水溶性聚合物和两亲聚合物:12.环氧乙烷-环氧丙烷无规共聚醚结构与性能的关系

来用连续加料法,以二元醇-KOH为引发剂合成一组不同组成的环氧乙烷-环氧丙烷无规共聚醚,并用核磁共振、红外光谱、示差扫描量热计和热失重等方法对其本体聚合物,用浊点和表面张力测定的方法对其水溶液,进行系统的表征。     

熔盐电解合成希土六硼化物的研究——REBO3、LiBO2和LiF体系熔盐电解合成RER6

本文在800℃和空气中电解REBO₃-LiBO₂-LiF熔盐体系合成了单相的REB₆.石墨川埚兼作容器和阳极.耐火金属棒如Cu和Mo等被悬吊在电解质中作为阴极.根据似二元体系LiBO₂-LiF和LiBO₂-LaBO₃的低熔点组成以La₂O₃、B₂O₃、Li₂CO₃和LiF为原料找到了具有较低熔点的熔盐体系.根据X射线粉末衍射,该熔体是由REBO₃、LiBO₂和LiF三个物相组成.     

Drug-carrying latices for prolonged release of drugs

Dichlorophene was used as a model drug. Drug-carrying latex particles were prepared by soap-free emulsion copolymerization of dichlorophene acrylate with some hydrophilic methacrylate comonomers. The comonomers used affected not only the structure and colloidal stability of particles, but also the drug-activity of particles. Preliminary study of the drug activity revealed that highly hydrophilic latex particles were very stable and too inactive to be engulfed by amoebae and kill them. On the contrary, less hydrophilic particles carrying a large amount of drug can be an effective device to release drugs at a moderate rate to fight against extracelluar targets such as parasites.     

Non-destructive determination of spontaneously fissioning nuclides by neutron coincidence counting using multichannel time spectroscopy

A non-destructive method for determining the amount of actinoids has been developed. The method is based on thermal neutron coincidence counting and employs a selective detection of neutrons resulting from the spontaneous fission of actinoids. The detection system is described in detail and the measurement results of²⁴⁴Cm as an example are presented. The results show that the measured fission rate of²⁴⁴Cm is consistent with the fission rate calculated from ENDF/B-V data and that the amount of²⁴⁴Cm can be determined within about 5% accuracy even in the presence of a large amount of actinoids, for example, up to 2.6·10⁶, 3.6·10⁴, or 1.6·10³ times in the mass ratio of²³⁹Pu,²⁴¹Am, or²⁴⁰Pu to²⁴⁴Cm, respectively.     

铜离子交换改性的沸石催化剂上甲烷的非氧芳构化

已有研究表明，ＭｏＯ３／ＨＺＳＭ５是甲烷非氧芳构化的优良催化剂，在９７３Ｋ下甲烷转化率达６％～８％，苯选择性高于８０％，这为非氧气氛下甲烷的芳构化反应展示了非常诱人的前景［１～１２］．但是，该催化剂的活性和稳定性尚有待进一步提高，目前已有使用Ｐｔ，...     

铜（Ⅱ）－4－（吡啶－2′－甲基）－1，4，7，10－四氮杂环十三烷－11，13－二酮－α－氨基酸（5－取代邻菲罗啉）三元配合物的稳定性研究

用ｐＨ法在２５．０±０．１℃，Ｉ＝０．１ｍｏｌ·ｄｍ－３ＫＮＯ３条件下，测定铜（Ⅱ）－４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮－α－氨基酸（５－取代邻菲罗啉）三元配合物的稳定常数；比较了带吡啶甲基二氧四胺大环配体和二氧四胺大环配体与Ｃｕ（Ⅱ）的配位能力、配位方式；研究了该三元体系配合物稳定性与配体α－氨基酸酸碱强度之间的直线自由能关系；探讨了Ｃｕ（Ⅱ）和５－取代邻菲罗啉之间的ｄ－ｐ反馈π键以及邻菲罗啉取代基Ｈａｍｍｅｔｔ诱导效应与该三元配合物稳定性之间的关系。讨论了４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮和４－（喹啉－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮与Ｃｕｘｐｈｅｎ所形成配合物的不同空间结构及其对配合物稳定性产生的影响。     

Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.     

有机金属络合物用于高分子富氧膜的研究进展

本文介绍了能够可逆吸附分子氧的有机金属络合物用于高分子富氧膜的研究进展，以及以双重吸附理论进行的膜的促进输送机理。