Electrochemical reduction of camphorquinone in DMF in the presence of a proton donor

The electroreduction of camphorquinone in DMF, at mercury electrodes, was investigated by a variety of techniques. In DMF, in the absence of proton donor, camphorquinone exhibits two one-electron waves: the first, a one-electron reversible wave to be due to a reversible charge transfer without a coupled chemical reaction. After the first charge transfer, the semidione anion radical is reduced to the dianion. The irreversibility of the second wave derives from a fast irreversible protonation of the dianion. A wide variety of changes in behaviour is observed in the reduction of camphorquinone as increasing amounts of benzoic acid are added: a new two-electron irreversible wave appears at a potential less negative than the original wave. A proton donor to substrate ratio of 2 is required to completely suppress the two original waves. A mechanism for the electroreduction of camphorquinone is proposed and discussed on the basis that the prewave current is controlled by the diffusion of the undissociated acid species and that the undissociated acid, rather than the solvated proton, takes part in the protonation, prior to the charge transfer.     

Formatation of pore structure in tape-cast alumina membranes – effects of binder content and firing temperature

Disc type ceramic aluminium oxide membrane has been prepared by tape casting technique. Thickness of this single layer membrane is in the range 200–300 μm. Porosity and pore size distribution have been determined by mercury porosimetry. Polymeric binder content of the green tape and the firing temperature are found to have strong influence on the average pore size, pore size distribution and overall porosity. Higher binder content promotes agglomeration of the ceramic particles, which on firing leads to wider pore size distribution and formation of closed pores. Pore coarsening is observed with increasing firing temperature.     

PHOTODYNAMIC DAMAGE AND ITS REPAIR IN Vibrio cholerae

Abstract— Repair of photodynamic damage induced by acriflavine and visible light has been examined in three strains of Vibrio cholerae differing in their capabilities to repair ultraviolet (UV) light induced DN A damage. Excision repair deficient wild type cells of strain 154 are more sensitive to photodynamic treatment compared to repair proficient cells of strain 569B. However, no difference in their capabilities to repair of damage following photodynamic treatment can be detected. No single-strand breaks in the irradiated cell DNA are observed when the cell survival is more than 10%. Single-strand breaks observed at cell survival less than 5% are not dark repairable even in excision repair proficient wild type cells. Repair of membrane damage can partially account for the recovery observed at low doses. In contrast, radiation-sensitive mutant 569B_s cells which lack both excision and medium-dependent dark repair for UV-lesions are most efficient in repairing damage induced by photodynamic treatment.     

Dependence of the catalytic activity of organoaluminum compounds and some of their complexes on their composition

The influence of the acidity of organoaluminum compounds and their complexes on the catalytic activity in polymerization of trioxane has been studied. It is found that the catalytic activity of organoaluminum compounds of the type R_nALX_3?n depends on n as well as the nature of R or X. Catalytic activity of the complexes also depends on the type of cocatalyst used. The change of electroconductivity in the course of formation of some initiator complexes has been studied and an attempt has been made to determine the relation between conductivity and polymerization activity.     

Aromatic-aromatic interactions in crystal structures of helical peptide scaffolds containing projecting phenylalanine residues

Aromatic-aromatic interactions between phenylalanine side chains in peptides have been probed by the structure determination in crystals of three peptides: Boc-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-OMe, I; Boc-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-OMe, II; Boc-Aib-Ala-Phe-Aib-Phe-Ala-Val-Aib-OMe, III. X-ray diffraction studies reveal that all three peptides adopt helical conformations in the solid state with the Phe side chains projecting outward. Interhelix association in the crystals is promoted by Phe-Phe interactions. A total of 15 unique aromatic pairs have been characterized in the three independent crystal structures. In peptides I and II, the aromatic side chains lie on the same face of the helix at i/i + 4 positions resulting in both intrahelix and interhelix aromatic interactions. In peptide III, the Phe side chains are placed on the opposite faces of the helix, resulting in exclusive intermolecular aromatic interactions. The distances between the centroids of aromatic pair ranges from 5.11 to 6.86 A, while the distance of closest approach of ring carbon atoms ranges from 3.27 to 4.59 A. Examples of T-shaped and parallel-displaced arrangements of aromatic pairs are observed, in addition to several examples of inclined arrangements. The results support the view that the interaction potential for a pair of aromatic rings is relatively broad and rugged with several minima of similar energies, separated by small activation barriers.     

Anwendung der Streustrahl-Methode zur Bestimmung der Elemente in Mineral?lprodukten mit Hilfe der R?ntgenfluorescenz-Spektral-Analyse am Beispiel der Bleibestimmung in Ottokraftstoffen

Zusammenfassung In einem relativ einfach durchzuführenden Verbundverfahren wird Selen im Sauerstoff-strom innerhalb 15 min bei 1100–1150°C quantitativ aus den Metall- bzw. Metalloxidschmelzen verdampft und in einer mit flüssigem Stickstoff gekühlten Vorlage aufgefangen. Das aus der Vorlage mit einer definierten Menge verdünnter HNO₃ in Gegenwart von Ni-Nitrat gelöste Selen läßt sich direkt durch AAS mit dem Graphitofen (FAAS) äußerst nachweisstark und zuverlässig bestimmen. Die Nachweisgrenze (elektrodenlose Entladungslampe) liegt bei 3×10^–11 g Se. Der Verfahrensverbund erlaubt mit Probenmengen 10 g in Ag und Au Se-Gehalte 0,05 ppb,inCu 0,1 ppb,in Bi 0,2 ppb und in Pb 10 ppb zu erfassen. Für draht-, stab- und spanförmige Proben erhält man für Se-Gehalte von 2–0,002 ppm Variationskoeffizienten zwischen 3 und 6%. Die Vollständigkeit der Se-Verdampfung aus den Matrices Cu, Ag, Au und Bi wurde ebenso wie die Richtigkeit des Gesamtverfahrens durch systematische Untersuchungen belegt.

---

Determination of se by furnace atomic absorption spectrometry (FAAS) in the ppb-range in Cu, Cu alloys, Ag, Au, Pb and Bi after volatilization in an oxygen stream

Summary Selenium is evaporated in a multi-stage procedure within 15 min from metals or metal oxides fused at temperatures of 1100–1150°C under a stream of oxygen and is trapped in a receiver cooled with liquid nitrogen. The condensed SeO₂ is dissolved with a definite volume of diluted HNO₃ in the presence of Ni-nitrate and determined with high sensitivity and reliability by FAAS (electrodeless discharge lamp). The detection limit of the FAAS was found to be 3 · 10^–11 g of Se. The multi-stage procedure allows to detect Se levels 0.05 ppb in Ag and Au, 0.1 ppb in Cu, 0.2 ppb in Bi, and 10 ppb in Pb, respectively, with sample weights 10 g. For wire, rod, and chip samples the coefficients of variation are found to be between 3 and 6% for Se contents of 2 to 0.002 ppm. The quantitative evaporation of Se from Cu, Ag, Au, and Bi as well as the accuracy of the whole procedure have been checked systematically.

Die Arbeit wurde durch Mittel der DFG in dankenswerter Weise unterstützt.     

The alkylation of benzimidazole derivatives with γ-valerolactone

Reaction of 1, 3-dimethylbenzimidazolone and its 5-methyl and 5-chloro derivatives with -valerolactone in presence of anhydrous aluminum chloride gives the corresponding 6-(1-methyl-3-carboxypropyl)-benzimidazolones.     

Darstellung,Eigenschaften und Kristallstruktur von Bis(phthalocyaninato)cer(IV)

Preparation, Properties and Crystal Structure of Bis(phthalocyaninato)cerium(IV) The anodic or chemical oxidation with dibenzoylperoxide of solutions of bis(phthalocyaninato)cerate(III) in dichloromethane yields selectively sparely soluble bis(phthalocyaninato)cerium(IV), [Ce(Pc(2-)) 2 ]. Green, monoclinic needles cristallize with a = 18.783(12) Å b = 18.739(16) Å c= 15.618(10) Å ß114.30(7)°; Z = 4; space group C2/c. [Ce(Pc(2–)) 2 ] is a sandwich complex in which the cerium Atom is eightfold coordinated by the isoindole nitrogens of the two staggered convex Pc-rings. The u.v.-vis., m.i.r., f.i.r. and resonance Raman spectra are consistent with the structure.     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.     

Chemiluminescent ion-molecule reactions in the system C+ + H2

The optical emission resulting from collisions between C⁺ ions and H₂ gas was measured in the energy range 2 to 20 eV_c.m.. The observed spectrum consists mainly of the CH⁺ A ¹Π → X ¹Σ⁺ band system; CH⁺ (A ^fΠ) is shown to be formed in the chemiluminescent reactio: C⁺(²P⁰) + H₂ → CH⁺(A ¹Π) + H(²S). The energy dependence of the emission cross section was measured. The occurrence of this reaction is discussed in terms of a electronic state correlation diagram for the system.