Developing CRISPR/Cas9-Mediated Fluorescent Reporter Human Pluripotent Stem-Cell Lines for High-Content Screening

Application of the CRISPR/Cas9 system to knock in fluorescent proteins to endogenous genes of interest in human pluripotent stem cells (hPSCs) has the potential to facilitate hPSC-based disease modeling, drug screening, and optimization of transplantation therapy. To evaluate the capability of fluorescent reporter hPSC lines for high-content screening approaches, we targeted EGFP to the endogenous OCT4 locus. Resulting hPSC–OCT4–EGFP lines generated expressed EGFP coincident with pluripotency markers and could be adapted to multi-well formats for high-content screening (HCS) campaigns. However, after long-term culture, hPSCs transiently lost their EGFP expression. Alternatively, through EGFP knock-in to the AAVS1 locus, we established a stable and consistent EGFP-expressing hPSC–AAVS1–EGFP line that maintained EGFP expression during in vitro hematopoietic and neural differentiation. Thus, hPSC–AAVS1–EGFP-derived sensory neurons could be adapted to a high-content screening platform that can be applied to high-throughput small-molecule screening and drug discovery campaigns. Our observations are consistent with recent findings indicating that high-frequency on-target complexities appear following CRISPR/Cas9 genome editing at the OCT4 locus. In contrast, we demonstrate that the AAVS1 locus is a safe genomic location in hPSCs with high gene expression that does not impact hPSC quality and differentiation. Our findings suggest that the CRISPR/Cas9-integrated AAVS1 system should be applied for generating stable reporter hPSC lines for long-term HCS approaches, and they underscore the importance of careful evaluation and selection of the applied reporter cell lines for HCS purposes.     

The investigation of femoroacetabular impingement using motion capture,FEM and multi-body simulations

In recent years, femoroacetabular impingement (FAI) has become increasingly common. As published in the literature, FAI is caused by an unphysiological contact between the proximal femur and the acetabular rim, which may lead to pain, limitation of movement, and damage of cartilage. In this paper, patient-specific finite element simulations of the movement of the hip based on gait motion data and MRI segmentation were conducted to check stresses of the acetabulum and femur, and additionally whether a bony contact is present or not. The study's findings show no bony contact between femur and acetabulum, which may lead to the hypothesis that the labrum and its deformation and/or the articular capsule are involved in the mechanism of FAI. In order to verify this hypothesis more simulations including labrum and capsule must be performed. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Epitaxial graphene perfection vs. SiC substrate quality

Polytype instability of SiC epitaxial films was the main focus of attention in the experiment performed since this factor has a decisive influence on graphene growth, which was the second stage of the experiment. Layers deposited in various initial C/Si ratios were analyzed.     

Poly(vinylbenzyl Pyridinium Salts) as Novel Sorbents for Hazardous Metals Ions Removal

Novel efficient complexing resins—poly(vinylbenzyl pyridinium salts) fabricated through poly(vinylbenzyl halogene-co-divinylbenzene) quaternization of N-decyloxy-1-(pyridin-3-yl)ethaneimine and N-decyloxy-1-(pyridin-4-yl)ethaneimine—were tested as adsorbents of Pb(II), Cd(II), Cu(II), Zn(II), and Ni(II) from aqueous solutions. The structure of these materials was established by ¹³C CP-MAS NMR, X-ray photoelectron spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy, as well as thermogravimetric and differential thermal analyses. The textural properties were determined using scanning electron microscopy and low-temperature N₂ sorption. Based on the conducted sorption studies, it was shown that the uptake behavior of the metal ions towards novel resins depended on the type of functionalities, contact time, pH, metal concentrations, and the resin dosage. The Langmuir model was investigated to be the best one for fitting isothermal adsorption equilibrium data, and the corresponding adsorption capacities were predicted to be 296.4, 201.8, 83.8, 38.1, and 39.3 mg/g for Pb(II), Zn(II), Cd(II), Cu(II), and Ni(II), respectively. These results confirmed that owing to the presence of the functional pyridinium groups, the resins demonstrated proficient metal ion removal capacities. Furthermore, VBBr-D4EI could be successfully used for the selective uptake of Pb(II) from wastewater. It was also shown that the novel resins can be regenerated without significant loss of their sorption capacity.     

Azinyl sulfides. L.

The title compound, C₁₉H₁₃N₃S, is folded, with the central ring in a boat conformation. The folding angle between the two quinoline rings is 150.2 (1)°. The 14‐methyl substituent is in a quasi‐axial orientation with respect to the thia­zine ring. The S?N—C_methyl angle is 120.1 (1)°.     

Lipophilicity study of eight cephalosporins by reversed‐phase thin‐layer chromatographic method

The lipophilicity (R_M0) and specific hydrophobic surface area for the representatives of four generation cephalosporins have been determined by reversed‐phase thin‐layer chromatography, and the effect of different mobile‐phase modifiers (such as methanol, acetonitrile, acetone, 1,4‐dioxane and 2‐propanol) on the retention has been studied. The compounds studied showed typical retention behavior; their R_M values decreased linearly with increasing concentration of the organic modifier in the eluent. The linear correlations between the volume fraction of the organic solvent and the R_M values over a limited range were established for each solute, resulting in high values of correlation coefficients (>0.95 in most cases). R_M values were determined by various concentrations of organic modifier, and the correlation obtained was extrapolated to 0% of organic modifier. Chromatographically established logP (R_M0) parameters were compared with computationally calculated partition coefficients values (AClogP, ALOGP, KOWWIN, ALOGPs, XLOGP2, MLOGP and XLOGP3) and experimental octanol–water logP values (measured by the shake flask method). The received results demonstrate that RP‐TLC may be a good alternative technique for analytics in describing the lipophilic nature of investigated cephalosporins as well as the activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparison of photodynamic efficacy of tetraarylporphyrin pegylated or encapsulated in liposomes: In vitro studies

Two photosensitizing systems: (1) tetrakis(4-hydroxyphenyl)porphyrin (p-THPP) encapsulated in sterically stabilized liposomes (SSL) and (2) p-THPP functionalized by covalent attachment of poly(ethylene glycol) (p-THPP–PEG₂₀₀₀) were studied in vitro. The dark and photo cytotoxicity of these systems were evaluated on two cell lines: HCT 116, a human colorectal carcinoma cell line, and DU 145, a prostate cancer cell line and compared with these determined for free p-THPP. It was demonstrated that both encapsulation in liposomes as well as attachment of PEG chain result in pronounced reduction of the dark cytotoxicity of the parent porphyrin. The liposomal formulation showed higher than p-THPP–PEG₂₀₀₀ photocytotoxicity towards both cell lines used in the studies.     

Equilibrium Formation of Stable All‐Silicon Versions of 1,3‐Cyclobutanediyl

Main group analogues of cyclobutane‐1,3‐diyls are fascinating due to their unique reactivity and electronic properties. So far only heteronuclear examples have been isolated. Here we report the isolation and characterization of all‐silicon 1,3‐cyclobutanediyls as stable closed‐shell singlet species from the reversible reactions of cyclotrisilene c‐Si₃Tip₄ (Tip=2,4,6‐triisopropylphenyl) with the N‐heterocyclic silylenes c‐[(CR₂CH₂)(NtBu)₂]Si: (R=H or methyl) with saturated backbones. At elevated temperatures, tetrasilacyclobutenes are obtained from these equilibrium mixtures. The corresponding reaction with the unsaturated N‐heterocyclic silylene c‐(CH)₂(NtBu)₂Si: proceeds directly to the corresponding tetrasilacyclobutene without detection of the assumed 1,3‐cyclobutanediyl intermediate.     

Properties of polyethylene glycol supported tetraarylporphyrin in aqueous solution and its interaction with liposomal membranes

5,10,15,20-Tetrakis(4-hydroxyphenyl)porphyrin was functionalized by covalent attachment of poly(ethylene glycol) (PEG) chains of various molecular weights, 350, 2000, and 5000 Da. The properties of PEG-functionalized tetraarylporphyrins in aqueous solution and their interactions with liposomes have been studied. Electronic absorption spectroscopy, dynamic light scattering, atomic force microscopy, and fluorescence quenching were used to monitor aggregation of porphyrin chromophores and behavior of the attached PEG chains in the aqueous solution. The tendency for aggregation of porphyrin chromophores in aqueous solution and the efficiency of fluorescence quenching by KI decrease with increasing length of PEG chain linked to the porphyrin ring. The experimental results indicate that polymer clusters are present in aqueous solution of all pegylated porphyrins. The interactions between the pegylated porphyrins and phosphatidylcholine liposomes in the aqueous solution were studied using the fluorescence methods. The apparent binding constants of porphyrin chromophores to liposomes were determined. The degree of binding was found to be dependent on the molecular weight of the attached polymer.