Novel Bottom‐Up SERS Substrates for Quantitative and Parallelized Analytics

Surface‐enhanced Raman spectroscopy (SERS) is an emerging technology in the field of analytics. Due to the high sensitivity in connection with specific Raman molecular fingerprint information SERS can be used in a variety of analytical, bioanalytical, and biosensing applications. However, for the SERS effect substrates with metal nanostructures are needed. The broad application of this technology is greatly hampered by the lack of reliable and reproducible substrates. Usually the activity of a given substrate has to be determined by time‐consuming experiments such as calibration or ultramicroscopic studies. To use SERS as a standard analytical tool, cheap and reproducible substrates are required, preferably with a characterization technique that does not interfere with the subsequent measurements. Herein we introduce an innovative approach to produce low‐cost and large‐scale reproducible substrates for SERS applications, which allows easy and economical production of micropatterned SERS active surfaces on a large scale. This approach is based on an enzyme‐induced growth of silver nanostructures. The special structural feature of the enzymatically deposited silver nanoparticles prevents the breakdown of SERS activity even at high particle densities (particle density >60 %) that lead to a conductive layer. In contrast to other approaches, this substrate exhibits a relationship between electrical conductivity and the resulting SERS activity of a given spot. This enables the prediction of the SERS activity of the nanostructure ensemble and therewith the controllable and reproducible production of SERS substrates of enzymatic silver nanoparticles on a large scale, utilizing a simple measurement of the electrical conductivity. Furthermore, through a correlation between the conductivity and the SERS activity of the substrates it is possible to quantify SERS measurements with these substrates.     

Fragmentation energetics of the phenol(+)···Ar(3) cation cluster

The various dissociation thresholds of phenol(+)···Ar(3) complexes for the consecutive loss of all three Ar ligands were measured in a molecular beam using resonant photoionization efficiency and mass analyzed threshold ionization spectroscopy via excitation of the first excited singlet state (S(1)). The adiabatic ionization energy is derived as 68077 ± 15 cm(-1). The analysis of the dissociation thresholds demonstrate that all three Ar ligands in the neutral phenol···Ar(3) tetramer are attached to the aromatic ring via π-bonding, denoted phenol···Ar(3)(3π). The value of the dissociation threshold for the loss of one Ar ligand from phenol(+)···Ar(3)(3π), ～190 cm(-1), is significantly lower than the binding energy measured for the π-bonded Ar ligand in the phenol(+)···Ar(π) dimer, D(0) = 535 ± 3 cm(-1). This difference is rationalized by an ionization-induced π → H isomerization process occurring prior to dissociation, that is, one Ar atom in phenol(+)···Ar(3)(3π) moves to the OH binding site, leading to a structure with one H-bonded and 2 π-bonded ligands, denoted phenol(+)···Ar(3)(H/2π). The dissociation thresholds for the loss of two and three Ar atoms are also reported as 860 and 1730 cm(-1). From these values, the binding energy of the H-bound Ar atom can be estimated as 870 cm(-1).     

Involvement of cyan and ester groups in surface interactions of aerosil–cyanophenyl alkyl benzoate systems with high silica density: Infrared investigations

Composites prepared from aerosil A380 and liquid crystals (LCs) of 4-n-alkyl-4′-cyanophenyl benzoate type, with four to six carbon atoms in the alkyl chain were investigated by infrared spectroscopy. Their high silica content (of 2–7 g aerosil/1 g of LC) was given by thermogravimetric investigations and allows the observation of a rather thin LC layer on the silica particles. Several surface species onto the external surface of the grains were demonstrated. Arguments are given that monomer and dimer species are present in the bulk cyanophenyl benzoate materials while bulk-like species along with hydrogen-bonded ones coexist in the so-called surface layer of the composites. The main interaction of LC molecules with the aerosil surface is by hydrogen bonding taking place with the involvement of the cyan group. There is a contribution of ester carbonyl group to these surface interactions but this cannot be well quantified.     

Pulse shape analysis to reduce the background of BEGe detectors

A simple technique for pulse shape discrimination in HPGe-detectors of the so-called BEGe type, based on just one parameter obtained from one signal read out, is presented here. This technique allows discriminating between pulses generated when the deposited energy is located within a small region of about 1 mm³ from the pulses generated when the energy is deposited at different locations several mm or cm apart. Two possible applications using this technique are: (i) experiments that look for neutrinoless double β decay in ⁷⁶Ge, such as GERDA; (ii) γ spectrometry measurements where the Compton continuum can be reduced and the efficiency for cascading γ-rays can remain high. With this active background reduction technique a Compton suppression factor of about 3 was obtained. The detector response may be influenced by the detector size. The detector used for this study had a diameter of 6 cm, a thickness of 2.6 cm and a relative efficiency of 19%. The results obtained with this detector were consistent with the results obtained by Budjá? et al. [J Instrum 4:10, 2009] with a 50% relative efficiency BEGe detector.     

Comment on “Validation of specificity in doping control: problems and prospects”

The paper contains a reply to ‘Validation of specificity in doping control: problems and prospects’ by N. M. Faber. Dr. Faber charges the work of anti-doping scientists of the use inappropriate methods. The allegations refer to the procedure of substance identification which according to Dr. Faber is based on subjective criteria (“visual inspection”). We demonstrate that by contrast it represents an objective, logically sound, and clearly defined procedure which strictly follows the logic of scientific reasoning.     

DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils

Suspensions of commercial refined beech pulp (RBP) were further processed through mechanical disintegration (MD-RBP), chemical modification (CM-RBP) and through chemical modification followed by mechanical disintegration (CM-MD-RBP). Nanocomposites were prepared by compounding a poly(vinyl acetate) (PVAc) latex adhesive with increasing contents of the different types of nanofibrils, and the resulting nanocomposites were analyzed by dynamic mechanical analysis (DMA). Also, the suitability of using the CM-RBP fibrils to formulate PVAc adhesives for wood bonded assemblies with improved heat resistance was studied. The presence of cellulose nanofibrils had a strong influence on the viscoelastic properties of PVAc latex films. For all nanocomposites, increasing amounts of cellulose nanofibrils (treated or untreated) led to increasing reinforcing effects in the glassy state, but especially in the PVAc and PVOH glass transitions. This reinforcement primarily resulted from interactions between the cellulose fibrils network and the hydrophilic PVOH matrix that led to the complete disappearance of the PVOH glass transition (tan δ peak) for some fibril types and contents. At any given concentration in the PVOH transition, the CM-MD-RBP nanofibrils provided the highest reinforcement, followed by the MD-RBP, CM-RBP and the untreated RBP. Finally, the use of the CM-RBP fibrils to prepare PVAc reinforced adhesives for wood bonding was promising since, even though they generally performed worse in dry and wet conditions, the boards showed superior heat resistance (EN 14257) and passed the test for durability class D1.     

Evaluation of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry for the diagnosis of inherited metabolic disorders using an automated data processing strategy

Organic acidurias are a large group of inherited metabolic disorders (IMDs), commonly diagnosed by GC-MS analysis of organic acids in urine after acidic extraction and trimethylsilylation. In this study, a GC×GC-ToF-MS method has been optimized for the analysis of pathological metabolites in urine. An automated data processing strategy based on the use of mass spectra and GC retention times for the target search and quantification of pathological metabolites has been developed. Using this procedure, each unknown sample is automatically examined for the presence of markers of several diseases at the same time. The method has been applied for the analysis of 6 challenging proficiency testing samples from patients with IMDs (thymidine phosphorylase deficiency, mevalonic aciduria, hawkinsinuria, aromatic l-amino acid decarboxylase deficiency, propionic acidemia and medium-chain acyl-CoA dehydrogenase deficiency). Using the GC×GC-ToF-MS method, we were able to determine complete sets of markers for all the IMDs. The quality of the mass spectral matches for the pathological markers was higher than 800 (out of 1000).     

Effect of alcohol consumption on whole-body protein turnover in healthy adults

The aim of the study was to investigate the whole-body protein turnover, either before or after continuous, moderate ethanol-induced oxidative stress by red wine consumption over a relatively short period in healthy volunteers. Ten healthy adults received an individual regular diet over 20 days. After 10 days, the subjects consumed 0.4 ml ethanol kg(-1) day(-1) as red wine together with dinner over a 10-day period. After 8 and 18 days, respectively, a (15)N-labelled yeast protein was administered in a dosage of 4.2 mg kg(-1) body weight. Urine and faeces were collected over 48 h, respectively. The (15)N-enrichment was measured by isotope ratio mass spectrometry, whereas the protein flux rates were calculated by a three-compartment model. The whole-body protein turnover without/with red wine consumption amounted to 3.73±0.6 and 3.49±0.6 g kg(-1) day(-1) (not significant), respectively. Moderate alcohol consumption does not induce significant short-term changes in the whole-body protein turnover of healthy adults.