3,3′‐Seleno­bis­(propionic acid)

In contrast to Se[CH₂C(O)OH]₂versus S[CH₂C(O)OH]₂, the title compound, Se[CH₂CH₂C(O)OH]₂ or C₆H₁₀O₄Se, is structurally quite similar to its sulfur analogue. The mol­ecule has twofold symmetry. The C—Se—C bond angle is 96.48 (8)° and the Se—C bond lengths are 1.9610 (14) Å. The shortest Se?O intermolecular distance is 3.5410 (11) Å. The O?O distances in the carboxyl­ic acid dimers are 2.684 (2) Å. The temperature dependence of the IR spectrum suggests tautomerism in the solid state.     

Artificial pozzolanic cement pastes containing burnt clay with and without silica fume

Pozzolanic cement blends were prepared by the partial substitution of ordinary Portland cement (OPC) with different percentages of burnt clay (BC), Libyan clay fired at 700 °C, of 10, 20, and 30%. The pastes were made using an initial water/solid ratio of 0.30 by mass of each cement blend and hydrated for 1, 3, 7, 28, and 90 days. The pozzolanic OPC–BC blend containing 30% BC was also admixed with 2.5 and 5% silica fume (SF) to improve the physicomechanical characteristics. The hardened pozzolanic cement pastes were subjected to compressive strength and hydration kinetics tests. The results of compressive strength indicated slightly higher values for the paste made of OPC–BC blend containing 10% BC The results of DSC and XRD studies indicated the formation and later the stabilization of calcium silicates hydrates (CSH) and calcium aluminosilicate hydrates (C₃ASH₄ and C₂ASH₈) as the main hydration products in addition to free calcium hydroxide (CH). Scanning electron microscopic (SEM) examination revealed that the pozzolanic cement pastes made of OPC–BC mixes possesses a denser structure than that of the neat OPC paste. Furthermore, the addition of SF resulted in a further densification of the microstructure of the hardened OPC–BC–SF pastes; this was reflected on the observed improvement in the compressive strength values at all ages of hydration.     

Bismuth silicate glass as host media for some selected rare-earth ions and effects of gamma irradiation

Ultraviolet, visible and infrared spectral measurements were used to investigate prepared undoped and rare-earth doped (2.5%) bismuth silicate glasses (80% Bi₂O₃–20%SiO₂) before and after being subjected to gamma irradiation (8?Mrad). The base bismuth silicate glass reveals strong extended UV–near visible absorption bands which are attributed to the presence of trace iron impurities in the raw materials together with absorption due to sharing of Bi³⁺ ions. The RE-doped samples show the same strong UV–near visible bands as the undoped glasses beside extra narrow characteristic bands mostly in the visible and near-infrared regions due to the respective studied rare-earth ions. The base undoped and all RE-doped samples except CeO₂ sample reveal quite resistance to the effect of gamma irradiation due to heavy atomic mass Bi³⁺ ions present in high content (80%) and the rare-earth ions are known to be weakly affected due to the known 5s, 5p shielding. The exceptional effect of CeO₂-doped sample is related to the ability of Ce³⁺ ions to change its oxidation state through photochemical reaction by irradiation or exchange with Fe³⁺ present as trace iron impurities. The FT infrared spectra of the prepared glasses reveal characteristic absorption bands which are related to the silicate groups together with the sharing of vibrational modes due to Bi–O groups. The IR spectra are slightly affected by gamma irradiation indicating the stability of the structural network groups consisting of SiO₄ and BiO₆ units.     

The Effect of Wall Material Type on the Encapsulation Efficiency and Oxidative Stability of Fish Oils

Fish oil is the primary source of long-chain omega-3 fatty acids, which are important nutrients that assist in the prevention and treatment of heart disease and have many health benefits. It also contains vitamins that are lipid-soluble, such as vitamins A and D. This work aimed to determine how the wall material composition influenced the encapsulation efficiency and oxidative stability of omega fish oils in spray-dried microcapsules. In this study, mackerel, sardine waste oil, and sand smelt fish oil were encapsulated in three different wall materials (whey protein, gum Arabic (AG), and maltodextrin) by conventional spray-drying. The effect of the different wall materials on the encapsulation efficiency (EE), flowability, and oxidative stability of encapsulated oils during storage at 4 °C was investigated. All three encapsulating agents provided a highly protective effect against the oxidative deterioration of the encapsulated oils. Whey protein was found to be the most effective encapsulated agent comparing to gum Arabic and maltodextrin. The results indicated that whey protein recorded the highest encapsulation efficiency compared to the gum Arabic and maltodextrin in all encapsulated samples with EE of 71.71%, 68.61%, and 64.71% for sand smelt, mackerel, and sardine oil, respectively. Unencapsulated fish oil samples (control) recorded peroxide values (PV) of 33.19, 40.64, and 47.76 meq/kg oil for sand smelt, mackerel, and sardine oils after 35 days of storage, while all the encapsulated samples showed PV less than 10 in the same storage period. It could be concluded that all the encapsulating agents provided a protective effect to the encapsulated fish oil and elongated the shelf life of it comparing to the untreated oil sample (control). The results suggest that encapsulation of fish oil is beneficial for its oxidative stability and its uses in the production of functional foods.     

Two- and three-dimensional comparative study of heat transfer and pressure drop characteristics of nanofluids flow through a ventilated cubic cavity (part I: Newtonian nanofluids)

Journal of Thermal Analysis and Calorimetry - Through this paper, three-dimensional fluid flow and heat transfer of Al2O3 nanofluid within ventilated enclosures was taken into consideration....     

Proposed Mechanism for the Antitrypanosomal Activity of Quercetin and Myricetin Isolated from Hypericum afrum Lam.: Phytochemistry,In Vitro Testing and Modeling Studies

The in vitro activity of L. donovani (promastigotes, axenic amastigotes and intracellular amastigotes in THP1 cells) and T. brucei, from the fractions obtained from the hydroalcoholic extract of the aerial part of Hypericum afrum and the isolated compounds, has been evaluated. The chloroform, ethyl acetate and n-butanol extracts showed significant antitrypanosomal activity towards T. brucei, with IC₅₀ values of 12.35, 13.53 and 12.93 µg/mL and with IC₉₀ values of 14.94, 19.31 and 18.67 µg/mL, respectively. The phytochemical investigation of the fractions led to the isolation and identification of quercetin (1), myricitrin (2), biapigenin (3), myricetin (4), hyperoside (5), myricetin-3-O-β-d-galactopyranoside (6) and myricetin-3’-O-β-d-glucopyranoside (7). Myricetin-3’-O-β-d-glucopyranoside (7) has been isolated for the first time from this genus. The chemical structures were elucidated by using comprehensive one- and two-dimensional nuclear magnetic resonance (1D and 2D NMR) spectroscopic data, as well as high-resolution electrospray ionization mass spectrometry (HR-ESI–MS). These compounds have also been evaluated for their antiprotozoal activity. Quercetin (1) and myricetin (4) showed noteworthy activity against T. brucei, with IC₅₀ and IC₉₀ values of 7.52 and 5.71 µM, and 9.76 and 7.97 µM, respectively. The T. brucei hexokinase (TbHK1) enzyme was further explored as a potential target of quercetin and myricetin, using molecular modeling studies. This proposed mechanism assists in the exploration of new candidates for novel antitrypanosomal drugs.     

Surface Polymers on Multiwalled Carbon Nanotubes for Selective Extraction and Electrochemical Determination of Rhodamine B in Food Samples

In this study, we combine magnetic solid phase extraction (MSPE), with the screen-printed carbon electrode (SPCE) modified by a molecular imprinted polymer (MIP) for sensitive and selective extraction and electrochemical determination of Rhodamine B in food samples. A magnetic solid phase extraction (MSPE) was carried out using magnetic poly(styrene-co-divinylbenzene) (PS-DVB) and magnetic nanoparticles (MNPs) synthetized on the surface of multiwalled carbon nanotubes (MWCNTs). An MIP was prepared on the surface of MWCNTs in the presence of titanium oxide nanoparticles (TiO₂NPs) modifying the SPCE for the rapid electrochemical detection of Rhodamine B. The MIPs synthesis was optimized by varying the activated titanium oxide (TiO₂) and multiwalled carbon nanotubes (MWCNTs) amounts. The MSPE and electrochemical detection conditions were optimized as well. The present method exhibited good selectivity, high sensitivity, and good reproducibility towards the determination of Rhodamine B, making it a suitable method for the determination of Rhodamine B in food samples.     

Design,Synthesis, Biological Evaluation and In Silico Study of Benzyloxybenzaldehyde Derivatives as Selective ALDH1A3 Inhibitors

Aldehyde dehydrogenase 1A3 (ALDH1A3) has recently gained attention from researchers in the cancer field. Several studies have reported ALDH1A3 overexpression in different cancer types, which has been found to correlate with poor treatment recovery. Therefore, finding selective inhibitors against ALDH1A3 could result in new treatment options for cancer treatment. In this study, ALDH1A3-selective candidates were designed based on the physiological substrate resemblance, synthesized and investigated for ALDH1A1, ALDH1A3 and ALDH3A1 selectivity and cytotoxicity using ALDH-positive A549 and ALDH-negative H1299 cells. Two compounds (ABMM-15 and ABMM-16), with a benzyloxybenzaldehyde scaffold, were found to be the most potent and selective inhibitors for ALDH1A3, with IC₅₀ values of 0.23 and 1.29 µM, respectively. The results also show no significant cytotoxicity for ABMM-15 and ABMM-16 on either cell line. However, a few other candidates (ABMM-6, ABMM-24, ABMM-32) showed considerable cytotoxicity on H1299 cells, when compared to A549 cells, with IC₅₀ values of 14.0, 13.7 and 13.0 µM, respectively. The computational study supported the experimental results and suggested a good binding for ABMM-15 and ABMM-16 to the ALDH1A3 isoform. From the obtained results, it can be concluded that benzyloxybenzaldehyde might be considered a promising scaffold for further drug discovery aimed at exploiting ALDH1A3 for therapeutic intervention.     

A ‘One-Pot’ Anellation Method for the Transformation of Heptalene-4,5-dicarboxylates into Benzo[a]heptalenes

It has been found that dimethyl heptalene-4,5-dicarboxylates, when treated with 4 mol-equiv. of lithiated N,N-dialkylamino methyl sulfones or methyl phenyl sulfone, followed by 4 mol-equiv. of BuLi in THF in the temperature range of ?78 to 20°, give rise to the formation of 3-[(N,N-dialkylamino)sulfonyl]- or 3-(phenylsul-fonyl)benzo[a]heptalene-2,4-diols of. (cf. Scheme 4, and Tables 2 and 3). Accompanying products are 2,4-bis{[(N,N-dialkylamino)sulfonyl]methyl}- or 2,4-bis[(phenylsulfonyl)methyl]-4,10a-dihydro-3H-heptaleno[1,10-bc]furan-3-carboxylates as mixtures of diastereoisomers of. cf. Scheme 4, and (Tables 2 and 3) which are the result of a Michael addition reaction of the lithiated methyl sulfones at C(3) of the heptalene-4,5-dicarboxylates, followed by (sulfonyl)methylation of the methoxycarbonyl group at C(5) and cyclization of. (cf. Scheme 5). It is assumed that the benzo[a]heptalene formation is due to (sulfonyl)methylation of both methoxycarbonyl groups of the heptalene-4,5-dicarboxylates of. (cf. Schemes 6 and 8). The resulting bis-enolates 35 are deprotonated further. The thus formed tris-anions 36 can then cyclize to corresponding tris-anions 37 of cyclopenta[d]heptalenes which, after loss of N,N-dialkylamido sulfite or phenyl sulfinate, undergo a ring-enlargement reaction by 1,2-C migration finally leading to the observed benzo[a]heptalenes of. (cf. Schemes 8 and 9). The structures of the new product types have been finally established by X-ray crystal-structure analyses (cf. Figs. 1 and 2 as well as Exper. Part).