Focal length measurement of a varifocal liquid lens with capacitance detection

This paper reports on a detailed deformation model of varifocal liquid lenses fabricated by Parylene-on-liquid-deposition (POLD), which can be applied to measure and adjust the focal length of such lenses without using extra sensors or sensing mechanisms. The lens was fabricated by encapsulating a liquid between a transparent electrode and a polymer film that was covered with a metal electrode. When voltage is applied to the two electrodes, the lens deforms due to the electrostatic force, and its focal length and the capacitance between the two electrodes change simultaneously. This characteristic enables the focal length of the lens to be adjusted and detected by measuring the capacitance change. The focal length of the fabricated varifocal liquid lens changed from 153.6 to 82.6 mm by applying 150-V. The focal length change of the liquid lens was calculated from the change in its capacitance. Finally, to confirm the efficiency of this varifocal liquid lens, we fabricated a confocal distance sensor using the lens for laser scanning and demonstrated that this system can be used to measure distances of 94–140 mm with an average error of 0.83 mm and a standard deviation of 0.77 mm.     

A Semiconductor Waveguide-Type Optical Frequency Shifter

A waveguide-type optical frequency shifter based on a rotating half-wave plate is proposed. The underlying principle can be used to realize a bit-rate-free and modulation-code-free optical frequency shifter. The waveguide was formed along the ≪1 1 1> direction on a GaAs (1 1 0) substrate by molecular beam epitaxy (MBE) and reactive ion beam etching (RIBE). A 10-MHz optical frequency shift with 16 V_p-p applied voltage and 22.5% shift efficiency is demonstrated.     

Precise nuclear moments of extremely proton-rich nuclus 23 Al

Electric quadrupole coupling constant eqQ/h of the extremely proton-rich ²³Al (I ^π ?=?5/2^?+?, T _1/2?=?0.47 s) nucleus implanted into an Al₂O₃ single crystal has been measured for the first time, using the β-ray detecting nuclear quadrupole resonance method (β-NQR) in a high magnetic field. As a preliminary result, the quadrupole coupling constant was determined as |eqQ/h(²³Al) |?=?2.66±0.77 MHz. Using the quadrupole coupling constant of ²⁷Al in Al₂O₃ as a reference, the Q moment of the ground state of ²³Al was extracted as |Q(²³Al)|?~?160 mb, which is well explained by the shell model calculation in the sd-shell model space with the USD interaction.     

Tamper resistance in optical excitation transfer based on optical near-field interactions

We present tamper resistance in optical excitation transfer via optical near-field interactions based on the energy dissipation process occurring locally in nanometric devices such as quantum dots. A theoretical comparison with electrical systems is also shown, focusing on the required environmental conditions. Numerical simulations based on virtual photon models demonstrate high tamper resistance.     

Observation of THz coherent transition radiation from single-bunch beam at KURRI-LINAC as an intense pulsed light source

A single-bunch beam has been generated using a developed high-speed avalanche-type pulser in KURRI-LINAC in order to lift restrictions of the spectral resolution in the spectroscopic study and the delay time in the time-resolved measurement. Both of the rise and fall times of the developed pulser are 110 ps. The observation of CTR has confirmed the single-bunch beam. The degree of impurity of single bunch has been estimated to be 1.5% by the analysis of the interferogram.     

The optical characteristics of planar bilayered metallic prisms

A planar bilayered silver prisms with rounded corner is shown to have a singular optical mode depends of gaps by numerical simulation. Such behavior results from the plasmon resonance in the pairs of nanoprisms both the electric and the magnetic components of light.     

Ascent of open-circuit voltage on diamond-like carbon photovoltaic cell by infrared heating-assisted pulsed-laser deposition

Phosphorus-doped diamond-like carbon (DLC) films were deposited on quartz and p-type silicon (p-Si) substrates by pulsed-laser deposition. Open-circuit voltage (V _oc) and short-circuit density (I _sc/cm²) from a heating process converted from one type of electrode to another and the two types of electrode pattern are shown by the V–I characteristics. The first heating process was by a ceramic heater, and the other was by an infrared heater. We adopted two electrode patterns, from a bipectinate electrode and a plot pattern electrode, to measure electric photovoltaic characteristics. We were able to upgrade V _oc and I _sc/cm² to 35∼45 mV, and 0.24 μA/cm², respectively, under infrared heating. V _oc by the plot pattern electrode was over 2 V under infrared heating and ceramic heating did not match this on deposition by the PLD method.     

Electronic absorption and emission spectra of Alq3 in solution with special attention to a delayed fluorescence

Tris(8-quinolinolato)aluminum(III) (Alq₃) shows electronic absorption bands at 378, 360 (in a 1:1 mixed solvent of methanol and ethanol (ME) at 77 K), 334, 316, 300, 263, 255.8, and 233 nm in ethanol at room temperature. According to the polarized fluorescence excitation spectrum together with MO calculations, for instance, the 360 nm band is assigned to an LL CT transition (an intramolecular charge transfer transition between two ligands), and the 378 nm band to an LM/ML CT one (an intramolecular charge transfer transition between ligand and metal). Alq₃ shows a broad fluorescence band peaking at around 478 nm in the ME matrix at 77 K. The emission spectrum measured with a phosphoroscope has two emission bands at 567 and 478 nm. The 567 nm band accompanies vibronic bands at 578 and 605 nm, being safely assigned to a phosphorescence of Alq₃. The lifetimes of the 478 and 567 nm bands are both 5.4 ms. The lifetime of the 478 nm band together with the band position and its band shape indicate that this band can be assigned to a delayed fluorescence.     

An injection-locked single-mode tea CO2 laser for SMM laser pumping

A D₂O laser has been developed for collective Thomson scattering measurements of ion temperature in high temperature plasmas. A pulse duration and a spectral width of a high power D₂O laser has been successfully controlled for this purpose, by using a TEA CO₂ laser injection-locked by an etalon-tuned TEA CO₂ laser as a pump source.