Palladium-indium iodide-mediated allylation and propargylation of glyoxylic oxime ether and hydrazone: the role of water in directing the diastereoselective allylation

Allylation and propargylation of glyoxylic oxime ether in the presence of a catalytic amount of palladium(0) complex and indium(I) iodide were studied. Excellent diastereoselectivities in allylation were achieved in the presence of water, although low diastereoselectivities were observed in the absence of water. Propargylation of glyoxylic oxime ether proceeded with good diastereoselectivities in the presence of LiBr or LiCl.     

Beam-polarization asymmetries for the p(gamma-->, K+)Lambda and p(gamma-->, K+)Sigma(0) reactions for E(gamma)=1.5-2.4 GeV

Beam polarization asymmetries for the p(gamma-->,K+)Lambda and p(gamma-->,K+)Sigma(0) reactions are measured for the first time for E(gamma)=1.5-2.4 GeV and 0.6相似文献   

Direct micropatterning of high dielectric BaTiO3 films by laser-induced pyrolysis with a nano-crystalline seeding technique

A direct patterning method of dielectric BaTiO₃ (BT) films is proposed, which applies laser-induced pyrolysis in combination with nano-crystalline seeding technique. A precursor solution of a BT complex alkoxide containing BT nano-crystalline particles with polyvinylpyrollidone (PVP) as dispersion stabilizer was spin-coated on Pt substrate. An Ar⁺ laser beam was focused and scanned on spin-coated BT films, which induced pyrolysis and crystallization of the films with spatial selectivity. Micropatterns were obtained by striping laser-unirradiated regions on the films with HCl aqueous solution. Raman spectra of the micropattern confirmed that the structures were tetragonal crystalline BT. Clear micropatterns with a line width of ca. 3 μm and an interval of 5 μm were formed at PVP concentrations of 25 and 50 kg/m³. The dielectric constant and dissipation factor of the film fabricated at a laser energy density of 27 MW/cm² and a scanning speed of 25 μm/s attained 76.2 and 0.07, respectively, for a measurement frequency of 100 kHz.     

A first high enantiocontrol of an asymmetric tertiary carbon center attached with a fluoroalkyl group via Rh(I)-catalyzed conjugate addition reaction

Treatment of fluoroalkylated electron-deficient olefins with various boronic acids in the presence of a catalytic amount of Rh(I) coordinated with (S)-BINAP in toluene/H₂O at the reflux temperature for 3 h gave the corresponding conjugate addition products with high enantioselectivity in high yields.     

Surface diffusion in reversed-phase liquid chromatography

More than 40 years ago, Giddings pointed out in “Dynamics of Chromatography” that surface diffusion should become an important research topic in the kinetics of chromatographic phenomena. However, few studies on surface diffusion in adsorbents used in chromatography were published since then. Most scientists use ordinary rate equations to study mass transfer kinetics in chromatography. They take no account of surface diffusion and overlook the significant contributions of this mass transfer process to chromatographic behavior and to column efficiency at high mobile phase flow rate. Only recently did the significance of surface diffusion in separation processes begin to be recognized in connection with the development of new techniques of fast flow, high efficiency chromatography. In this review, we revisit the reports on experimental data on surface diffusion and introduce a surface-restricted molecular diffusion model, derived as a first approximation for the mechanism of surface diffusion, on the basis of the absolute rate theory. We also explain how this model accounts for many intrinsic characteristics of surface diffusion that cannot properly be explained by the conventional models of surface diffusion.     

Quantum yield for hydrogen atom formation from H2O2 photolysis in the range 193–240 nm

Photodissociation processes of H₂O₂ in the range 193–240 nm have been studied by pulsed laser photolysis and laser‐induced fluorescence detection of H atom fragments at 121.56 nm. The quantum yield values for H atom formation at 295 ± 2 K have been determined to be 0.20 ± 0.03, 0.038 ± 0.008, 0.029 ± 0.003, 0.015 ± 0.006, 0.007 ± 0.002 at 193, 207, 210, 220, and 230 nm, respectively. At 240 nm, only the upper limit value of <0.002 has been obtained. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 751–754, 2005     

Moment equations for chromatography using superficially porous spherical particles

New moment equations were developed for chromatography using superficially porous (shell-type) spherical particles, which have recently attracted much attention as one of separation media for fast separation with high efficiency. At first, the moment equations of the first absolute and second central moments in the real time domain were derived from the analytical solution in the Laplace domain of a set of basic equations of the general rate model of chromatography, which represent the mass balance, mass-transfer rate, and reaction kinetics in the column packed with shell-type particles. Then, the moment equations were used for analyzing the experimental data of chromatography of kallidin in a Halo column, which were published in a previous paper written by other researchers. It was tried to predict the chromatographic behavior of shell-type particles having different shell thicknesses. The new moment equations are useful for a detailed analysis of the chromatographic behavior of shell-type spherical particles. It is also concluded that they can be used for the preliminarily optimization of their structural characteristics.     

Estimation of molecular diffusivity in aqueous solution of acetonitrile by the Wilke-Chang equation

It was tried to estimate the molecular diffusivity (D(m)) of solutes in the mixtures of acetonitrile (ACN) and water by the Wilke-Chang equation. Although the information about association coefficient (α) is necessary for the calculation, it has never been proposed for ACN. The value of α was estimated as 1.37 from D(m) of benzene in ACN at 303 K experimentally measured by the peak parking method. The values of α, i.e. 2.6, 1.9, 1.5, and 1.0, which have respectively been proposed for four solvents, i.e. water, methanol, ethanol, and benzene, were correlated with two physico-chemical parameters of the solvents, i.e. solubility parameter and E(T) value. The α value for ACN was plotted around the two correlations, indicating its appropriateness. The values of D(m) calculated by the Wilke-Chang equation using the α value for ACN were compared with those measured by the peak parking method and the Aris-Taylor method in aqueous solutions of ACN. The mean square deviation of the estimation of D(m) was calculated as 8.8 and 14%. It was demonstrated that the Wilke-Chang equation can be used for estimating D(m) with a reasonable accuracy in the mixtures consisting of ACN and water.     

Use of the MALDI BioTyper system with MALDI–TOF mass spectrometry for rapid identification of microorganisms

In a clinical diagnosis microbiology laboratory, the current method of identifying bacterial isolates is based mainly on phenotypic characteristics, for example growth pattern on different media, colony morphology, Gram stain, and various biochemical reactions. These techniques collectively enable great accuracy in identifying most bacterial isolates, but are costly and time-consuming. In our clinical microbiology laboratory, we prospectively assessed the ability of matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI–TOF MS) to identify bacterial strains that were routinely isolated from clinical samples. Bacterial colonies obtained from a total of 468 strains of 92 bacterial species isolated at the Department of Clinical Laboratory at Chiba University were directly placed on target MALDI plates followed by addition of CHCA matrix solution. The plates were then subjected to MALDI–TOF MS measurement and the microorganisms were identified by pattern matching with the libraries in the BioTyper 2.0 software. Identification success at the species and genus levels was 91.7% (429/468) and 97.0% (454/468), respectively. MALDI–TOF MS is a rapid, simple, and high-throughput proteomic technique for identification of a variety of bacterial species. Because colony-to-colony differences and effects of culture duration on the results are minimal, it can be implemented in a conventional laboratory setting. Although for some pathogens, preanalytical processes should be refined, and the current database should be improved to obtain more accurate results, the MALDI–TOF MS based method performs, in general, as well as conventional methods and is a promising technology in clinical laboratories.