Computational analysis of entropy generation in mixed convection flow past a vertical wavy cone

Journal of Thermal Analysis and Calorimetry - The problem of entropy generation in mixed convection flow of incompressible viscous fluid along an isothermal vertical wavy cone is investigated...     

Transverse Transport of Polymeric Nanofluid under Pure Internal Heating: Keller Box Algorithm

The present work aims to investigate transverse Oldroyd-B nanofluid flow on a stretched panel with consideration of internal heat generation. Buongiorno model is utilized to study influence of thermophoresis and Brownian motion effects. A numerical procedure known as Keller box algorithm is used to solve the governed physical model.Graphically velocity, temperature and concentration of nanoparticles are expressed. Also, concerned physical measures such as heat and mass transfer are investigated numerically. The simulations performed revealed that fluid parameters play a significant role in heat transfer under Brownian motion and thermophoresis effects. Local heat flux is elevated while local mass flux is suppressed with enhancing Brownian motion parameter. Streamlines pattern exhibits that flow is more inclined in the presence of Deborah number effects. To the best of our knowledge, transverse flow of an Oldroyd-B type fluid which incorporates the thermal relaxation effects has never been reported before in the presence of Brownian motion and internal heating phenomenon. Therefore we intend to discuss these features in detail. The obtained results are a novel contribution, which can be benchmark for further relevant academic research related to polymer industry.     

Hydroxypropylcellulose-aceclofenac conjugates: high covalent loading design, structure characterization, nano-assemblies and thermal kinetics

This article presents synthesis of novel macromolecular prodrugs of aceclofenac (an anti-inflammatory drug) onto hydroxypropylcellulose (HPC). The HPC-aceclofenac conjugates were prepared using an acylating agent 1,1′-carbonyldiimidazole (CDI) under homogenous reaction conditions. Aceclofenac was first activated by using CDI to form its N-acylimidazole. The N-acylimidazole of aceclofenac was then reacted with HPC polymer at 80 °C for 24 h. Highly pure prodrugs of aceclofenac were synthesized with a wide range of moderate to high degree of substitution (DS 0.41–2.12) as calculated by ¹H NMR spectroscopy. The UV spectroscopic analysis has also revealed that the active drug aceclofenac was found in different conjugates from 28 to 67 mg/100 mg of HPC-aceclofenac conjugates which are in good agreement with DS calculated by ¹H NMR spectroscopy. The gel permeation chromatography showed unimodal absorption that indicates no significant degradation in polymer chains during the reaction. The macromolecular prodrugs of aceclofenac were characterized using different spectroscopic and chromatographic techniques. The thermal analysis has revealed that HPC-aceclofenac conjugates (prodrugs) are 92 and 96 °C more stable than pure aceclofenac regarding their initial (Tdi) and maximum degradation temperatures (Tdm), respectively. The activation energy (Ea) and frequency factor (Z) of the degradation reactions were evaluated using Friedman, Broido and Chang methods. Degradation followed first order (n) kinetics. Transmission electron microscopy has revealed the formation of sponge like nano aggregates with population size distribution of around 80–150 nm.     

Single-degree-of-freedom model of displacement in vortex-induced vibrations

In contrast to the approach of coupling a nonlinear oscillator that represents the lift force with the cylinder’s equation of motion to predict the amplitude of vortex-induced vibrations, we propose and show that the displacement can be directly predicted by a nonlinear oscillator without a need for a force model. The advantages of the latter approach include reducing the number of equations and, subsequently, the number of coefficients to be identified to predict displacements associated with vortex-induced vibrations. The implemented single-equation model is based on phenomenological representation of different components of the transverse force as required to initiate the vibrations and to limit their amplitude. Three different representations for specific flow and cylinder parameters yielding synchronization for Reynolds numbers between 104 and 114 are considered. The method of multiple scales is combined with data from direct numerical simulations to identify the parameters of the proposed models. The variations in these parameters with the Reynolds number, reduced velocity or force coefficient over the synchronization regime are determined. The predicted steady-state amplitudes are validated against those obtained from high-fidelity numerical simulations. The capability of the proposed models in assessing the performance of linear feedback control strategy in reducing the vibrations amplitude is validated with performance as determined from numerical simulations.

     

New flavonol glycosides from the leaves of Caragana brachyantha

Two new flavonol glycosides, brachysides C and D, together with three known flavonol glycosides, were isolated from the leaves of Caragana brachyantha. The structures of brachysides C and D were elucidated on the basis of detailed spectroscopic analysis as quercetin 5-O-[α-l-rhamnopyranosyl-(1 → 6)-β-d-glucopyranoside]-7-O-[α-l-rhamnopyranoside] and quercetin 5-O-[α-l-rhamnopyranosyl-(1 → 6)-β-d-glucopyranoside]-7-O-[α-l-rhamnopyranoside]-4′-O-[α-l-rhamnopyranoside], respectively. The presence of flavonol tetra- and triglycosides bearing a sugar moiety at position 5 was the first report from this genus Caragana.     

First-principle electronic, elastic, and optical study of cubic gallium nitride

The ab initio pseudopotential (PP) method within the generalized gradient approximation (GGA) has been used to investigate the electronic, elastic constants, and optical properties of zinc-blende GaN. An underestimated band gap along with higher DOS and squeezed energy bands around the fermi level is obtained. The d-band effect is briefly discussed for electronic band structure calculations. With the help of elastic constants, acoustic wave speeds are calculated in [100], [110], and [111] planes. The dielectric constant, refractive index, and its pressure coefficient are well illustrated. The effect of hydrostatic pressure is explicated for all these properties. The results of the present study are evaluated with the existing experimental and first-principle calculations.     

Eremosides A – C,New Iridoid Glucosides from Eremostachys loasifolia

Eremosides A–C ( 1 – 3 ), three new iridoid glucosides, were isolated from the AcOEt‐soluble fraction of the EtOH extract of the whole plant of Eremostachys loasifolia, along with buddlejoside B ( 4 ), 10‐O‐benzoylcatalpol ( 5 ), and pakiside A ( 6 ) reported for the first time from this species. The structures of these compounds were elucidated by spectroscopic data including 2D‐NMR, FAB‐MS, ESI‐MS, as well as by acid and basic hydrolyses.     

EPR Study of γ-Irradiated UHMWPE Doped with Vitamin E: Assessment of Thermal Effects on the Organic Radicals During Vitamin E Diffusion

Thermal effects on ultra-high-molecular-weight polyethylene (UHMWPE) residual radicals during the vitamin E diffusion process were studied in detail. Electron paramagnetic resonance (EPR) technique showed a significant reduction in concentrations of radiation-induced primary (alkyl (–CH₂– ^?CH–CH₂–), allyl (–CH₂–^?CH=CH–CH–CH₂–) and polyenyl (–^?CH–[CH=CH–] _m –) with m > 3) radicals for both control and vitamin E-doped samples. The concentrations of radiation-induced primary radicals (RIPRs) were found to decrease proportionally with the heat/diffusion time. While the EPR spectra of the control samples showed only polyethylene (PE) radicals, the spectra of vitamin E-doped samples were found to exhibit vitamin E radicals in addition to PE radicals. Of particular interest, the heat involved during vitamin E diffusion plays a significant role in reducing the radiation-induced primary radicals of UHMWPE. For 120 min of heat/diffusion time, the available quantity of primary radicals in control samples were found to be ~7.5 % of initial radicals. The leftover amounts of these primary radicals for vitamin E-doped samples were approximately ~10.0 %. In addition to this, EPR power saturation techniques were also used to assess the effects of initial heat/diffusion treatment on the oxygen-induced residual radicals (OIRRs): R₁ (–^?CH–[CH=CH–] _m –) with m > 3 and R₂ (^?OCH–[CH=CH–] _m –) with m = 2 or 3. It was found that the concentration of OIRRs also decreases proportionally with initial heat/diffusion time. The remaining amount of OIRRs relative to leftover RIPRs after heat/diffusion was found to be approximately 4.0 % in controls and was still found to be 10.0 % in vitamin E-doped UHMWPE. This may indicate that vitamin E slows down the oxidation processes, which may contribute to the strong oxidation resistance of vitamin E-doped UHMWPE.