Desorption of chloroorganic compounds from a bed of activated carbon

The desorption of 1,2-dichloroethane from a bed of DTO activated carbon after adsorption from aqueous solution has been investigated. The desorption process was carried out using steam. The basic characteristics of the process were determined. The studies were performed in the temperature range 100-160 degrees C. A steam consumption indicator reduces with an increase of temperature from 100 to 140 degrees C. An elevation of temperature above 140 degrees C does not cause an improvement in the desorption efficiency. The number of performed cycles does not reduce the adsorption capacity of used activated carbon. Studies on the regeneration of the bed saturated with a seven-component mixture of chloroorganic compounds at temperature of 140 degrees C were carried out. The degree of removal of the sum of chloro-derivatives exceeded 0.96 at a volume ratio of steam (recalculated on the condensate) to bed of about 10. It was found that the dechlorination proceeds during desorption at elevated temperature. The quantitative ratio of chloro-derivatives in the desorbate was changed in comparison to the composition of wastewater directed to the adsorption.     

Analysis of First-Order Reactions with Distributed Parameters

Simple methods of analysis of first-order kinetic processes controlled by distributions of parameters (activation energies and/or frequency factors) are presented. Both the isothermal and nonisothermal regimes are considered. The procedures make use of numerically calculated time derivatives of the concentrations of decaying species (reactants in the case of chemical reactions). They do not require any adjustable initial or boundary values of parameters (like concentration at the infinite time) being thus more accurate and reliable than earlier methods in which kinetic parameters were determined from the concentration, and not from its time derivative. The methods were successfully employed in analysis of the thermally driven cis–trans isomerization of a photochromic crown ether containing the azobenzene moiety incorporated in the crown.     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

Comparison of calorimetry and neutron scattering results concerning phase transitions in /Ni(NH3)6/(NO3)2 with the raman band profile study

Previously obtained calorimetry results revealed an existance of three solid phases in /Ni(NH₃)₆/(NO₃)₂. Neutron quasielastic scattering results, also obtained previously, gave evidence of quick reorientations of NH₃ groups around NiN axes in phases I and II. In the Raman profile study now reported we show that the NO^?₃ groups reorient quickly in phase I, whereas they are fixed in phase II. Connection of NH₃ and NO^?₃ reorientations with entropy of I?II transition is discussed.     

Calorimetric studies of refractory corundum

Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fluorescence lifetimes and spectral properties of protochlorophyllide in organic solvents in relation to the respective parameters in vivo

In this work, absorption and fluorescence spectra of protochlorophyllide (Pchlide), as well as its fluorescence lifetime, were investigated in organic solvents having different physical properties. The obtained Pchlide spectral features are discussed in relation to the parameters describing solvent properties (refractive index and dielectric constant) and taking into account the specific solvent-Pchlide interaction. The correlation of Pchlide Qy and Soret absorption bands with solvent polarizability function ((n2 - 1)/(n2 + 2)) has been found; however, the dispersion of the observed points was rather high. A small Stokes shift of a magnitude between 50 and 300 cm(-1) was found, which indicates low sensitivity of Pchlide to nonspecific solvation. The fluorescence decay of Pchlide was single exponential in all the investigated solvents, with the lifetime value ranging from 5.2 ns for dioxane to 3.5 ns for methanol. Dependence of the obtained fluorescence lifetimes on the solvent orientation polarizability, a parameter being the function of both refractive index and dielectric constant, was discussed. In water-methanol mixtures, a further decrease of the fluorescence lifetime was observed, giving values of 2.9 ns for 25% methanol. Double-exponential decay of Pchlide fluorescence was found for Pchlide in a solution of 15% methanol with the lifetimes of 4.5 +/- 0.5 ns and 1.2 +/- 0.3 ns and in pure water with the lifetimes of 2.5 +/- 0.5 ns and 0.4 +/- 0.1 ns. The obtained results are discussed in relation to spectroscopic properties of Pchlide in vivo.     

Synthesis of mesoporous carbons using ordered and disordered mesoporous silica templates and polyacrylonitrile as carbon precursor

Mesoporous carbons were synthesized from polyacrylonitrile (PAN) using ordered and disordered mesoporous silica templates and were characterized using transmission electron microscopy (TEM), powder X-ray diffraction, nitrogen adsorption, and thermogravimetry. The pores of the silica templates were infiltrated with carbon precursor (PAN) via polymerization of acrylonitrile from initiation sites chemically bonded to the silica surface. This polymerization method is expected to allow for a uniform filling of the template with PAN and to minimize the introduction of nontemplated PAN, thus mitigating the formation of nontemplated carbon. PAN was stabilized by heating to 573 K under air and carbonized under N2 at 1073 K. The resulting carbons exhibited high total pore volumes (1.5-1.8 cm3 g(-1)), with a primary contribution of the mesopore volume and with relatively low microporosity. The carbons synthesized using mesoporous templates with a 2-dimensional hexagonal structure (SBA-15 silica) and a face-centered cubic structure (FDU-1 silica) exhibited narrow pore size distributions (PSDs), whereas the carbon synthesized using disordered silica gel template had broader PSD. TEM showed that the SBA-15-templated carbon was composed of arrays of long, straight, or curved nanorods aligned in 2-D hexagonal arrays. The carbon replica of FDU-1 silica appeared to be composed of ordered arrays of spheres. XRD provided evidence of some degree of ordering of graphene sheets in the carbon frameworks. Elemental analysis showed that the carbons contain an appreciable amount of nitrogen. The use of our novel infiltration method and PAN as a carbon precursor allowed us to obtain ordered mesoporous carbons (OMCs) with (i) very high mesopore volume, (ii) low microporosity, (iii) low secondary mesoporosity, (iv) large pore diameter (8-12 nm), and (v) semi-graphitic framework, which represent a desirable combination of features that has not been realized before for OMCs.     

Reactions of theortho-metallated rhodium(I) complex of the formula Rh[P(OC6H4)(OPh)2][P(OPh)3]3 with HX molecules

Summary Theortho-metallated complex [RhP₃Pt] [P=P(OPh)₃, P=P(OC₆H₄)(OPh)₂] was obtained in the reaction of [RhP₄]ClO₄ with KOH. It reacts easily with proton donors HX (X=ClO₄, F, Cl, SCN, or acetylacetonate) to produce complexes [RhP₃X] when X is a strong donor. If X is a weaker donor (X=ClO₄ or F), pentacoordinate compounds of the type [PhP₄X] are formed. [RhP₃P] reacts with acetylacetone (Hacac) to produce [Rh(acac)P₂].     

Cationic polymerization of 1,4,6-trioxaspiro [4,4]-nonane

Cationic polymerization of 1,4,6-trioxaspiro [4,4]-nonane ( 1 ) with (CH₃)₃O⁺SbF₆^?(2) and CH₃OSO₂CF₃(3) initiators has been investigated. Although the observed rates of initiation and propagation are relatively slow, they consist of rapid reversible elementary reactions. In ¹H-NMR spectra, a broadening of the monomer signal was observed, indicating a fast exchange between “free” monomer and monomer engaged in the active species. The variety of orthoester bonds were observed in the polymer formed at the early stages of monomer conversion. The final polymer has, however, structure of a linear poly(ester–ether) including two subsequent ester or ether linkages. To account for these new facts, the mechanism of polymerization was proposed, consisting of a rapid reversible opening of one of the rings in the monomer molecule involved in the growing species, followed by the slower opening of the second ring with formation of the ester linkages. It appears that the rings originally present in the chains rearrange into the linear units intramolecularly.     

Finitely convergent deterministic and stochastic iterative methods for solving convex feasibility problems

We propose finitely convergent methods for solving convex feasibility problems defined over a possibly infinite pool of constraints. Following other works in this area, we assume that the interior of the solution set is nonempty and that certain overrelaxation parameters form a divergent series. We combine our methods with a very general class of deterministic control sequences where, roughly speaking, we require that sooner or later we encounter a violated constraint if one exists. This requirement is satisfied, in particular, by the cyclic, repetitive and remotest set controls. Moreover, it is almost surely satisfied for random controls.