The coordinative properties of the ligands Ph2ECH2EPh2 (E = P,As, Sb) in carbonylvanadium complexes,and the molecular structure of η5-C5H5V(CO)3As2Ph4

Photo-reaction between the ligands Ph₂ECH₂EPh₂ (E = P: dppm, E = As: dpam, E = Sb: dpsm), L, and the vanadium complexes η⁵-C₅H₅V(CO)₄ and [Et₄N][V(CO)₆] yields monosubstituted mononuclear (dpsm) and dinuclear, ligand-bridged complexes (dpam, dpsm). With dppm, the final products are disubstituted chelate complexes, but monosubstituted mono- and dinuclear species are formed as intermediates.The shielding of the ⁵¹V nucleus decreases in the series dpsm > dppm > dpam and {M(CO)_n} > {M(CO)_n?1} L > {M(CO)_n?1}₂μ-L > {M(CO)_n?2}dppm ({M(CO)_n}[V(CO)₆]^?, η⁵-C₅H₅V(CO)₄). The half-widths of the NMR signals are greater for dinuclear than for mononuclear complexes.The crystal and molecular structures of η⁵-C₅H₅V(CO)₃As₂Ph₄ have been determined. The compound crystallizes in the space group P2₁/c with a = 1347.8, b = 1020.0, c = 2085.2 pm and β = 82.3°. Due to steric crowding, the ⁵¹V shielding is low composed to that of {η⁵-C₅H₅V(CO)₃}₂μ-dpam.     

Nanotubes fabricated from Ni-naphthalocyanine by a template method

Novel naphthalocyanine (Nc) nanotubes with special wall structures were fabricated by a template method using Nc molecules as building blocks. Thermal stabilization of the ordered columnar structures of the tetrakis(tert-butyl)naphthalocyanine (Ni-BNc) molecules, induced from the pi-pi interactions in the nanoscale channels of an alumina template, resulted in Nc nanotubes with walls consisting of well-ordered Nc molecular disks. Further thermal treatment of Ni-BNc at 600 degrees C produced carbonized Nc nanotubes containing ordered columnar, graphitic wall structures with the graphene disks arranged perpendicular to the tube axis. These nanotubes may be useful for extending the application of Nc molecules for nanodevice fabrication.     

Formation of doubly positively charged diatomic ions of Mo2(2+) produced by Ar+ sputtering of an Mo metal surface

Long-lived metastable doubly positively charged diatomic ions of Mo2(2+) have been produced by Ar+ bombardment of a molybdenum metal surface. These exotic molecular dications, such as for example 92,95Mo2(2+) at m/z 93.5, could be observed in positive ion mass spectra for ion flight times of approximately 17 micros in a Cameca IMS-3f secondary ion mass spectrometer, when the ion extraction field was adjusted for detection of ions that are formed in the gas phase several micrometers in front of the sputtered surface. Mo2(2+) was observed at high primary current densities for projectile ions of Ar+, but could not be detected under very similar bombarding conditions for projectile ions of Xe+. Such a dependence of ion production by inert gas sputtering on the primary ion species [ionization energies: IP1(Ar) = 15.76 eV and IP1(Xe) = 12.13 eV] is unusual. It is shown that formation of Mo2(2+) dications takes place by resonant charge transfer in grazing gas-phase collisions between incoming projectile ions of Ar+ and sputtered molecular ions of Mo2+. The efficiency for such a resonant electron capture (Mo2+ + Ar+ --> Mo2(2+) + Ar) is of the order of 10(-5) for the bombarding conditions in our mass spectrometer and corresponds to a cross section of a few 10(-15) cm2.     

Two new groups of homoleptic rare earth pyridylbenzimidazolates: (NC12H8(NH)2)[Ln(N3C12H8)4] with Ln = Y,Tb, Yb,and [Ln(N3C12H8)2(N3C12H9)2][Ln(N3C12H8)4](N3C12H9)2 with Ln = La,Sm, Eu

The compounds (NC(12)H(8)(NH)(2))[Ln(N(3)C(12)H(8))(4)], Ln = Y, Tb, Yb, and [Ln(N(3)C(12)H(8))(2)(N(3)C(12)H(9))(2)][Ln(N(3)C(12)H(8))(4)](N(3)C(12)H(9))(2), with Ln = La, Sm, Eu, were obtained by reactions of the group 3 metals yttrium and lanthanum as well as the lanthanides europium, samarium, terbium, and ytterbium with 2-(2-pyridyl)-benzimidazole. The reactions were carried out in melts of the amine without any solvent and led to two new groups of homoleptic rare earth pyridylbenzimidazolates. The trivalent rare earth atoms have an eightfold nitrogen coordination of four chelating pyridylbenzimidazolates giving an ionic structure with either pyridylbenzimidazolium or [Ln(N(3)C(12)H(8))(2)(N(3)C(12)H(9))(2)](+) counterions. With Y, Eu, Sm, and Yb, single crystals were obtained whereas the La- and Tb-containing compounds were identified by powder methods. The products were investigated by X-ray single crystal or powder diffraction and MIR and far-IR spectroscopy, and with DTA/TG regarding their thermal behavior. They are another good proof of the value of solid-state reaction methods for the formation of homoleptic pnicogenides of the lanthanides. Despite their difference in the chemical formula, both types (NC(12)H(8)(NH)(2))[Ln(N(3)C(12)H(8))(4)], Ln = Y (1), Tb (2), Yb (3), and [Ln(N(3)C(12)H(8))(2)(N(3)C(12)H(9))(2)][Ln(N(3)C(12)H(8))(4)](N(3)C(12)H(9))(2), Ln = La (4), Sm (5), Eu (6), crystallize isotypic in the tetragonal space group I4(1). Crystal data for (1): T = 170(2) K, a = 1684.9(1) pm, c = 3735.0(3) pm, V = 10603.5(14) x 10(6) pm(3), R1 for F(o) > 4sigma(F(o)) = 0.053, wR2 = 0.113. Crystal data for (3): T = 170(2) K, a = 1683.03(7) pm, c = 3724.3(2) pm, V = 10549.4(14) x 10(6) pm(3), R1 for F(o) > 4sigma(F(o)) = 0.047, wR2 = 0.129. Crystal data for (5): T = 103(2) K, a = 1690.1(2) pm, c = 3759.5(4) pm, V = 10739(2) x 10(6) pm(3), R1 for F(o) > 4sigma(F(o)) = 0.050, wR2 = 0.117. Crystal data for (6): T = 170(2) K, a = 1685.89(9) pm, c = 3760.0(3) pm, V = 10686.9(11) x 10(6) pm(3), R1 for F(o) > 4sigma(F(o)) = 0.060, wR2 = 0.144.     

Preparation of high molecular weight polyurethane particles by nonaqueous emulsion polyaddition

A versatile nonaqueous emulsion polyaddition process for the one-step fabrication of spherical polyurethane nanoparticles is presented. Three different emulsion systems were used consisting of N,N′-dimethylformamide (DMF) dispersed in n-hexane, acetonitrile dispersed in cyclohexane, and acetonitrile dispersed in tetradecane. After successful stabilization of the emulsion systems by using a poly(isoprene)-poly(methylmethacrylate) block copolymer, the fabrication of the polyurethanes was carried out within the dispersed polar phase. The polyurethane particles showed average diameters as small as 35 nm. Additionally, infrared (IR) characterization revealed that the formation of any urea, which decreases the mechanical properties of the polyurethanes, was prevented during the polyaddition. This was attributed to the anhydrous reaction conditions. Gel permeation chromatography (GPC) analysis demonstrated the average molecular weights (M _n) of the polyurethanes to be as high as 16,500 g/mol, corresponding to conversions of 0.98. Comparable molecular weights and conversions have not previously been achieved without the formation of urea.     

Synthesis of well‐designed polymers carrying saccharide moieties via RAFT miniemulsion polymerization

Two hydrophobic vinyl saccharide monomers based on D ‐glucose and D ‐fructose were polymerized by employing the reversible addition‐fragmentation transfer (RAFT) miniemulsion polymerization technique to prepare well‐designed glycopolymers. Three dithiobenzoate‐RAFT agents [S?C(Ph)S? R], 1‐phenylethyl dithiobenzoate (PED), 2‐phenylprop‐2‐yl dithiobenzoate (PPD), and 2‐cyanoprop‐2‐yl dithiobenzoate (CPD), were used to control the growth of polymer chains. The best results were obtained in the presence of the PPD‐RAFT agent and the formed polymers have polydispersity index's (PDI) lower than 1.15. Under adequate miniemulsion polymerization conditions, a glycopolymer with PDI of 1.1 and molecular weight of 5 × 10⁴ g/mol has been successfully synthesized in a short reaction time of 100 min. Furthermore, some block copolymers containing saccharide segment with butyl or methyl methacrylate were prepared. Copyright © 2007 John Wiley & Sons, Ltd.     

2,6-diaza-4,8-dicyanosemibullvalene. A short lived intermediate?

Reductive dehalogenation of dichloride with magnesium affords the new stable diazacyclooctatetraene (1,5-diazocine) . There is strong evidence for the intermediate formation of a 2, 6-diaza-4,8 - dicyanosemibullvalene .     

Hydrogen-induced reconstruction of transition metal surfaces

This study compares the results of a number of recent papers on hydrogen adsorption on Rh(110), Rh(311) and Fe(211) as well as on Ni(111) and Fe(110) surfaces. It particularly deals with the structural aspect of these low energy electron diffraction (LEED) investigations and correlates them, if available, with respective thermodesorption data. Upon dissociative adsorption by a non activated process hydrogen induces local displacements of the atoms about the adsorption sites. With increasing coverage these displacements order to form a sequence of weakly reconstructed phases and gradually lift the surface layer relaxation of the formerly clean surface. Along close packed rows of metal surface atoms hydrogen atoms tend to occupy threefold coordinated adsorption sites which, in turn, arrange in single or double chains. The coverage dependent periodicity of these adlayer structure elements together with the respective shift buckling of the substrate surface generates the observed superstructures. Since not only open but also close packed surfaces show this weak (and sometimes strong) reconstruction upon hydrogen adsorption it should be generally considered in all adsorption systems.     

Novel peripherally functionalized seco-porphyrazines: synthesis, characterization and spectroscopic evaluation

Co-macrocyclizations of 2,3-dipropylmaleonitrile and 2,3-di-(4-(methoxycarbonyl)phenyl)maleonitrile, respectively, with N,N′-dibenzyl-N,N′-di-(11-tetrahydropyranyloxy-3,6,9-trioxo-undecyl))maleonitrile and N,N,N′,N′-tetramethylmaleonitrile were used to prepare derivatives of the 4,5-diamino-porphyrazine systems including the zinc(II) complexes. Subsequent oxidation of the macrocycles with potassium permanganate gave the corresponding seco-porphyrazines. These were shown to be efficient sensitizers for the production of singlet oxygen (Φ_Δ=0.15-0.57) by the determination of their photophysical properties.     

Certification of reference materials and accreditation of reference material producers: Questionable terminology leads to confusion

In the view of the Deutscher Kalibrierdienst (DKD) , a certifying body for reference materials can be considered to be a calibration laboratory. Therefore, accreditation of calibration laboratories in accordance with ISO/IEC 17025 is the most appropriate way to establish confidence in certificates for reference materials. If necessary, the criteria of ISO/IEC 17025 can be tailored to specific cases. There is no need to provide any new kind of reference-material specific accreditation. However, in view of the variety of reference materials and the practice existing in other countries, accreditation of testing laboratories and product certification bodies may optionally be acceptable as long as the same stringent principles with respect to traceability and measurement uncertainty are applied. Such accreditations but not accreditations of reference material producers (ISO Guide 34) are also covered by existing international mutual recognition arrangements (MRA).