Destabilized carbenium ions: Secondary and tertiary α-carbomethoxybenzyl cations

The secondary α-carbomethoxybenzyl cations a and the tertiary α-carbomethoxybenzyl cations d have been generated by electron impact-induced fragmentation from appropriately α-substituted methyl phenylacetate and 2-phenylpropionates 1–4. The ions a and d are further examples of destabilized carbenium ions with a push–pull substitution at the carbenium ion centre. The characteristic reaction of these ions is a rearrangement by a 1,2-shift of the methoxy group concomitant to the elimination of CO. This rearrangement reaction is associated with a very large and non-statistical kinetic energy release (a : T ₅₀ = 570 meV; d : T ₅₀ = 760 meV), which is attributed to tight transition states along the reaction coordinates corresponding to the three-membered cyclic oxonium ions b and h, respectively. The tertiary ion d can be distinguished from its more stable isomers f and g by the mass-analysed ion kinetic energy and collisional activation spectra. The investigation of specifically deuterated analogues of ions d and g reveals an isomerization of d to g via a species protonated at the phenyl group but no equilibration between d and g. This isomerization exhibits a large isotope effect for the hydrogen transfer, indicating similar energy barriers for the isomerization and for the CO elimination of d.     

Ultra-trace analysis of U,Th, Ca and selected heavy metals in high purity refractory metals with isotope dilution mass spectrometry

A method for the determination of trace impurities (U, Th, Ca, Fe, Cr, Ni, Cu, and Cd) in the refractory metals molybdenum and tungsten with isotope dilution mass Spectrometry (IDMS) has been developed. This method enables determinations of uranium and thorium down to the lowest pg/g level with high precision and accuracy. Selective chromatographic, extractive and electrolytic methods for the trace-matrix separation were combined with positive thermal ionization mass spectrometry. Different samples of high purity (4N) and of ultra high purity (UHP) materials for advanced technologies were analysed. The detection limits reached are (in ng/g): U 0.006, Th 0.008, Ca 10, Fe 19, Cr 0.5, Ni 0.6, Cu 2.7, and Cd 0.12. A comparison of results with other sensitive analytical methods (ICP-MS, GDMS, SIMS) makes obvious the urgent necessity of a reliable calibration method like IDMS because the analytical results obtained by the other methods often spread over a wide range.     

Sedimentation of dissolved macromolecules in the vicinity of the consolute point 1. Strictly binary systems and kinetic considerations

This paper analyzes the effect of gravity on polymer solutions near the consolute point. Calculations are carried out for monodisperse polystyrene in cyclohexane using the Flory-Huggins expression with a concentration-dependent interaction parameter for the free energy of mixing. Depending on molecular weight and distance to the demixing temperature, the influence of gravity leads to non-negligible gradients of the volume fraction in the one-phase region as well as in the two-phase region. In particular, the effect of gravity on the measurement of the coexistence curve in a finite sample is calculated explicitly.In contrast to theory, experiments show that the concentration remains constant throughout the sample over a period of days as long as the system is kept in the homogenous region. Pronounced concentration gradients, however, are established in the twophase region within approximately one day. These findings are discussed with respect to sedimentation kinetics in terms of the droplet model of critical fluids.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Neue Oxoterbate(IV) mit Lithium Rb2Li14[Tb3O14] und Li6Tb2O7

New Oxoterbates(IV) with Lithium: On Rb₂Li₁₄[Tb₃O₁₄] and Li₆Tb₂O₇ For the first time we prepared Rb₂Li₁₄[Tb₃O₁₄] as yellow single crystals from Li₈TbO₆ and Rb₂O (Tb:Rb = 1:2) [Ag-cylinder, 500°C, 30 d, then Au-tube, 700°C, 27 d]. The structure refinement [652 I₀ (h kl), four circle diffractometer Philips PW 1100, ω-scan, MoKα, R = 4.69%, R_w = 3.24%, absorption considered, Immm with a = 1 283.07(10), b = 790.87(7), c = 736.87(7)pm, Z = 2, d_x = 4.30 g · cm^?3] confirms that it is isotypic with K₂Li₁₄[Pb₃O₁₄]. Furthermore we got for the first time Li₆Tb₂O₇ as a bright yellow compound from Li₂O₂ and “Tb₄O₇*” [(Li:Tb = 3.4:1), Au-ube, 750°C, 13 d (powder), 850°C 22 d (single crystals)] and by thermal decomposition of Rb₂Li₁₄[Tb₃O₁₄] (Au-tube, 850°C, 25 d). Powder and single crystal data [1 327 I₀ (h kl), four circle diffractometer PW 1100, ω-scan, AgKα, R = 9.38%, R_w = 5.23%, absorption not considered, P2₁/a, a = 1 056.30(10), b = 613.50(4), c = 546.56(5) pm, β = 109.668(7)°, Z = 2, d_x = 4.67 g · cm^?3 d_pyc = 4.53 g · cm^?3] reveal a new type of structure that may be deduced by the NaCl-type of structure. The Madelung Part of Lattice Energy, MAPLE, Effective Coordination Numbers, ECoN, these via Mean Fictive Ionic Radii, MEFIR, are calculated and discussed.     

Nucleophilic Addition of CH, NH, and OH Bonds to the Phosphadiazonium Cation and Interpretation of (31)P Chemical Shifts at Dicoordinate Phosphorus Centers

The phosphadiazonium cation [MesNP](+) reacts quantitatively with the fluorenylide anion, MesNH(2), and MesOH (Mes = 2,4,6-tri-tert-butylphenyl), resulting in formal insertion of the N-P moiety into the H-Y (Y = C, N, O) bonds. Specifically, reaction of MesNPCl with fluorenyllithium gives the aminofluorenylidenephosphine [crystal data: C(31)H(38)NP, monoclinic, P2(1)/c, a = 9.568(8) ?, b = 24.25(2) ?, c = 11.77(1) ?, beta = 101.38(8) degrees, Z = 4]. Similarly, reaction of [MesNP][GaCl(4)] with MesNH(2) gives the diaminophosphenium salt [MesN(H)PN(H)Mes][GaCl(4)] [crystal data: C(36)H(60)Cl(4)GaN(2)P, monoclinic, C2/c, a = 24.921(2) ?, b = 10.198(4) ?, c = 16.445(2) ?, beta = 93.32(1) degrees, Z = 4], and reaction with MesOH gives the first example of an aminooxyphosphenium salt [MesN(H)POMes][GaCl(4)]. It is proposed that the reactions involve nucleophilic attack at phosphorus followed by a 1,3-hydrogen migration from Y to N. Experimental evidence for the formation of sigma-complex intermediates is provided by the isolation of [MesNP-PPh(3)][SO(3)CF(3)] [crystal data: C(37)H(44)F(3)NO(3)P(2)S, triclinic, P&onemacr;, a = 10.663(1) ?, b = 19.439(1) ?, c = 10.502(1) ?, alpha = 103.100(7) degrees, beta = 113.311(7) degrees, gamma = 93.401(7) degrees, Z = 2]. As part of the unequivocal characterization of the aminooxyphosphenium salt, detailed solid-state (31)P NMR studies and GIAO calculations on the phosphenium cations have been performed. Contrary to popular belief, the phosphorus shielding in dicoordinate cations is not caused by the positive charge but results from efficient mixing between the phosphorus lone pair and pi orbitals.     

Neues über Oxouranate: Über α-Li6UO6. Mit einer Bemerkung über β-Li6UO6

New Investigations about Oxo Uranates: On α-Li₆UO₆. With a Remark about β-Li₆UO₆ The crystal structure of transparent, bright yellow single crystals of α-Li₆UO₆ has been determined. [a = 838.07(5), c = 738.34(7) pm; d_pyk = 4.02, d_x = 4.17 g · cm^?3; space group R3 ; Z = 3; R = 3.17%, R_w = 3.06%; 408 symmetry independent I₀(hkl); AgKα fourcircle diffractometer Philips PW 1100]. The structure is dominated by a threedimensional framwork of “hollow spaces”, built up by 12 O^2? (and 12 Li⁺). The Madelung Part of Lattice Energy, MAPLE, is calculated and discussed.     

Verhalten von ng- und μg-Mengen biochemisch interessierender Amine bei Trennverfahren,wie Ionenaustausch-Chromatographie,Mitfällung und Extraktion

The behaviour of ng- and μg-amounts of amines of biochemical interest is compared. ng-amounts are co-precipitated from aqueous solutions with the tetraphenyloborates of potassium, ammonium and creatinine. A separation from potassium chloride, ammonium chloride and creatinine is achieved by extraction of the amines with methanol. The elution volumes of about 50 amines during ion-exchange chromatography using a weakly acidic resin are compared. A procedure has been elaborated by which the amines can be collected from urine.     

Zur Darstellung von Oxiden cyclischer,sekundärer Arsine

Hydrolysis of 1-chloro-arsolane, C₄H₈AsCl, and 1-chloro-arsenane, C₅H₁₀AsCl, leads to oxides C₈H₁₀As₂O and C₁₀H₂₀As₂O, respectively. On direct alkylation of arsenic trioxide with 1.4-butane- and 1.5-pentane-bis-magnesium bromide these oxides are formed only in trifling amounts. Better results are gained by alkylation of N,N-dimethylaminodichloroarsane into amino-arsolane and amino-arsenane, which are also transformed into these oxides by hydrolysis. By hydrolysis of 1.4-dichloro-diarsenane only a small amount of 1.4-epoxo-arsenane is formed, whereas mainly a dimer of this oxide results. Solvolysis of 2.6-dichloro-diarsa-[3.3.0]-bicyclooctane with water, hydrogen sulphide or methylamine leads to 7-oxa-, 7-thia- and 7-methylaza-2.5-diarsa-noradamantane, respectively.