摩擦点火Ti-V-Cr阻燃钛合金燃烧产物的组织特征

采用摩擦氧浓度实验方法, 结合原位观察、扫描电镜、能谱仪和X-射线衍射分析, 系统研究Ti-V-Cr 阻燃钛合金燃烧产物的微观组织形貌、燃烧反应过程的合金元素分布规律及微观机理. 结果表明: Ti-V-Cr 阻燃钛合金燃烧过程发出闪亮耀眼的白光, 具有典型金属燃烧的火焰特征. 燃烧产物主要有TiO₂, V₂O₅和Cr₂O₃三种氧化物, 该混合氧化物以分散颗粒和致密连续体存在. 分散颗粒为规则的球形; 致密连续燃烧产物的微观组织具有分区特征, 从合金基体至燃烧表面依次为过渡区、热影响区、熔凝区和燃烧区. 其中, 过渡区存在一些微小的颗粒状凸起, 且有一定方向性; 热影响区中形成大量V基固溶体相和少量的Ti基固溶体相, V基固溶体相上存在Ti的含量远高于基体的针状析出物; 熔凝区中, 大量的Ti基固溶体中存在少量的V基固溶体; 燃烧区主要为Ti, V和Cr的氧化物混合物. 热影响区的V基固溶体相降低了Ti元素向熔凝区的迁移速率, 减慢了燃烧区Ti与O的优先反应; 燃烧区形成的TiO₂, V₂O₅和Cr₂O₃混合氧化物和熔凝区O在Ti中大量固溶共同终止了O向合金基体的继续扩散, 从而使Ti-V-Cr阻燃钛合金表现出优异的阻燃功能性.     

自聚焦透镜高效批量加工的双面研磨抛光法研究

依据双面研磨抛光原理,提出了加工自聚焦透镜平面和斜面辅助工装设计.从工艺技术特点和生产实际过程等方面对设计的工装使用情况进行分析验证.多次大批量加工实践证明,该辅助工装的设计完全满足了自聚焦透镜高效批量加工技术要求,简化整个生产线工艺,减少工艺流程时间,降低材辅料的消耗成本,从而验证了双面研磨抛光法是一种实用的加工自聚焦透镜的新方法.     

BEPCⅡ直线加速器重大改造和束流调试进展

BEPCⅡ直线加速器的重大改造旨在获得高流强、小发射度和小能散的正负电子束, 以满足对撞机亮度提高两个两级的要求. 这对直线加速器各系统和束流物理是一个挑战. 文章介绍了直接决定束流性能的新电子源、新正电子源、新微波功率源、相位控制系统和束流测量系统等的改造情况; 叙述了束流物理研究; 介绍了束流调试进展情况和进一步改进计划.     

Vacancy defects in delafossite СuАlO<Subscript>2</Subscript>: First-principles calculations

Electronic properties and formation energies of vacancy defects in delafossite CuAlO₂ have been investigated by using the first-principles density functional theory. The band structures and density of states of various vacancy defects have been obtained and analyzed. The results show that the V _Cu systems with different charge states influence the type of conductivity. The introduced vacancy defects enhance the hybridization between O-2p and Cu-3d states, which is good for p-type conductivity. The calculated formation energies indicate that the Cu vacancy is relatively easy to form and it trends to have positive charge.     

低阈值单横模852nm半导体激光器

基于波导理论、等效折射率方法,设计并制备了非对称波导隔离双沟结构脊型边发射激光器,最终获得了低闽值单基侧模852 nm激光器.详细研究了不同脊型台深宽比参数设计对激光器侧向模式特性的影响规律,实现了腔面未镀膜情况下脊型波导边发射激光器的单基侧模稳定输出,同时激射波长可以精确调谐到852 nm;工作电流达到150 mA,工作温度30℃;斜率效率最高可达0.89 nW/mA,光谱半宽小于1 nm.研究结果为进一步实现超窄线宽激光器提供了参考和借鉴,并且为实现激光器稳定输出提供了实验基础.     

Some New Features in the Pseudoscalar Meson and Vector Meson Photoproductions

We investigate the role of the t-channel meson exchange in various photoproduction processes to discuss features of the respective production mechanism. For the less model-dependent analysis we work with the t-channel meson pole reggeized in the Born approximation amplitude. With the meson–baryon coupling constants chosen consistently with symmetry prediction we show that the Reggeized pole model could reproduce the experimental data to a good degree in the lower energy region. Numerical consequences show the significance of the tensor meson exchange in the γ p → K ⁺Λ, the dominance of the pseudoscalar meson exchange in the πΔ (and KΣ*) processes, and the sizable role of the vector-meson magnetic moment in the charged ρ (and K*) photoproductions, respectively. These new features from the present analyses could provide a useful guide for future study of the N* resonances in the low energy region.     

高压拉曼光谱方法研究卟啉J-聚集体

本文利用金刚石对顶砧(DAC)和拉曼光谱技术,测量了四苯基卟啉J聚集体在13GPa内的高压拉曼光谱,根据各个拉曼谱带的频移-压强变化曲线得出在13GPa内Tpp J聚集体无相变发生,并且高波数(1010～1600cm-1)和低波数(230～330cm-1)区的斜率要远大于中等波数(380～1000cm-1)区,这表明对应于高波数和低波数区的化学键比中等波数区更具有易压缩性,并对体积的减小起着重要的作用。根据苯环ψ3C-C面内伸缩振动模式强度逐渐增强的现象提出了分子弹簧垫圈模型。此外,这种分子弹簧垫圈的劲度系数可以通过中位取代基团调控。     

Electron-beam deposition of vanadium dioxide thin films

Developing a reliable and efficient fabrication method for phase-transition thin-film technology is critical for electronic and photonic applications. We demonstrate a novel method for fabricating polycrystalline, switchable vanadium dioxide thin films on glass and silicon substrates and show that the optical switching contrast is not strongly affected by post-processing annealing times. The method relies on electron-beam evaporation of a nominally stoichiometric powder, followed by fast annealing. As a result of the short annealing procedure we demonstrate that films deposited on silicon substrates appear to be smoother, in comparison to pulsed laser deposition and sputtering. However, optical performance of e-beam evaporated film on silicon is affected by annealing time, in contrast to glass.     

Measurement of branching fractions for B-->eta(c)K(*) decays

We report measurements of branching fractions for charged and neutral B-->eta(c)K decays where the eta(c) meson is reconstructed in the K(0)(S)K+/-pi(-/+), K+K-pi(0), K(*0)K-pi(+), and pp; decay channels. The neutral B0 channel is a CP eigenstate and can be used to measure the CP violation parameter sin(2phi(1). We also report the first observation of the B0-->eta(c)K(*0) mode. The results are based on an analysis of 29.1 fb(-1) of data collected by the Belle detector at KEKB.     

Molecular transient effects in K-band spectroscopy

The time dependence of microwave transient absorption and emission was measured forJ=2←1 of the OCS molecule under on- and off-resonant conditions by the technique of Stark switching. The results are analyzed with the theory of a coherent electromagnetic wave interacting with a two-level quantum system through the electric dipole interaction to obtain the pressure dependence of the relaxation timesT ₂ and in consequence the pressure broadening parameterC _w=26.7±0.9 (μs·mTorr)^?1 has been obtained.