. The redox behavior of the resulted Ti|TiO₂|PANI electrodes indicated differences in acid solutions as compared with the corresponding behavior of other PANI-modified metal surfaces. Analysis of the anodic and cathodic electrochemical response of the prepared Ti|TiO₂|PANI electrodes discloses the significant role of ionic and electronic properties of the intervening oxide between the metal support and PANI.     

d- and l-Erythrose as sources of chiral quaternary carbon centers. Total synthesis of (−)-malyngolide and (+)-tanikolide

A highly efficient and versatile approach was applied for the total synthesis of the marine natural products (−)-malyngolide and (+)-tanikolide from isopropylidene l- and d-erythrose, using a common strategy.     

Determination of dimethoate and omethoate in human serum samples. Risk assessment for the operator

A simple and effective analytical procedure has been developed for the determination of dimethoate (DIM) residues and its metabolite, omethoate, in serum samples of pesticide operators. For the selection of the most appropriate method for sample treatment, techniques such as headspace solid phase micro extraction and solid phase extraction and liquid–liquid extraction were applied. The applied method was based on toluene (2?mL) extraction of a 0.5?mL serum sample. In this report, it was observed that DIM concentration level affected the ratio of the area response of DIM and one of its oxygenated metabolite, omethoate. In this context, higher concentrations favoured the predominance of DIM while lower concentrations lead to the formation of omethoate. The method was validated using human serum samples spiked with DIM. Good linearity was obtained in the range of 1–10?ng/mL co-calculating DIM and omethoate. Various concentrations of DIM were mixed with serum and stored up to five days at ?20°C. Recoveries ranged from 72% to 88% at two spiking levels for six replicates. The detection and quantification limit were calculated at 0.12 and 0.36?ng/mL of serum, respectively. Finally the comparison with the Acceptable Operator Exposure Level (AOEL) of DIM revealed that the maximum exposure of the operators reached the 30% of the AOEL for only two cases.     

Rapid determination of fosetyl-aluminium in commercial pesticide formulations by high-performance liquid chromatography

An isocratic reversed-phase high-performance liquid chromatographic (RP-HPLC) method with diode array detection (DAD) was developed for the determination of aluminium tris(ethyl phosphonate) (fosetyl-aluminium, fosetyl-Al) in plant-protection products. The method involves extraction of the active ingredient by sonication of the sample with water and direct measurement by RPHPLC. The isocratic RP-HPLC method for the analysis of fosetyl-Al thus developed was then validated for specificity, linearity, precision, and accuracy. The chromatographic peak confirmation was performed by LC-MS using electron spray ionisation in the negative-ion mode. The repeatability of the method, expressed as relative standard deviation (RSD, %), was found to be 0.5 % and the limit of detection was 0.035 mg mL^?1. The average recoveries of the three fortification levels varied from 96.7 % to 100.6 % and the RSDs ranged between 2.6 % and 6.3 %. The precision of the method was also considered to be acceptable as the experimental repeatability relative standard deviation (RSD_r) was lower than the RSD_r, calculated using the Horwitz equation. The method is rapid, simple, accurate, cost-effective, and provides a new and reliable means for the analysis of fosetyl-Al in formulated products.     

Pitfalls in drying oils identification in art objects by gas chromatography

Drying oils identification in art objects is an important step in the scientific investigation of the artifact which provides conservators and art historians with valuable information concerning materials used and painting techniques applied. The present communication is devoted to pitfalls and troubleshooting in drying oils identification by means of GC-MS analysis of fatty acids composition in a microsample of an art object. We demonstrate that in the case of nonlinear instrument response the ratios of palmitic to stearic (P/S), distinctive for each oil type and used for drying oil identification, depend on sample dilution so that different dilutions of the same sample can give different P/S ratios. This phenomenon can hinder drying oil identification and lead to erroneous interpretations. This is an important observation as nowadays very often the P/S ratio is calculated from the corresponding peak area ratios or by the use of one-point calibration method. In these approaches, the linearity of the instrument response is not controlled and ensured. In the case analyzed, the nonlinear instrument response was attributed to incomplete sample evaporation in the injector. Packing of the glass liner with deactivated glass wool improved the sample evaporation and ensured the linearity of the instrument response and independence of the P/S ratio from sample dilution.