An efficient 1,3-dipolar cycloaddition between aromatic selenoaldehydes and nitrile oxides or nitrile imines: an easy access to selenium-containing five-membered heterocyclic ring system

1,3-Dipolar cycloaddition between aromatic selenoaldehydes, generated by thermal retro Diels-Alder reaction of anthracene cycloadducts, and nitrile oxides or nitrile imines proceeded efficiently to give the corresponding [3+2] cycloadducts as a single isomer in good yields, being 1,4,2-oxaselenazoles or 1,3,4-selenadiazoles, respectively.     

Attenuation correction of SPECT imaging by dual energy method--quantification of 111In-labeled monoclonal anti-tumor antibody localization

Application of radiolabeled monoclonal anti-tumor antibodies for diagnosis and therapy has made remarkable progress in the past few years. Quantification of radiopharmaceutical localization is required adequate attenuation correction in SPECT imaging. Attenuation correction by transmission CT (TCT) data is one of the best method at present time. However, if a patient is moved between TCT and SPECT, this method is no more applicable. We developed a new attenuation correction algorithm by dual energy method, using 99mTc and 111In because of similarity of these linear attenuation coefficients. The new algorithm uses data of TCT with an external source of 99mTc, and requires another data from SPECT of 111In labeled monoclonal anti-tumor antibody, which are simultaneously obtained. TCT results in an attenuation map, which then serves as input into the final intrinsic correction algorithm to uncorrected SPECT data. In chest phantom experiment, the attenuation corrected SPECT images revealed nearly same distribution of actual radioactivity of 111In as compared to that of uncorrected one.     

High-pressure synthesis of cyclic phenylacetylene oligomer

New conjugated oligomers were prepared by reacting phenylacetylene under high pressure of 0.11 to 0.92 GPa at 100–200°C for 0–5 h. The number-average molecular weight M?_n, the weight-average molecular weight M?_w, and the oligomer yield increased with pressure, tem-perature, and time. The average molecular weight of the oligomer showed the maximum value (M?_n: 830, M?_w: 2400) under 0.92 GPa, the maximum pressure, where phenylacetylene was oligomerized at a constant temperature. The structure of the oligomer was investigated from ESR, infrared, UV–VIS, field desorption mass (FDMS) spectra, and ¹³C NMR spec-trum. Analysis of the FDMS spectrum revealed that the molecular weight of the oligomer was multiple of the monomer. ¹³C NMR spectrum of the oligomer showed the absence of sp-carbon (? C?). We found that the oligomer had a cyclic structure. The cyclic oligomers of pentamer or more were new compounds. © 1995 John Wiley & Sons, Inc.     

Production of highly specific anti-testosterone antiserum by an immunotolerance method

Anti-testosterone antisera were produced by pretreatment of rabbits with 15 alpha-carboxymethyl-5 alpha-dihydrotestosterone linked to a copolymer of D-glutamic acid and D-lysine (D-GL) before immunization with the bovine serum albumin conjugate of 15 alpha- and 15 beta-carboxymethyltestosterone. The specificity for 5 alpha-dihydrotestosterone of the antitestosterone antisera was considerably improved.     

Discrete palladium clusters that consist of two mutually bisecting perpendicular planes

The construction of novel molecules with unprecedented alignments of the constituent elements has revolutionized the field of functional materials. The arrangement of two or more planar subunits in a mutually perpendicular fashion is a frequently encountered approach to produce novel functional materials. Previous examples of such materials can be categorized into two well-investigated families: spiro-conjugated and dumbbell-shaped structures, wherein the two planes are aligned orthogonally via a single atom or an axis, respectively. This article describes a third family: reaction of [Pd(CN^tBu)₂]₃ with Sn₃Me₈ or Ge₆Me₁₂ afforded a Pd₇Sn₄ cluster and a Pd₈Ge₆ cluster that consist of two mutually bisecting perpendicular planes. In the Pd₇Sn₄ cluster, the two equivalent Pd₅Sn₂ planes share three palladium atoms that include a dihedral angle of 85.6°.

The construction of Pd₇Sn₄ and Pd₈Ge₆ clusters that consist of two mutually bisecting perpendicular planes was accomplished by the reaction of [Pd(CN^tBu)₂]₃ with Me₃Sn–SnMe₂–SnMe₃ or Ge₆Me₁₂.     

Preparation of dibromopyridines having -(CH2)m-SO3Na groups as monomers for new polypyridines

Dibromopyridines or dibromopyridone with -(CH₂)_m-SO₃Na group(s) has been prepared via the reactions of the corresponding dibromopyridines with -OH and -NH₂ groups with sultone. These compounds were converted into polymers with the -(CH₂)_m-SO₃H groups via organometallic polycondensation. The polymer showed proton conducting properties and high stability toward oxidation.     

Influence of Sn on the hydration of tricalcium aluminate, Ca3Al2O6

Tricalcium aluminate (Ca₃Al₂O₆, C₃A) containing 0?C5% of Sn was synthesized by solid-state method, and the products were characterized by XRD technique. Differential thermo-analytical technique (DTA) along with X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) were applied to study the hydration behaviour of different C₃A samples with and without the presence of gypsum. Results indicate that C₃A can accommodate small amount of Sn in its structure and remaining amount forms SnO₂. Hydration studies of the synthesized C₃A shows that the additions of 0.5 and 1% Sn increase and 2% Sn decrease the reactivity of C₃A at the initial period (<3?h) of hydration. Increasing additions of Sn also increase the amounts of amorphous phases and hexagonal calcium aluminate hydrates in the cement pastes. The stabilities of these hydration products also increase with increasing content of Sn in C₃A at the experimental conditions. The presence of Sn significantly changes the hydration of C₃A and gypsum solid mixture at the initial period of hydration by enhancing the formation of more amounts of AFt and AFm phases. However, at the later stage of hydration (on or after 3?days), the hydration products in C₃A and gypsum pastes with and without the presence of Sn are almost similar.     

Effect of Amines on the Selective Bromination of Some β-Substituted-2-Butenoic Esters

The effect of amines on the selective bromination of some β-substituted-2-butenoic esters is described. The bromination of methyl (Z)-4-t-butyldiphenylsilyloxy-3-methylbutenoate 2 in the presence of DIPEA (N, N-diisopropylethylamine) and the successive treatment of the obtained dibromide with potassium t-butoxide afford the desired Z bromide selectively. But the corresponding E bromide forms exclusively when 2, 6-di-t-butyl-4-methylpyridine is used in the bromination.     

Identification of Site-Specific Degradation in Bacterially Expressed Human Fibroblast Growth Factor 4 and Generation of an Aminoterminally Truncated,Stable Form

Fibroblast growth factor 4 (FGF4) is considered as a crucial gene for tumorigenesis in humans and the development of mammalian embryos. The secreted, mature form of human FGF4 is thought to be comprised of 175 amino acid residues (proline³² to leucine²⁰⁶, Pro³²-Leu²⁰⁶). Here, we found that bacterially expressed, 6× histidine (His)-tagged human FGF4 (Pro³²-Leu²⁰⁶) protein, referred to as HishFGF4, was unstable such as in phosphate-buffered saline. In these conditions, site-specific cleavage, including between Ser⁵⁴ and Leu⁵⁵, in HishFGF4 was identified. In order to generate stable human FGF4 derivatives, a 6× His-tagged human FGF4 (Leu⁵⁵-Leu²⁰⁶), termed HishFGF4L, was expressed in Escherichia coli. HishFGF4L could be purified from the supernatant of cell lysates by heparin column chromatography. In phosphate-buffered saline, HishFGF4L was considered as sufficiently stable. HishFGF4L exerted significant mitogenic activities in mouse embryonic fibroblast Balb/c 3T3 cells. In the presence of PD173074, an FGF receptor inhibitor, the growth-stimulating activity of HishFGF4L disappeared. Taken together, we suggest that HishFGF4L is capable of promoting cell growth via an authentic FGF signaling pathway. Our study provides a simple method for the production of a bioactive human FGF4 derivative in E. coli.