Optical current transducers using flint glass fiber as the faraday sensor element

This paper describes development of the optical current transducers using flint glass fiber as the Faraday effect sensing element. Excellent polarization properties of the fiber with low birefringence are described, and the design and test data of a current transducer using the fiber manufactured for use in electric power facilities are reviewed. Experimental results on flexible characteristics of a scheme with round trip light transmission in the fiber is also reported.     

Self-Restoration Properties of VWP Networks by Spare Wavelength Optimization

The self-restoration properties in VWP networks are investigated with optimization about spare wavelength by simulations. Rapid restoration can be achieved by selection of rerouting path with long delay and no delay-limitation for new routes.     

Preparation and properties of a fullerene/polysiloxane hybrid from chemically modified fullerene and polymethoxysiloxane

An organic–inorganic hybrid was prepared by simply mixing a fullerene derivative with polymethoxysiloxane. First, C₆₀ was subjected to a radical addition reaction with 4,4′-azobis(4-cyanovaleric acid) to provide a C₆₀ derivative. Polymethoxysiloxane was prepared by a controlled hydrolytic condensation of tetramethoxysilane. These two compounds were mixed and heated to provide hybrid bulk body. The hybrid bulk body showed high mechanical strength and elastic modulus compared with polymethoxysiloxane or the C₆₀/polymethoxysiloxane hybrid. The formation of a dense siloxane network was established by a homogeneous mixing of the C₆₀ derivative with polymethoxysiloxane.     

VLS Growth of ITO Whiskers Prepared by the Electron Shower Method

Indium tin oxide (ITO) whiskers were grown by VLS (vapour-liquid-solid) mechanism, using the electron shower method. The whiskers were grown above 200 °C, and the deposition rate was above 0.6 nm/s. The electron shower controlled the size of the whiskers, and the size was 30 nm in diameter and 600 nm in length. The whiskers grew along the substrate at t < 300 s, but grew in a direction perpendicular to the substrate at t > 300 s. When the ITO whiskers grown along the substrate were used as NO₂ gas sensor, the sensitivity was 340, and about 300 times higher than those of the whiskers grown in a direction perpendicular to the substrate and plate-like ITO crystallites.     

Operating Limits for Stable Growth of Silicon Fibers with Diameter Less Than 150 μm by Modified μ-PD Method

The μ-PD method originally developed for oxide crystals has been modified and applied for filamentary silicon crystal growth. Our main modification of μ-PD method is concerned with an arrangement of melt permeable feeder which is inserted into the nozzle. The feeder finishes by a sharp tip the diameter of which (is almost the same as that of the desired semiconductor fiber, i.e., less than 150 μm. Silicon fibers were grown from the small liquid pool at the end of the feeder. Three types of crucible-die arrangement were designed and tested. The best results were obtained with the help of inclined insert made of graphite fibers because of its ability to quench oscillations and longer operation life. Fiber crystals, 100 μm in diameter and 70 mm in length, have been grown successfully. Small meniscus stability, operating limits of μ-PD method and silicon carbide formation during the growth process are discussed.     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

Critical exponent and critical blow-up for quasilinear parabolic equations

B ₂-groups are special (torsion-free) abelian Butler groups. The interest in this class of groups comes from representation theory. A particular functor, also called Butler functor, connects algebraic properties of the category of free abelian groups with (a few) distinguished subgroups with these Butler groups. This helps to understand Butler groups and caused lots of activities on Butler groups. Butler groups were originally defined for finite rank, however a homological connection discovered by Bican and Salce opened the investigation of Butler groups of infinite rank. Despite the fact that classifications of Butler groups are possible under restriction even for infinite rank (see a forthcoming paper by Files and Göbel [Mathematische Zeitschrift]), general structure theorems are impossible. This is supported by the following very special case of the Main Theorem of this paper, showing that any ring with a free additive group is an endomorphism ring of a Butler group. The result implies the existence of large indecomposable or of large superdecomposable Butler groups as well as the existence of counter-examples for Kaplansky’s test problems.