Hydrolates from lavender (Lavandula angustifolia) – their chemical composition as well as aromatic,antimicrobial and antioxidant properties

It was shown that the method for obtaining hydrolates from lavender (Lavandula angustifolia) influences the content of active compounds and the aromatic, antimicrobial and antioxidant properties of the hydrolates. The content of volatile organic compounds ranged from 9.12 to 97.23 mg/100 mL of hydrolate. Lavender hydrolate variants showed low antimicrobial activity (from 0% to 0.05%). The radical scavenging activity of DPPH was from 3.6 ± 0.5% to 3.8 ± 0.6% and oxygen radical absorbance capacity (ORAC_FL) results were from 0 to 266 μM Trolox equivalent, depending on the hydrolate variant.     

On an equation characterizing multi-Jensen-quadratic mappings and its Hyers–Ulam stability via a fixed point method

In this paper, we unify the system of functional equations defining a multi-Jensen-quadratic mapping to obtain a single equation. We also prove, using the fixed point method, the generalized Hyers–Ulam stability of this equation both in Banach spaces and in complete non-Archimedean normed spaces.     

On Hyers–Ulam stability of two functional equations in non-Archimedean spaces

In this paper we prove, using the fixed point method, the generalized Hyers–Ulam stability of two functional equations in complete non-Archimedean normed spaces. One of these equations characterizes multi-Cauchy–Jensen mappings, and the other gives a characterization of multi-additive-quadratic mappings.     

Ab initio evaluation of the thermodynamic and electrochemical properties of alkyl halides and radicals and their mechanistic implications for atom transfer radical polymerization

High-level ab initio molecular orbital calculations are used to study the thermodynamics and electrochemistry relevant to the mechanism of atom transfer radical polymerization (ATRP). Homolytic bond dissociation energies (BDEs) and standard reduction potentials (SRPs) are reported for a series of alkyl halides (R-X; R = CH 2CN, CH(CH 3)CN, C(CH 3) 2CN, CH 2COOC 2H 5, CH(CH 3)COOCH 3, C(CH 3) 2COOCH 3, C(CH 3) 2COOC 2H 5, CH 2Ph, CH(CH 3)Ph, CH(CH 3)Cl, CH(CH 3)OCOCH 3, CH(Ph)COOCH 3, SO 2Ph, Ph; X = Cl, Br, I) both in the gas phase and in two common organic solvents, acetonitrile and dimethylformamide. The SRPs of the corresponding alkyl radicals, R (*), are also examined. The computational results are in a very good agreement with the experimental data. For all alkyl halides examined, it is found that, in the solution phase, one-electron reduction results in the fragmentation of the R-X bond to the corresponding alkyl radical and halide anion; hence it may be concluded that a hypothetical outer-sphere electron transfer (OSET) in ATRP should occur via concerted dissociative electron transfer rather than a two-step process with radical anion intermediates. Both the homolytic and heterolytic reactions are favored by electron-withdrawing substituents and/or those that stabilize the product alkyl radical, which explains why monomers such as acrylonitrile and styrene require less active ATRP catalysts than vinyl chloride and vinyl acetate. The rate constant of the hypothetical OSET reaction between bromoacetonitrile and Cu (I)/TPMA complex was estimated using Marcus theory for the electron-transfer processes. The estimated rate constant k OSET = approximately 10 (-11) M (-1) s (-1) is significantly smaller than the experimentally measured activation rate constant ( k ISET = approximately 82 M (-1) s (-1) at 25 degrees C in acetonitrile) for the concerted atom transfer mechanism (inner-sphere electron transfer, ISET), implying that the ISET mechanism is preferred. For monomers bearing electron-withdrawing groups, the one-electron reduction of the propagating alkyl radical to the carbanion is thermodynamically and kinetically favored over the one-electron reduction of the corresponding alkyl halide unless the monomer bears strong radical-stabilizing groups. Thus, for monomers such as acrylates, catalysts favoring ISET over OSET are required in order to avoid chain-breaking side reactions.     

Adding Plasticizer Dispersible Conducting Polymer to the Ion-selective Membrane Composition – Revitalizing Single Piece Ion-selective Electrodes Concept

Typically, ion-selective electrodes used in current triggered electrochemical sensing apply a conducting polymer layer covered with an ion-selective membrane. In this work we propose an ion-selective membrane containing a dispersed conducting polymer. Thus obtained system allows elimination of the Achilles hell of heterogeneous ion-selective membranes containing solid particulates dispersed within the ion-selective polymeric membrane. The herein proposed system, even for high conducting polymer loading equal to 5 % w/w, is characterized with insensitivity towards redox interferences, as well as potentiometric detection limits, selectivity well comparable with that for other ion-selective electrodes constructions. Under voltammetric conditions, with increasing loading of the conducting polymer in the membrane cathodic peak potentials are shifted towards more negative values, yet the linear dependence of the peak potential on logarithm of concentration of the analyte in the solution is preserved.     

Structure and electrochemical properties of magnetite and polypyrrole nanocomposites formed by pyrrole oxidation with magnetite nanoparticles

Nanocomposite of magnetic Fe₃O₄ nanoparticles and polypyrrole was prepared under sonication by a new chemical polymerization method during which Fe₃O₄ nanoparticles acted both as a pyrrole oxidant and as a component in the composite material. Synthesis of this nanocomposite was carried out in aqueous solution acidified to pH 2, a prerequisite for the formation of these types of material and to facilitate pyrrole oxidation by Fe₃O₄ nanoparticles. In this way, two kind of materials were produced: Fe₃O₄/PPy nanocomposite in which magnetite nanoparticles were dispersed in PPy matrix and Fe₃O₄-aggregates@PPy nanocomposite that exhibits structure in which aggregates of magnetite nanoparticles are surrounded by a layer of polymeric phase. In the latter case, the polymerization process took place in the presence of a surfactant. These nanocomposites were characterized by electron microscopy techniques, IR spectroscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy and thermogravimetry. Particular attention was focused on the study of the electrochemical properties of the formed composites. The composite of Fe₃O₄ and PPy exhibits reversible electrochemical behaviour upon oxidation. The electrode process of the polymeric component oxidation in organic solvents such as acetonitrile and dichloromethane is very similar to the process in an aqueous solution.

     

Tribochemically Controlled Atom Transfer Radical Polymerization Enabled by Contact Electrification

Traditional mechanochemically controlled reversible-deactivation radical polymerization (RDRP) utilizes ultrasound or ball milling to regenerate activators, which induce side reactions because of the high-energy and high-frequency stimuli. Here, we propose a facile approach for tribochemically controlled atom transfer radical polymerization (tribo-ATRP) that relies on contact-electro-catalysis (CEC) between titanium oxide (TiO₂) particles and CuBr₂/tris(2-pyridylmethylamine (TPMA), without any high-energy input. Under the friction induced by stirring, the TiO₂ particles are electrified, continuously reducing CuBr₂/TPMA into CuBr/TPMA, thereby conversing alkyl halides into active radicals to start ATRP. In addition, the effect of friction on the reaction was elucidated by theoretical simulation. The results indicated that increasing the frequency could reduce the energy barrier for the electron transfer from TiO₂ particles to CuBr₂/TPMA. In this study, the design of tribo-ATRP was successfully achieved, enabling CEC (ca. 10 Hz) access to a variety of polymers with predetermined molecular weights, low dispersity, and high chain-end fidelity.     

Application of thermal analysis methods for characterization of polymer/montmorillonite nanocomposites

Thermal analysis is a useful tool for investigating the properties of polymer/clay nanocomposites and mechanisms of improvement of thermal properties. This review work presents examples of applications of differential scanning calorimetry (DSC), modulated temperature differential scanning calorimetry (MT-DSC), dynamic mechanical thermal analysis (DMA), thermal mechanical analysis (TMA), thermogravimeric analysis (TG) and thermoanalytical methods i.e. TG coupled with Fourier transformation infrared spectroscopy (TG-FTIR) and mass spectroscopy (TG-MS) in characterization of nanocomposite materials. Complex behavior of different polymeric matrices upon modification with montmorillonite is briefly discussed.     

Synthesis of eta1-borazine complexes of palladium and platinum

The eta(1)-borazine complexes trans-[(Cy(3)P)(2)M(Br)(Br(2)B(3)N(3)H(3))] (Cy = cyclohexyl) were prepared by oxidative addition of a B-Br bond of (BrBNH)(3) to [M(PCy(3))(2)] (M = Pd, Pt). Furthermore the platinum compound was converted into the T-shaped cationic complex trans-[(Cy(3)P)(2)Pt(Br(2)B(3)N(3)H(3))][BAr(f)(4)] [Ar(f) = 3,5-(CF(3))(2)C(6)H(3)] by addition of Na[BAr(f)(4)].     

Elastic properties of soft sphere crystal from Monte Carlo simulations

Elastic properties of faced centered cubic (fcc) crystals composed of soft spheres, interacting through potentials of the form u(r) ~ r(-n), have been investigated by Monte Carlo (MC) simulations. It is shown that both the softness parameter (n(-1)) and temperature strongly influence the elastic properties of the studied system. The simulations show explicitly that when T > 0 the elastic constants of the hard sphere crystal can be obtained by taking the limit n --> infinity of soft spheres. When T --> 0 for any finite n, the elastic constants of the soft spheres tend to those of the static model. At all temperatures and softness parameters studied here, n, the Poisson's ratio in [110] (perpendicular direction) is negative.