Thermally stable polymer composites with improved transparency by using colloidal mesoporous silica nanoparticles as inorganic fillers

The colloidal mesoporous silica nanoparticles with small particle sizes (namely, CMS) are used as inorganic fillers of polymers (i.e. epoxy and silicone). From simple calculation, almost all polymers are estimated to be confined in the mesopores. To clarify the superiority of CMS over nonporous silica particles and mesoporous silica particles with much larger size (TMPS-4) as inorganic fillers, a systematic study on mechanical strength and transparency of polymer-silica nanocomposites was conducted. Compared with nonporous silica particles, similar to TMPS-4, CMS shows a greater effect on lowering the CTE. In addition, obtained polymer-CMS nanocomposites show improved transparency than polymer-TMPS-4 nanocomposites.     

In situ infrared spectroscopic study of brucite carbonation in dry to water-saturated supercritical carbon dioxide

In geologic carbon sequestration, whereas part of the injected carbon dioxide will dissolve into host brine, some will remain as neat to water saturated supercritical CO(2) (scCO(2)) near the well bore and at the caprock, especially in the short term life cycle of the sequestration site. Little is known about the reactivity of minerals with scCO(2) containing variable concentrations of water. In this study, we used high-pressure infrared spectroscopy to examine the carbonation of brucite (Mg(OH)(2)) in situ over a 24 h reaction period with scCO(2) containing water concentrations between 0% and 100% saturation, at temperatures of 35, 50, and 70 °C, and at a pressure of 100 bar. Little or no detectable carbonation was observed when brucite was reacted with neat scCO(2). Higher water concentrations and higher temperatures led to greater brucite carbonation rates and larger extents of conversion to magnesium carbonate products. The only observed carbonation product at 35 °C was nesquehonite (MgCO(3)·3H(2)O). Mixtures of nesquehonite and magnesite (MgCO(3)) were detected at 50 °C, but magnesite was more prevalent with increasing water concentration. Both an amorphous hydrated magnesium carbonate solid and magnesite were detected at 70 °C, but magnesite predominated with increasing water concentration. The identity of the magnesium carbonate products appears strongly linked to magnesium water exchange kinetics through temperature and water availability effects.     

In situ molecular spectroscopic evidence for CO2 intercalation into montmorillonite in supercritical carbon dioxide

The interaction of anhydrous supercritical CO(2) (scCO(2)) with both kaolinite and ~1W (i.e., close to but less than one layer of hydration) calcium-saturated montmorillonite was investigated under conditions relevant to geologic carbon sequestration (50 °C and 90 bar). The CO(2) molecular environment was probed in situ using a combination of three novel high-pressure techniques: X-ray diffraction, magic angle spinning nuclear magnetic resonance spectroscopy, and attenuated total reflection infrared spectroscopy. We report the first direct evidence that the expansion of montmorillonite under scCO(2) conditions is due to CO(2) migration into the interlayer. Intercalated CO(2) molecules are rotationally constrained and do not appear to react with waters to form bicarbonate or carbonic acid. In contrast, CO(2) does not intercalate into kaolinite. The findings show that predicting the seal integrity of caprock will have complex dependence on clay mineralogy and hydration state.     

Size controlled growth of germanium nanorods and nanowires by solution pyrolysis directly on a substrate

Herein, we describe the controlled growth of 1 dimensional germanium nanostructures from high aspect ratio nanowires (>10 microns in length) to shorter aspect nanorods (100 nm in length) via a simple pyrolysis method. The synthetic route involves the thermal decomposition of selected germanium precursors by dropping a solution in a high boiling point solvent directly onto a pre-heated Si wafer in the presence of a copper source under inert conditions.     

Synthesis of α-hydroxyacetophenones

A general method for the preparation of α-hydroxyacetophenones is presented. Functionalized arylmagnesium species are transmetalated to the corresponding arylzinc intermediates, which undergo Cu(I)-catalyzed reaction with acetoxyacetyl chloride. Acidic hydrolysis of the acetate group releases the target α-hydroxyacetophenones with minimal production of undesired polymeric degradates that are often observed under alternative conditions.     

Photoelectron spectra and structures of three cyclic dipeptides: PhePhe, TyrPro, and HisGly

We have investigated the electronic structure of three cyclic dipeptides: cyclo(Histidyl-Glycyl) (cHisGly), cyclo(Tyrosyl-Prolyl) (cTyrPro), and cyclo(Phenylalanyl-Phenylalanyl) (cPhePhe) in the vapor phase, by means of photoemission spectroscopy and theoretical modeling. The last compound was evaporated from the solid linear dipeptide, but cyclised, losing water to form cPhePhe in the gas phase. The results are compared with our previous studies of three other cyclopeptides. Experimental valence and core level spectra have been interpreted in the light of calculations to identify the basic chemical properties associated with the central diketopiperazine ring, and with the additional functional groups. The valence spectra are generally characterized by a restricted set of outer valence orbitals separated by a gap from most other valence orbitals. The theoretically simulated core and valence spectra of all three cyclic dipeptides agree reasonably well with the experimental spectra. The central ring and the side chains act as independent chromophores whose spectra do not influence one another, except for prolyl dipeptides, where the pyrrole ring is fused with the central ring. In this case, significant changes in the valence and core level spectra were observed, and explained by stronger hybridization of the valence orbitals.     

Rapid discovery of potent siRNA-containing lipid nanoparticles enabled by controlled microfluidic formulation

The discovery of potent new materials for in vivo delivery of nucleic acids depends upon successful formulation of the active molecules into a dosage form suitable for the physiological environment. Because of the inefficiencies of current formulation methods, materials are usually first evaluated for in vitro delivery efficacy as simple ionic complexes with the nucleic acids (lipoplexes). The predictive value of such assays, however, has never been systematically studied. Here, for the first time, by developing a microfluidic method that allowed the rapid preparation of high-quality siRNA-containing lipid nanoparticles (LNPs) for a large number of materials, we have shown that gene silencing assays employing lipoplexes result in a high rate of false negatives (~90%) that can largely be avoided through formulation. Seven novel materials with in vivo gene silencing potencies of >90% at a dose of 1.0 mg/kg in mice were discovered. This method will facilitate the discovery of next-generation reagents for LNP-mediated nucleic acid delivery.     

Mechanisms of intrinsic bioremediation of gas condensate hydrocarbons in saturated soil

Applied Biochemistry and Biotechnology - The addition of gas condensate hydrocarbons to saturated soil from a gas production site stimulated sulfate reduction under anaerobic and oxygen-limiting...     

Syntheses and Structures of Two New Cu/Nb/pyrazine Complexes: Three dimensional CuNb(pyz)2OF5 · (pyz)(H2O) and two dimensional [Cu(pyz)2.5]+ [NbF6]− · (pyz)

Crystals of CuNb(pyz)₂OF₅ · (pyz)(H₂O) ( 1 ) and [Cu(pyz)_2.5]⁺ [NbF₆]^? · (pyz) ( 2 ) were grown (150°C and autogeneous pressures) from CuO, 1/2(Nb₂O₅), (HF)_x · pyridine, and H₂O in excess pyrazine. Light blue single crystals of ( 1 ) are orthorhombic, crystallizing in space group Cccm (No. 66), with a = 14.547(1) Å, b = 16.135(2) Å, c = 13.803(2) Å, and Z = 8. The structure of ( 1 ) contains corner shared [Cu(pyz)_4/2F_2/2]⁺, [Cu(pyz)_4/2O_2/2], and [NbF₄O_1/2F_1/2]^?0.5 octahedra. Orange crystals of ( 2 ) are monoclinic, crystallizing in space group C2/c (No. 15), with a = 11.792(8) Å, b = 17.123(3) Å, c = 17.051(5) Å, β = 90.04(4)°, and Z = 8. The structure of ( 2 ) contains puckered rings of corner shared [Cu(pyz)(pyz)_3/2]⁺ tetrahedra and isolated [NbF₆]^? anions within the rings.