Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

Shape recognition of alkylammonium ions by 1,3-bridged calix[5]arene crown-6 ethers: endo- vs exo-cavity complexation

A series of tri-O-substituted 1,3-bridged calix[5]arene crown-6 ethers bearing alkyl, arylalkyl, alkoxyalkyl, and alkoxycarbonylmethyl residues at the lower rim and either (t)()Bu or H substituents at the upper rim have been synthesized. (1)H NMR studies have shown that p-tert-butylcalix[5]crowns, irrespective of the size and nature of their lower rim pendant groups, adopt preorganized conelike conformations, whereas p-H-calix[5]crowns with bulky substituents preferentially exist in solution as partial cone conformers (C(1) symmetry). Calix[5]crown derivatives behave as mono- or ditopic receptors for isomeric butylammonium ions, forming endo-cavity (inside the calixarene cup) and/or exo-cavity (at the crown ether moiety) 1:1 complexes according to the shape of the guest. These two binding modes can be clearly distinguished and monitored by (1)H NMR titration experiments.     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Synthesis and aggregation behavior of <Emphasis Type="Italic">N</Emphasis>-succinyl-o-carboxymethylchitosan in aqueous solutions

A simple and novel method was developed to successfully synthesize N-succinyl-O-carboxymethylchitosan (NSOCMCS) using N-acylation of chitosan with succinic anhydride. The NSOCMCS structure was characterized by Fourier transform infrared and ¹H nuclear magnetic resonance. The aggregation behaviors of NSOCMCS were studied using fluorescence spectroscopy, dynamic light scattering, and atomic force microscopy techniques. The critical aggregation concentration of NSOCMCS in water was determined to be 0.2–0.3 mg/ml. The apparent hydrodynamic radium of an NSOCMCS aggregate was dependent on the concentration. The aggregates demonstrated a much swollen association conformation in aqueous solution. The possible aggregation mechanisms for the NSOCMCS in water are discussed. Moreover, a driving force to form an open aggregation morphology was revealed in this study. Aggregation behaviors are important physicochemical properties of NSOCMCS, which impact the potential application in the biomedical field.     

Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements,prepared by sol-gel route

Structural characteristics of pure silica gel (silica-xerogel, SiO₂) and silica gel doped with some rare earth elements (REEs) such as, praseodymium Pr³⁺, and Europium Eu³⁺, Erbium Er³⁺ and Holmium Ho³⁺ ions, with different concentrations ranging from 1 up to 6%, in the form of monolith materials were prepared by sol-gel technique, Using tetra-ethoxysilane as precursor materials, which are of particular interest for sol-gel integrated optics applications. Some structural features of sol-gel derived monolith are analyzed, namely the structure of nano-particle momolith samples, based on X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR). We show that the XRD spectra of α-crystobalite are obtained for the pure samples at 1100°C and even by doping with the four REEs ions.     

Linking Chiral Clusters with Molybdate Building Blocks: From Homochiral Helical Supramolecular Arrays to Coordination Helices

The synthesis of four new oxo‐centered Fe clusters ( 1 a – c , 2 ) of the form [Fe^III₃(μ₃‐O)(CH₂=CHCOO)₆] with acrylate as the bridging ligand gives rise to potentially intrinsically chiral oxo‐centered {M₃} trimers that show a tendency to spontaneously resolve upon crystallization. For instance, 1 a , [Fe^III₃(μ₃‐O)(CH₂=CHCOO)₆‐(H₂O)₃]⁺, crystallizes in the chiral space group P3₁ as a chloride salt. Crystallization of 1 b , [Fe₃(μ₃‐O)(C₂H₃CO₂)₆(H₂O)₃]NO₃?4.5H₂O, from aqueous solution followed by recrystallization from acetonitrile also gives rise to spontaneous resolution to yield the homochiral salt [Fe₃(μ₃‐O)(C₂H₃CO₂)₆‐(H₂O)₃]NO₃?CH₃CN of 1 c (space group P2₁2₁2₁). Furthermore, the reaction of 1 a with hexamolybdate in acetonitrile gives the helical coordination polymer {[(Fe₃(μ₃‐O)L₆(H₂O))(MoO₄)‐(Fe₃(μ₃‐O)L₆(H₂O)₂)]?2CH₃CN?H₂O}_∞ 2 (L: H₂C?CHCOO), which crystallizes in the space group P2₁. The nature of the ligand geometry allows the formation of atropisomers in both the discrete ( 1 a – c ) and linked {Fe₃} clusters ( 2 ), which is described along with a magnetic analysis of 1 a and 2 .