Raman spectroscopy of synthetic organic pigments used in 20th century works of art

Raman microscopy allows a non‐destructive characterisation of inorganic and organic painting materials such as pigments and organic dyestuffs. The objectives of this study are the more recent organic pigments typically present in paintings and other art works from the 20th century. More than 20 organic synthetic pigments from different chemical classes could be identified by Raman spectroscopy using different excitation wavelengths (457.9, 476.5, 487.9, 514.5, 632.8, and 1064 nm). To evaluate the performance for real paint samples, varying paint mixtures of the Hansa Yellow pigment PY 3 and the binding medium Mowilith, a polyvinyl acetate (PVAC) compound, were characterised; PY 3 was determined at a 1 wt% level in the binder. In addition, commercial tube paints containing the quinacridone violet PV 19 were studied. The pigment was clearly identified in all of these more complex oil and acrylic paints. Finally, alizarin (PR 83) and a green copper phthalocyanine pigment (PG 7) could unambiguously be identified by Raman microscopy in the painting ‘Woman with mandolin in yellow and red’ of Max Beckmann dating 1950. The discovery of a red naphthol AS pigment by Raman spectroscopy in a sample from the ‘Three field workers’ by Georg Baselitz (1964/1965) demonstrated that in some cases complementary chromatographic methods are needed for a comprehensive identification of the organic pigments. Copyright © 2008 John Wiley & Sons, Ltd.     

A cross-spectrum weighting algorithm for speech enhancement and array processing: combining phase-shift information and stationary signal properties

In this paper, a gain function for noise cancellation with a two-channel microphone array is presented. This gain function combines ideas from one- and multichannel algorithms. It is developed using a minimum mean square error estimator for the amplitude of the speech signal from the cross spectrum between two microphone signals. To consider speech pauses and the absence of spectral components of the speech, an extension of this gain function is presented. The performance of the overall gain function is shown in terms of the cancellation of (diffuse) driving noise as well as the cancellation of an interfering speech signal, both recorded in a car.     

Crystalline Pr:SrAl12O19 waveguide laser in the visible spectral region

We fabricated waveguides in Pr:SrAl(12)O(19) crystals by direct femtosecond laser writing. The propagation losses were calculated to be as low as 0.16 dB/cm at a wavelength of 633 nm. Laser oscillation in a diode-pumped waveguide at a wavelength of 643.5 nm was realized. The output power of the waveguide laser was 28.1 mW at a slope efficiency of 8%.     

Characterization of Standard Reference Material 2942, Ce-ion-doped glass, spectral correction standard for UV fluorescence

Standard Reference Material (SRM) 2942 is a cuvette-shaped, Ce-ion-doped glass, recommended for use for relative spectral correction of emission from 320 to 430 nm and day-to-day performance verification of steady-state fluorescence spectrometers. Properties of this standard that influence its effective use or contribute to the uncertainty in its certified emission spectrum were explored here. These properties include its photostability, absorbance, dissolution rate in water, anisotropy and temperature coefficient of fluorescence intensity. The expanded uncertainties in the certified spectrum are about 9% around the peak maximum at 330 nm, using an excitation wavelength of 310 nm. The SRM also exhibits a strong resistance to photodegradation, with no measurable decrease in fluorescence intensity even after 25 h of irradiation with UV light>280 nm from a Xe lamp.     

Crack-free micromachining on glass substrates by visible LIBWE using liquid metallic absorbers

Laser induced backside wet etching (LIBWE) is a promising laser direct-write technique for etching transparent materials and for producing high precision and near-optical quality surfaces. In this study, visible LIBWE using gallium and eutectic indium/gallium as absorbers was used for crack-free microfabrication of sodalime and quartz. Eutectic indium/gallium (In/Ga) has a melting temperature lower than metallic gallium does and the etching rate by using In/Ga was found to be similar to that by gallium for visible LIBWE. When using the gallium absorber, the etching threshold of quartz by visible LIBWE was about one-third of that by UV LIBWE. The heat-affected zone of the quartz etching was negligible at the trench rim in the visible LIBWE process. The wettability of the metallic absorbers on the substrates affects aspect ratio and is a new important factor for LIBWE. In addition, etching rate decreased when repetition rate was increased.     

Depth profiling by means of sims: Recent progress and current problems

The present state of the art of secondary ion mass spectrometry (SIMS), applied to the in-depth analysis of impurity concentration profiles, is reviewed critically. It is shown that SIMS has reached a level of perfection which is unparalleled by other analytical techniques. There are, however, several effects which may cause deviations of the measured profile from the original dopant distribution. These detrimental effects are due to interaction of primary ions with the residual gas, adsorption and incorporation of residual gases, sputtering yield variations due to the accumulation of probe atoms in the sample, mass interference between molecular ions and the atomic species under study and, last but not least, beam-induced relocation of dopant atoms (“atomic mixing”). Methods for minimizing the respective disturbing effect are discussed.     

Equilibrium charge-state fractions for 2.7–31 keV deuterium atoms and ions in strontium vapor

Equilibrium charge-state fractions of 2.7–31 keV deuterium in strontium vapor are reported. The energy dependence of the D^- equilibrium yield is discussed. The results are compared with the D^- yield in cesium and magnesium vapors.     

Simultaneous determination of temperature and OH-concentration in flames using high-resolution laser-absorption spectroscopy

The development of tunable cw dye lasers with an extremely narrow bandwidth of <20 MHz and high stability in frequency and amplitude, which operate in the wavelength region from 2800 to 3150 Å by frequency doubling, has made possible the quantitative proof of the presence of OH with high-resolution laser-absorption spectroscopy.A method is presented, which allows the simultaneous measurement of temperature and OH-concentration by tuning across a suitable rotational line.     

The classical limit for quantum mechanical correlation functions

For quantum systems of finitely many particles as well as for boson quantum field theories, the classical limit of the expectation values of products of Weyl operators, translated in time by the quantum mechanical Hamiltonian and taken in coherent states centered inx- andp-space around? ^?1/2 (coordinates of a point in classical phase space) are shown to become the exponentials of coordinate functions of the classical orbit in phase space. In the same sense,? ^?1/2 [(quantum operator) (t) — (classical function) (t)] converges to the solution of the linear quantum mechanical system, which is obtained by linearizing the non-linear Heisenberg equations of motion around the classical orbit.