Degradation of a polyester‐urethane coating: Physical properties

In this article we studied the evolution of thermomechanical properties of a polyester‐urethane coating during degradation under different degradation conditions, i.e., aerobic and anaerobic conditions with and without dry/wet cycling during degradation. Dynamic mechanical and thermal analyses show that under aerobic conditions the coatings become stiffer and more brittle in the glassy state. This stiffening is probably due to the increase in the amount of hydrogen bonding and the formation of oxidized groups which increase the polarity of the material and enhance the interactions of the polymer segments. However, oxidation reactions result in a considerable decrease in cross‐link density and stiffness in the rubbery state. Both changes, in the glassy and rubbery states, give rise to development of internal stresses. These stresses increase as the degradation process proceeds. Nevertheless, for samples exposed to anaerobic conditions, the stiffness remains constant in the glassy state and the cross‐link density slightly increases as a result of degradation. This reconfirms the dominance of the effect of oxidation reactions on the mechanical failure of the coatings. Oxygen permeation measurements show a more‐or‐less time‐independent diffusion coefficient and a gradual decrease in solubility of oxygen as a function of exposure time. This results in a slight decrease in oxygen permeation (mainly in the early stage of the degradation) as degradation proceeds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 659–671     

Compact fibre-laser-pumped Ho:YLF oscillator–amplifier system

We developed a compact Ho:YLF oscillator–amplifier system in a novel setup to utilise the unpolarised pump power from a fibre laser efficiently, and produced 21.3 mJ at 1 kHz, with an M ² better than 1.1. The amplified energies agreed well with the predicted values from a two dimensional rotational symmetric amplifier model that we developed. The model considers upconversion losses and ground-state depletion, as well as the spatial distribution of the pump beam.     

Spatially resolved (semi)quantitative determination of iron (Fe) in plants by means of synchrotron micro X-ray fluorescence

Iron (Fe) is an essential element for plant growth and development; hence determining Fe distribution and concentration inside plant organs at the microscopic level is of great relevance to better understand its metabolism and bioavailability through the food chain. Among the available microanalytical techniques, synchrotron μ-XRF methods can provide a powerful and versatile array of analytical tools to study Fe distribution within plant samples. In the last years, the implementation of new algorithms and detection technologies has opened the way to more accurate (semi)quantitative analyses of complex matrices like plant materials. In this paper, for the first time the distribution of Fe within tomato roots has been imaged and quantified by means of confocal μ-XRF and exploiting a recently developed fundamental parameter-based algorithm. With this approach, Fe concentrations ranging from few hundreds of ppb to several hundreds of ppm can be determined at the microscopic level without cutting sections. Furthermore, Fe (semi)quantitative distribution maps were obtained for the first time by using two opposing detectors to collect simultaneously the XRF radiation emerging from both sides of an intact cucumber leaf.

Heptametallic,Octupolar Nonlinear Optical Chromophores with Six Ferrocenyl Substituents

New complexes with six ferrocenyl (Fc) groups connected to Zn^II or Cd^II tris(2,2′‐bipyridyl) cores are described. A thorough characterisation of their BPh₄^? salts includes two single‐crystal X‐ray structures, highly unusual for such species with multiple, extended substituents. Intense, visible d(Fe^II)→π* metal‐to‐ligand charge‐transfer (MLCT) bands accompany the π→π* intraligand charge‐transfer absorptions in the near UV region. Each complex shows a single, fully reversible Fe^III/II wave when probed electrochemically. Molecular quadratic nonlinear optical (NLO) responses are determined by using hyper‐Rayleigh scattering and Stark spectroscopy. The latter gives static first hyperpolarisabilities β₀ reaching as high as approximately 10^?27 esu and generally increasing with π‐conjugation extension. Z‐scan cubic NLO measurements reveal high two‐photon absorption cross‐sections σ₂ of up to 5400 GM in one case. DFT calculations reproduce the π‐conjugation dependence of β₀, and TD‐DFT predicts three transitions close in energy contributing to the MLCT bands. The lowest energy transition has octupolar character, whereas the other two are degenerate and dipolar in nature.     

Polysaccharide‐Based Oleogels Prepared with an Emulsion‐Templated Approach

The preparation and characterization of oleogels structured by using a combination of a surface‐active and a non‐surface‐active polysaccharide through an emulsion‐templated approach is reported. Specifically, the oleogels were prepared by first formulating a concentrated oil‐in‐water emulsion, stabilized with a combination of cellulose derivatives and xanthan gum, followed by the selective evaporation of the continuous water phase to drive the network formation, resulting in an oleogel with a unique microstructure and interesting rheological properties, including a high gel strength, G′>4000 Pa, shear sensitivity, good thixotropic recovery, and good thermostability.     

Molecular Fluorescence Imaging Spectroscopy for Mapping Low Concentrations of Red Lake Pigments: Van Gogh's Painting The Olive Orchard

Vincent van Gogh used fugitive red lake pigments that have faded in some paintings. Mapping their distribution is key to understanding how his paintings have changed with time. While red lake pigments can be identified from microsamples, in situ identification and mapping remain challenging. This paper explores the ability of molecular fluorescence imaging spectroscopy to identify and, more importantly, map residual non‐degraded red lakes. The high sensitivity of this method enabled identification of the emission spectra of eosin (tetrabromine fluorescein) lake mixed with lead or zinc white at lower concentrations than elemental X‐ray fluorescence (XRF) spectroscopy used on account of bromine. The molecular fluorescence mapping of residual eosin and two carmine red lakes in van Gogh's The Olive Orchard is demonstrated and compared with XRF imaging spectroscopy. The red lakes are consistent with the composition of paint tubes known to have been used by van Gogh.     

Impact of Collection Volume and DNA Extraction Method on the Detection of Biomarkers and HPV DNA in First-Void Urine

The potential of first-void (FV) urine as a non-invasive liquid biopsy for detection of human papillomavirus (HPV) DNA and other biomarkers has been increasingly recognized over the past decade. In this study, we investigated whether the volume of this initial urine stream has an impact on the analytical performance of biomarkers. In parallel, we evaluated different DNA extraction protocols and introduced an internal control in the urine preservative. Twenty-five women, diagnosed with high-risk HPV, provided three home-collected FV urine samples using three FV urine collection devices (Colli-Pee) with collector tubes that differ in volume (4, 10, 20 mL). Each collector tube was prefilled with Urine Conservation Medium spiked with phocine herpesvirus 1 (PhHV-1) DNA as internal control. Five different DNA extraction protocols were compared, followed by PCR for GAPDH and PhHV-1 (qPCR), HPV DNA, and HBB (HPV-Risk Assay), and ACTB (methylation-specific qPCR). Results showed limited effects of collection volume on human and HPV DNA endpoints. In contrast, significant variations in yield for human endpoints were observed for different DNA extraction methods (p < 0.05). Additionally, the potential of PhHV-1 as internal control to monitor FV urine collection, storage, and processing was demonstrated.     

Oxidative 10-membered ring expansion and contraction of stereoisomeric 1(10)-unsaturated and 1,10-epoxy-5-oxo-5,10-secosteroids induced by peracids

The present study is concerned with the oxidative behaviour of unsaturated and epoxy 5-oxo-5,10-secosteroids in the presence of m-CPBA or TFAA-UHP as oxidants in order to investigate potential parameters controlling the chemoselectivity and regioselectivity. In the study we discovered a striking difference in the chemical behaviour of stereoisomeric compounds, (Z)- and (E)-3β-acetoxy-5,10-secocholest-1(10)-en-5-ones, as well as 1S,10R- and 1R,10R-epoxides. The secoketones were oxidized with exclusively C-6 migration and Baeyer–Villiger rearrangement product formation, whereas their stereoisomers provided the ring-contracted products, without lactone formation. The preferred conformation of expanded and contracted rings was established by NOESY correlations. The structures of two obtained lactones were also confirmed by X-ray analysis. The mechanistic and stereochemical aspects of these transformations are discussed.     

A Theorem Concerning Nets Arising from Generalized Quadrangles with a Regular Point

Suppose is a generalized quadrangle (GQ) of order , with a regular point. Then there is a net which arises from this regular point. We prove that if such a net has a proper subnet with the same degree as the net, then it must be an affine plane of order t. Also, this affine plane induces a proper subquadrangle of order t containing the regular point, and we necessarily have that . This result has many applications, of which we give one example. Suppose is an elation generalized quadrangle (EGQ) of order , with elation point p. Then is called a skew translation generalized quadrangle (STGQ) with base-point p if there is a full group of symmetries about p of order t which is contained in the elation group. We show that a GQ of order s is an STGQ with base-point p if and only if p is an elation point which is regular.     

The embedding of (0, α)-geometries in PG(n, q): part II

In Part I we obtained results about the embedding of (0, α)-geometries in PG(3, q). Here we determine all (0, α)-geometries with q+1 points on a line, which are embedded in PG(n, q), n>3 and q>2. As a particular case all semi partial geometries with parameters s=q,t,α(>1),μ, which are embeddable in PG(n, q), q≠2, are obtained. We also prove some theorems about the embedding of (0, 2)-geometries in PG(n, 2): we show that without loss of generality we may restrict ourselves to reduced (0, 2)-geometries, we determine all (0, 2)-geometries in PG(4, 2), and we describe an unusual embedding of U_2,3(9) in PG(5, 2).