From weak interactions to covalent bonds: a continuum in the complexes of 1,8-bis(dimethylamino)naphthalene

Experimental charge density distributions in a series of ionic complexes of 1,8-bis(dimethylamino)naphthalene (DMAN) with four different acids: 1,2,4,5-benzenetetracarboxylic acid (pyromellitic acid), 4,5-dichlorophthalic acid, dicyanoimidazole, and o-benzoic sulfimide dihydrate (saccharin) have been analyzed. Variation of charge density properties and derived local energy densities are investigated, over all inter- and intramolecular interactions present in altogether five complexes of DMAN. All the interactions studied [[O...H...O](-), C[bond]H...O, [N[bond]H...N](+), O[bond]H...O, C[bond]H...N, C pi...N pi, C pi...C pi, C[bond]H...Cl, N[bond]H(+)] follow exponential dependences of the electron density, local kinetic and potential energies at the bond critical points on the length of the interaction line. The local potential energy density at the bond critical points has a near-linear relationship to the electron density. There is also a Morse-like dependence of the laplacian of rho on the length of interaction line, which allows a differentiation of ionic and covalent bond characters. The strength of the interactions studied varies systematically with the relative penetration of the critical points into the van der Waals spheres of the donor and acceptor atoms, as well as on the interpenetration of the van der Waals spheres themselves. The strong, charge supported hydrogen bond in the DMANH(+) cation in each complex has a multicenter character involving a [[Me(2)N[bond]H....NMe(2)](+)....X(delta-)] assembly, where X is the nearest electronegative atom in the crystal lattice.     

All-solid-state reference electrodes based on conducting polymers

A novel construction of solution free (pseudo)reference electrodes, compatible with all-solid-state potentiometric indicator electrodes, has been proposed. These electrodes use conducting polymers (CP): polypyrrole (PPy) or poly(3,4-ethylenedioxythiophene) (PEDOT). Two different arrangements have been tested: solely based on CP and those where the CP phase is covered with a poly(vinyl chloride) based outer membrane of tailored composition. The former arrangement was designed to suppress or compensate cation- and anion-exchange, using mobile perchlorate ions and poly(4-styrenesulfonate) or dodecylbenzenesulfonate anions as immobilized dopants. The following systems were used: (i) polypyrrole layers doped simultaneously by two kinds of anions, both mobile and immobilized in the polymer layer; (ii) bilayers of polypyrrole with anion exchanging inner layer and cation-exchanging outer layer; (iii) polypyrrole doped by surfactant dodecylbenzenesulfonate ions, which inhibit ion exchange on the polymer/solution interface. For the above systems, recorded potentials have been found to be practically independent of electrolyte concentration. The best results, profound stability of potentials, have been obtained for poly(3,4-ethylenedioxythiophene) or polypyrrole doped by poly(4-styrenesulfonate) anions covered by a poly(vinyl chloride) based membrane, containing both anion- and cation-exchangers as well as solid potassium chloride and silver chloride with metallic silver. Differently to the cases (i)-(iii) these electrodes are much less sensitive to the influence of redox and pH interferences. This arrangement has been also characterized using electrochemical impedance spectroscopy and chronopotentiometry.     

Application of electrospray ionization mass spectrometry for studies of anionic σ-adducts of aromatic nitrocompounds

It has been found that anionic σ-adducts formed in the reactions of highly electrophilic nitroarenes with selected carbanions, alkoxide anions and amines can be transferred to the gas phase using an electrospray ion source and the resulting ions can be studied using various mass spectrometry techniques in the solvent-free environment. This method can also be used for estimating the relative equilibrium constants of the σ-adduct formation reactions in a liquid phase.     

SPECTRAL AND PHOTOCHEMICAL PROPERTIES OF CURCUMIN

Curcumin, bis(4-hydroxy-3-methoxyphenyl)-l,6-heptadiene-3,5-dione, is a natural yellow-orange dye derived from the rhizome of Curcuma longa, an East Indian plant. In order to understand the photobiology of curcumin better we have studied the spectral and photochemical properties of both curcumin and 4-(4-hydroxy-3-methoxy-phenyl)-3-buten-2-one (hC, half curcumin) in different solvents. In toluene, the absorption spectrum of curcumin contains some structure, which disappears in more polar solvents, e.g. ethanol, acetonitrile. Curcumin fluorescence is a broad band in acetonitrile (λ_max= 524 nm), ethanol (λ_max= 549 nm) or micellar solution (λ_max= 557 nm) but has some structure in toluene (λ_max= 460, 488 nm). The fluorescence quantum yield of curcumin is low in sodium dodecyl sulfate (SDS) solution (φ= 0.011) but higher in acetonitrile (φ= 0.104). Curcumin produced singlet oxygen upon irradiation (φ > 400 nm) in toluene or acetonitrile (Φ= 0.11 for 50 μM curcumin); in acetonitrile curcumin also quenched ¹O₂ (k_q, = 7 × 10⁶ M^?1 s^?1). Singlet oxygen production was about 10 times lower in alcohols and was hardly detectable when curcumin was solubilized in a D₂O micellar solution of Triton X-100. In SDS micelles containing curcumin no singlet oxygen phosphorescence could be observed. Curcumin photogenerates superoxide in toluene and ethanol, which was detected using the electron paramagnetic resonance/spin-trapping technique with 5,5-dimethyl-pyrroline-.N-oxide as a trapping agent. Unidentified carbon-centered radicals were also detected. These findings indicate that the spectral and photochemical properties of curcumin are strongly influenced by solvent. In biological systems, singlet oxygen, superoxide and products of photodegradation may all participate in curcumin phototoxicity depending on the environment of the dye.     

Synthesis of 1-(3-(1,2,4-triazol-1-yl)-2,3,6-trideoxy-L-arabino-hexofuranosyl)uracils via an α,β-unsaturated aldehydrohexose

Summary Mercuric catalyzed hydrolysis of acetylatedL-rhamnal1 gave the ,-unsaturated aldehyde2. 1,2,4-Triazole was coupled, in a Michael type addition reaction, to2 at C-3 in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) to give, after acetylation at the anomeric center, an anomeric mixture of 1,5-di-O-acetyl-3-(1,2,4-triazol-1-yl)-2,3,6-trideoxy-L-arabino-hexofuranose (3). Reaction of3 with silylated 2,4-dihydroxypyrimidines4 in the presence of trimethylsilyl triflate as catalyst followed by deprotection with 33% methylamine in absolute ethanol afforded the corresponding nucleosides7 and8.

---

Synthese von 1-(3-(1,2,4-Triazol-1-yl)-2,3,6-trideoxy-L-arabino-hexofuranosyl)uracilen über eine ,-ungesättigte Aldohexose

Zusammenfassung Die quecksilberkatalysierte Hydrolyse von acetyliertemL-Rhamnal1 ergab die ,-ungesättigten Aldehyde2. 1,2,3-Triazol wurde in Gegenwart von 1,8-Diazabicyclo[5.4.0]-7-undecen mittels einer Addition vom Michael-Typ an C-3 von2 gekoppelt und ergab dann nach Acetylierung am anomeren Zentrum eine anomere Mischung von 1,5-Di-O-acetyl-3-(1,2,4-triazol-1-yl)-2,3,6-trideoxy-L-arabino-hexofuranose (3). Die Reaktion von3 mit silyliertem 2,4-Di-hydroxypyrimidinen4 in Gegenwart von Trimethylsilyltriflat in absolutem Ethanol ergab die entsprechenden Nucleoside7 und8.

     

Diastereomeric Oxathia[n](1,1′)ferrocenophanes

Zusammenfassung Neue Oxathiaferrocenophane wurden durch Umsetzung von 1,1-Bis(hydroxymethyl)ferrocen mit Dithiolen dargestellt, welche Sauerstoff in den Alkylketten enthalten. Die Reaktion von 1,1-Bis(-hydroxyethyl)ferrocenen mit Dithiolen führte zu Mischungen von Diastereomeren, aus welchen reine Stereoisomere isoliert und charakterisiert wurden. Einige Aspekte des stereochemischen Verlaufes dieser Reaktionen werden diskutiert.

---

Diastereomere oxathia[n](1,1)ferrocenophane

Novel oxathiaferrocenophanes have been synthesized by the reaction of 1,1-bis(hydroxymethyl)ferrocene with dithiols bearing oxygen in chains. The reactions of 1,1-bis(-hydroxyethyl)ferrocenes with dithiols afforded mixtures of diastereomeric products from which pure stereoisomers were isolated and characterized. Some aspects concerning a stereochemical course of the reactions described are discussed.

     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS–XVI. ISPERSE BLUE 35

The photochemistry (Type I and II) of the phototoxic textile dye Disperse Blue (DB-35) and its purified components has been studied using electron spin resonance in conjunction with spin trapping technique and the direct detection of singlet oxygen (1O2) luminescence. The main components of DB-35 (which is synthesized by the successive nitration, reduction and methylation of 1,8-dihydroxy-anthraquinone) were separated by HPLC and identified by mass spectrometry and 2-D NMR as 4,5-diamino-1,8-dihydroxyanthraquinone (4,5-DDHAQ; 62% of total dye) and 2,7-diamino-1,8-dihydroxyanthraquinone (2,7-DDHAQ; 31% of total dye). Minor components included 2,5-diamino-1,8-dihydroxyanthraquinone (2,5-DDHAQ) and a monomethylated derivative of either 4,5-DDHAQ or 2,7-DDHAQ. Irradiation (624 nm) of 4,5-DDHAQ and 2,7-DDHAQ in dimethylsulfoxide resulted in the generation of superoxide which was trapped by 5,5-dimethyl-1-pyrroline-N-oxide (DMPO). Visible light irradiation of the components in ethanol generated 1O2 with the yields decreasing in the following order: 4,5-DDHAQ greater than 2,5-DDHAQ greater than 2,7-DDHAQ. These findings indicate that upon irradiation by visible light DB-35 can generate active oxygen species which may be responsible for the photocontact dermatitis caused by this dye.     

Spectroscopic and thermodynamic characterization of the E151D and E151A altered leucine aminopeptidases from Aeromonas proteolytica

Previous kinetic characterization of the glutamate 151 (E151)-substituted forms of the leucine aminopeptidase from Aeromonas proteolytica (Vibrio proteolyticus; AAP) has provided critical evidence that this residue functions as the general acid/base. The close proximity of similar glutamate residues to the bridging water/hydroxide of the dinuclear active sites of metalloenzymes (2.80 and 3.94 angstroms in carboxypeptidase G2 and 3.30 and 3.63 angstroms in AAP), suggests it may also be involved in stabilizing the active-site metal ions. Therefore, the structural perturbations of the dinuclear active site of AAP were examined for two E151-substituted forms, namely E151D-AAP and E151A-AAP, by UV-vis and electron paramagnetic resonance (EPR) spectroscopy. UV-vis spectroscopy of Co(II)-substituted E151A-AAP did not reveal any significant changes in the electronic absorption spectra. However UV-vis spectra of mono- and dicobalt(II) E151D-AAP exhibited a lower molecular absorptivity compared to AAP (23 and 43 M(-1) cm(-1) vs. 56 and 109 M(-1) cm(-1) for E151D-AAP and AAP, respectively) suggesting both Co(II) ions reside in distorted octahedral coordination geometry in E151D-AAP. EPR spectra of [Co_(E151D-AAP)], [ZnCo(E151D-AAP)], and [(CoCo(E151D-AAP)] were identical, with g(perpendicular) = 2.35, g(parallel) = 2.19, and E/D = 0.19, similar to [CoCo(AAP)]. On the other hand, the EPR spectrum of [Co_(E151A-AAP)] was best simulated assuming the presence of two species with (i) g(x,y) = 2.509, g(z) = 2.19, E/D = 0.19, A = 0.0069 cm(-1) and (ii) g(x,y) = 2.565, g(z) = 2.19, E/D = 0.20, A = 0.0082 cm(-1) indicative of a five- or six-coordinate species. Isothermal titration calorimetry experiments revealed a large decrease in Zn(II) affinities, with K(d) values elevated by factors of approximately 850 and approximately 24,000 for the first metal binding events of E151D- and E151A-AAP, respectively. The combination of these data indicates that E151 serves to stabilize the dinuclear active site of AAP.     

Structure and thermodynamic aspects of macrobicyclic polyether-metal ion interactions

The crystals structure of a K⁺-diptychand-15C5-18C6 iodide complex has been determined from X-ray data. The complexed bicyclic molecule crystallizes in the triclinic space group witha = 9.995(4) Å,b = 10.097(4) Å,c = 13.725(6) Å, = 90.12(3)°, = 93.62(4)°, = 97.56(3)°. The structure was solved using heavy atom methods and refined toR = 0.032 for 3262 independent reflections. In the crystal structure, the K⁺ lies between the two crown ether rings, and is coordinated by the nine donor atoms of the ligand molecule. The complexation properties of the ligand with K⁺ and Na⁺ were studied by titration calorimetry in 90% (v/v) MeOH/H₂O solution. The studies indicate the formation of 1 : 1 ligand : metal ion complexes in both solid state and solution.This paper is dedicated to the memory of the late Dr C. J. Pedersen.