Effect of temporal resolution on the estimation of left ventricular function by cardiac MR imaging

The aim of this study was to investigate the effect of temporal resolution on the estimation of left ventricular (LV) function by cardiac magnetic resonance (MR) imaging using a steady-state free precession (SSFP) sequence. Left ventricular function was assessed by cine MR imaging using a segmented SSFP sequence in 10 healthy volunteers. Views per segment (VPS) were set at 8 and 20, resulting in high and low true temporal resolution, respectively. Irrespective of VPS, images were reconstructed at 40 cardiac phases, providing high apparent temporal resolution. Data were analyzed using 40, 20 and 10 phases to simulate different apparent temporal resolutions. Increasing the cardiac phases used for analysis slightly decreased mean end-systolic volume (ESV) and slightly increased mean ejection fraction (EF). No substantial difference in estimates of end-diastolic volume (EDV) was found between VPSs of 8 and 20. Imaging with a VPS of 20 yielded a larger ESV and smaller EF than imaging with a VPS of 8 when 40 phases were used. In conclusion, low true temporal resolution causes overestimation of ESV and underestimation of EF. Improvement of apparent temporal resolution mildly reduces but does not eliminate the errors caused by low true temporal resolution.     

Focal length measurement of a varifocal liquid lens with capacitance detection

This paper reports on a detailed deformation model of varifocal liquid lenses fabricated by Parylene-on-liquid-deposition (POLD), which can be applied to measure and adjust the focal length of such lenses without using extra sensors or sensing mechanisms. The lens was fabricated by encapsulating a liquid between a transparent electrode and a polymer film that was covered with a metal electrode. When voltage is applied to the two electrodes, the lens deforms due to the electrostatic force, and its focal length and the capacitance between the two electrodes change simultaneously. This characteristic enables the focal length of the lens to be adjusted and detected by measuring the capacitance change. The focal length of the fabricated varifocal liquid lens changed from 153.6 to 82.6 mm by applying 150-V. The focal length change of the liquid lens was calculated from the change in its capacitance. Finally, to confirm the efficiency of this varifocal liquid lens, we fabricated a confocal distance sensor using the lens for laser scanning and demonstrated that this system can be used to measure distances of 94–140 mm with an average error of 0.83 mm and a standard deviation of 0.77 mm.     

Self-energy correction to momentum-density distribution of positron-electron pairs

Positron two-dimensional angular correlation of annihilation radiation (2D ACAR), i.e., the 2D projection of the electron momentum densities sampled by positron, in Si is employed to verify the prediction of the density functional theory within the local-density approximation (LDA). Carefully conducted test shows that the LDA introduces small but definite discrepancies to the 2D-ACAR anisotropies. Self-energy calculation using the GW method indicates that density-fluctuation contributes anisotropic momentum-density correction and thus improves the agreement between theory and experiment. These results provide valuable annotations to the arguments concerning the accuracy and validity of the LDA and GW schemes.     

Blended lithium ion conducting polymer electrolytes based on boroxine polymers

A new series of blended polymer electrolytes based on a boroxine polymer (BP) with poly(ethylene oxide) (PEO), an ethylene oxide–propylene oxide copolymer or poly(methyl methacrylate) were prepared. Good room temperature mechanical properties were exhibited by electrolytes containing in excess of 30% PEO. Cationic transference number measurements indicated that a slight improvement in lithium ion conductivity could be achieved by using a mixture of LiCF₃SO₃ and LiN(CF₃SO₂)₂ as the electrolyte salt. Electrolytes incorporating significant proportions of BP exhibited reduced lithium–polymer electrolyte interfacial resistance.     

Effect of Immobilization on Insoluble Collagen Concentration and Type I and Type III Collagen Isoforms of Rat Soleus Muscle

Immobilization is often associated with decreased muscle elasticity. This condition is known as muscle contracture; however, the mechanism remains unclear. The purpose of this study was to clarify the mechanism governing muscle contracture in rat soleus muscle by identifying changes in ankle joint mobility, insoluble collagen concentration and type I and type III collagen isoforms following 1- and 3-week immobilizations. Following a 1-week immobilization, range of motion (ROM) of dorsiflexion declined to 90% of the control value; additionally, ROM dropped to 67.5% of the control value after a 3-week immobilization. This finding suggested that ankle joint mobility decreases in conjunction with extended periods of immobilization. Insoluble collagen concentration in soleus muscles, which was unchanged after 1 week of immobilization, increased 3 weeks after immobilization. These results may be indicative of collagen fibers with strong intermolecular cross-links contained in the muscle was made increased relatively by 3 weeks of immobilization. Therefore, the change in intermolecular cross-links may be significant in terms of progress of muscle contracture with longer periods of immobilization. On the other hand, the ratio of type III to type I collagen isoforms in muscular tissue increased following a 1-week immobilization; moreover, this ratio remained constant after 3 weeks of immobilization. These data suggested that muscle immobilization may induce type III collagen isoform expression. The increase in the ratio of type III to type I collagen isoforms do not change in parallel with the increase in the limitation in ROM; however, this phenomenon probably is not closely related to the progress of muscle contracture. The change of collagen isoform in immobilized muscle may be involved in the mechanism governing the progression of muscle fibrosis.     

Evolution of the gain extinction ratio in dual-pump phase sensitive amplification

We have experimentally achieved a gain extinction ratio (GER) of 30 dB at 21.75 dBm pump power in a dual-pump phase sensitive amplifier based on highly nonlinear fiber, which is more efficient than what we predict with the conventional three-wave model. We point out that high-order sidebands play a key role. Then we scrutinize the trajectories of the output signal vector in the complex plane with increasing nonlinear phase shift and understand the roll-over behavior of GER versus pump power curve. We found that the phase "flip" of the output signal occurs around the largest GER. Adjusting design parameters, we show how to improve GER.     

Enhanced photon generation in a Nb/n-InGaAs/p-InP superconductor/semiconductor-diode light emitting device

We experimentally demonstrate Cooper pairs' drastic enhancement of the band-to-band radiative recombination rate in a semiconductor. Electron Cooper pairs injected from a superconducting electrode into an active layer by the proximity effect recombine with holes injected from a p-type electrode. The recombination of a Cooper pair with p-type carriers dramatically increases the photon generation probability of a light-emitting diode in the optical-fiber communication band. The measured radiative decay time rapidly decreases with decreasing temperature below the superconducting transition temperature of the niobium electrodes. Our results indicate the possibility to open up new interdisciplinary fields between superconductivity and optoelectronics.     

F2 laser induced oxidation of inorganic material

Transparent SiO₂ thin films were selectively fabricated on Si wafer by 157 nm F₂ laser in N₂/O₂ gas atmosphere. The F₂ laser photochemically produced active O(¹D) atoms from O₂ molecules in the gas atmosphere; strong oxidation reaction could be induced to fabricate SiO₂ thin films only on the irradiated areas of Si wafer. The oxidation reaction was sensitive to the single pulse fluence of F₂ laser. The irradiated areas were swelled and the height was approximately 500-1000 nm at the 205-mJ/cm² single pulse fluence for 60 min laser irradiation. The fabricated thin films were analytically identified to be SiO₂ by the Fourier-transform IR spectroscopy. The SiO₂ thin films could be also removed by subsequent chemical etching to fabricate micro-holes 50 nm in depth on Si wafer for microfabrication.     

A Semiconductor Waveguide-Type Optical Frequency Shifter

A waveguide-type optical frequency shifter based on a rotating half-wave plate is proposed. The underlying principle can be used to realize a bit-rate-free and modulation-code-free optical frequency shifter. The waveguide was formed along the ≪1 1 1> direction on a GaAs (1 1 0) substrate by molecular beam epitaxy (MBE) and reactive ion beam etching (RIBE). A 10-MHz optical frequency shift with 16 V_p-p applied voltage and 22.5% shift efficiency is demonstrated.     

Electronic state on the surface in the strongly correlated electron systems

In order to clarify the tunneling spectroscopy in high-T_c cuprates, we study electronic state of the surface in the strongly correlated electron systems. First, we obtain Green's function of strongly correlated normal bulk system using the fluctuation exchange (FLEX) approximation. Next, we insert infinite potential into the bulk system and obtain Green's function of surface. We find that the density of states (DOS) in strongly correlated bulk systems are different from that on the surface, and the difference decreases as the magnitude of Coulomb interaction (U) increases.