Preparation of highly selective solid-phase extractants for Cibacron reactive dyes using molecularly imprinted polymers

Selective polymeric extractants were prepared for preconcentration of Cibacron reactive red dye, a dye that is often applied with Cibacron reactive blue and Cibacron reactive yellow for dyeing of fabrics. The best extractant was fabricated (in chloroform) using methacrylic acid (as monomer), ethylene glycol dimethacrylate (as crosslinker), AIBN (as initiator for polymerization), and red dye as template molecule, with a molar stoichiometric ratio of 8.0:40.0:2.5:0.63, respectively. The structure of the molecularly imprinted polymer (MIP) was robust, and resisted dissolution up to 260 °C. Compared with the un-imprinted polymer, the imprinted product has a large specific surface area which improved its adsorption capacity. The effect of imprinting was obvious from the adsorption capacity measured at pH 4 for red dye (the imprinted molecule), which was increased from 24.0 to 79.3 mg g⁻¹ after imprinting. Equilibrium adsorption studies revealed that the dye-imprinted-polymer enables efficient extraction of red dye even in the presence of blue and yellow dyes which have similar chemical natures to the red dye. The selectivity coefficients S _{red dye/dye}, were 13.9 and 17.1 relative to the yellow and blue dyes, respectively. The MIP was found to be effective for red dye preconcentration, with a preconcentration factor of 100, from tap water and treated textile wastewater. The factors affecting extraction of red dye by the MIP were studied and optimized. Under the optimized extraction conditions, red dye was selectively quantified in the presence of other competing dyes at a concentration of 20 μg L⁻¹ from different water systems with satisfactory recoveries (91–95%) and RSD values (∼5.0%).     

Improving the selectivity of non-polar alkanes, alkenes, and aromatic hydrocarbon compounds by the application of acetonitrile as a Cl reagent

The selective enhancement of membrane introduction mass spectrometry for non-polar alkanes, alkenes, and aromatic hydrocarbon compounds by the application of acetonitrile as a chemical ionization reagent was investigated. Acetonitrile Cl is able to produce specific fragment ions for many of the compounds test and this can be used to identify and quantify the parent neutrals. This method provided relatively high detection limits of the test compounds. This method could potentially be useful for analytical applications such as the detection of non-polar hydrocarbons for environmental studies if CH₃CN Cl/MIMS is coupled with a preconcentration method.     

Anticancer and anti-inflammatory sulfur-containing semisynthetic derivatives of sarcophine

Sarcophine (1), a cembranoid diterpene is known to inhibit the process of tumorigenesis. Sarcophine can be isolated in large amounts from the Red Sea soft coral Sarcophyton glaucum and hence is an ideal target for semisynthetic or biocatalytic modifications. Hydroxylated derivatives of 1 were reported to improve its anticancer activity. Despite the promising results and ready availability, there are limited attempts towards further diversifying the library of sarcophine derivatives. Hence, the current study targets the epoxide ring to generate sulfur-containing derivatives of sarcophine by reacting it with ammonium thiocyanate and Lawesson's reagent. Structure elucidation of the products was based on extensive 1D and 2D NMR and high resolution mass spectrometry, in addition to mechanistic considerations. The effect of these derivatives on highly malignant +SA mammary epithialial cell proliferation is reported. Anti-inflammatory potential of sarcophine and its derivatives is also demonstrated.     

Molecularly Imprinted Nanospheres by Nonaqueous Emulsion Polymerization

The preparation of nanosized, molecularly imprinted polymer particles by nonaqueous emulsion polymerization is presented. Monodisperse cross‐linked polymer nanospheres with a diameter of around 100 nm were synthesized using a standard monomer mixture of methacrylic acid and ethylene dimethacrylate, containing (±)‐propranolol as a template. The rebinding efficiency of the resulting particles was determined by batch rebinding tests and isothermal titration calorimetry (ITC). The results indicate that the proposed imprinting process under nonaqueous conditions lead to particles with an enhanced capacity of template rebinding compared to both nonimprinted ones and to particles obtained by more conventional emulsion polymerization in water.

     

Measurement of radionuclides and absorbed dose rates in soil samples of Peshawar,Pakistan, using gamma ray spectrometry

The analysis of gamma-emitting radionuclides in nature, i.e. ²²⁶Ra, ²³²Th, ⁴⁰K and ¹³⁷Cs, has been carried out in soil samples collected from Peshawar University Campus and surrounding areas using a high purity germanium detector coupled with a computer-based high-resolution multichannel analyser. The activity concentrations in soil ranged from 30.20±0.65 to 61.90±0.95, 50.10±0.54 to 102.80±1.04, 373.60±4.56 to 1082±11.38 and 9.50±0.11 to 46.60±0.42 Bq kg^?1 for ²²⁶Ra, ²³²Th, ⁴⁰K and ¹³⁷Cs, with a mean value of 45±7.70, 67±12.50, 878±180 and 19±9.20 Bq kg^?1, respectively. The radium equivalent activity, internal and external hazard indices have mean values of 203.40±29.40 Bq kg^?1, 0.56 and 0.68, respectively. The mean values of outdoor and indoor absorbed dose rates in air and the annual effective dose equivalents were found to be 106.50 and 128 nGy h^?1 and 0.19 and 0.54 mSv y^?1, respectively. In the present study, ⁴⁰K was the major radionuclide present in soil samples. The presence of ¹³⁷Cs indicates that this area also received some fallout from the nuclear accident of the Chernobyl power plant in 1986. The activity concentrations of radionuclides found in soil samples during the current investigation were nominal. Therefore, they are not associated with any potential source of health hazard to the public.     

Analysis of triacylglycerols and whole oils by matrix-assisted laser desorption/ionization time of flight mass spectrometry

Since the introduction of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry the majority of research has focused on developing analytical methods for the qualitative determination of water soluble biomolecules such as proteins, peptides, carbohydrates, and oligonucleotides. This paper, however, reports the use of MALDI for the analysis of triacylglycerols and develops a new sample preparation method for nonpolar analytes. MALDI enables the rapid analyses of triacylglycerol (TAG) standards and mixtures of whole oils. The new method provides excellent shot to shot reproducibility, making quantification possible. Detection limits were in the mid femtomole range and the resolution was around 2000 which easily separated TAGs differing by one double bond. Sensitivity decreased with increasing molecular weight, causing biased results when analyzing complex mixtures with a significant range of molecular weight. In all cases only sodiated molecules and prompt losses of a fatty acid sodium salt were observed in the spectra. From this information it was possible to identify the three fatty acids on the glycerol backbone. Collision-induced dissociation was carried out on a triacylglycerol which proved to be useful for additional structural information, including the corroboration of the fatty acid components. With MALDI the percent compositions of TAGs in a standard olive oil was accurately determined. Finally, MALDI was used to examine the differences in lipid components between aged and fresh onion seeds, showing the potential of the technique for observing changes in lipid components in seeds.     

Effects of inclined magnetic field on mixed convection in a nanofluid filled double lid-driven cavity with volumetric heat generation or absorption using finite element method

A computational analysis has been performed on mixed convection in a double sided lid-driven cavity in the presence of volumetric heat generation or absorption. Effects of inclined magnetic field are also studied. The governing parameters are solved via Galerkin weighted residual finite element method in space and the Crank–Nicolson in time. Governing parameters are nanoparticle volume fraction (0.0?≤???≤?0.04), Richardson number (0.01?≤?Ri?≤?10), internal heat generation or absorption parameter $(?10\le q\le 10),$ inclination angle of magnetic field (0°?≤?γ?≤?90°) and Hartmann number (0?≤?Ha?≤?100). It is observed that the highest heat transfer is obtained in case of the maximum value of heat absorption. As a further finding, heat transfer decreases with increasing of Hartmann number and increases with increasing of nanoparticle volume fraction.     

Analytical Investigation of Soliton Solutions to Three Quantum Zakharov-Kuznetsov Equations

In the present paper, the two-dimensional quantum Zakharov-Kuznetsov(QZK) equation, three-dimensional quantum Zakharov-Kuznetsov equation and the three-dimensional modified quantum Zakharov-Kuznetsov equation are analytically investigated for exact solutions using the modified extended tanh-expansion based method. A variety of new and important soliton solutions are obtained including the dark soliton solution, singular soliton solution, combined dark-singular soliton solution and many other trigonometric function solutions. The used method is implemented on the Mathematica software for the computations as well as the graphical illustrations.     

Influence of temperature on the electric,dielectric and AC conductivity properties of nano-crystalline zinc substituted cobalt ferrite synthesized by solution combustion technique

Cobalt–zinc nanoferrites with formulae Co $_{1-x}$ Zn $_{x}$ Fe $_{2}$ O $_{4}$ , where x = 0.0, 0.1, 0.2 and 0.3, have been synthesized by solution combustion technique. The variation of DC resistivity with temperature shows the semiconducting behavior of all nanoferrites. The dielectric properties such as dielectric constant ( $\varepsilon $ ’) and dielectric loss tangent (tan $\delta )$ are investigated as a function of temperature and frequency. Dielectric constant and loss tangent are found to be increasing with an increase in temperature while with an increase in frequency both, $\varepsilon $ ’ and tan $\delta $ , are found to be decreasing. The dielectric properties have been explained on the basis of space charge polarization according to Maxwell–Wagner’s two-layer model and the hopping of charge between Fe $^{2+}$ and Fe $^{3+}$ . Further, a very high value of dielectric constant and a low value of tan $\delta $ are the prime achievements of the present work. The AC electrical conductivity ( $\sigma _\mathrm{AC})$ is studied as a function of temperature as well as frequency and $\sigma _\mathrm{AC}$ is observed to be increasing with the increase in temperature and frequency.