A software counting loss correction method for neutron activation analysis with short-lived radionuclides

A method has been developed for the correction of counting losses in NAA for the case of a mixture of short-lived radionuclides. It is applicable to systems with Ge detectors and Wilkinson or successive approximation ADC's and will correct losses from pulse pileup and ADC dead time up to 90%. The losses are modeled as a constant plus time-dependent terms expressed as a fourth order polynomial function of the count rates of the short-lived radionuclides. The correction factors are calculated iteratively using the peak areas of the short-lived radionuclides in the spectrum and the average losses as given by the difference between the live time and true time clocks of the MCA. To calibrate the system a measurement is performed for each short-lived nuclide. In a test where the dead time varied from 70% at the start of the measurement to 13% at the end, the measured activities were corrected with an accuracy of 1%.     

Recent advances in the activation of boron and silicon reagents for stereocontrolled allylation reactions

Despite the popularity of boron and silicon allylation reagents in stereocontrolled synthesis, they suffer from a number of inherent limitations that have slowed down their development as synthetic tools for nucleophilic additions to carbonyl compounds and imine derivatives. These limitations are the low reactivity and diastereoselectivity of allyl trialkylsilane reagents, and the lack of catalytic systems for the activation and substoichiometric control of enantioselectivity in the additions of allyl boron reagents. To develop more efficient and general methods for the control of absolute stereochemistry in the resulting homoallylic alcohols, new approaches aimed at solving the problem of activation of allylic boron and silicon reagents are needed. This Minireview describes a number of recent approaches that have been devised to address this problem.     

Bifurcated, modular syntheses of chiral annulet triazacyclononanes

Three chiral 2,6-disubstituted tri-N-methyl azamacrocycles have been prepared by modular methods. These macrocycles were accessed from three chiral 1,4,7-triazaheptanes intermediates that were prepared by two independent routes. The first of these routes involved the benzylamine opening of chiral tosyl aziridines followed by debenzylation but was problematic on solubility grounds. A second, more effective, route was developed which avoided debenzylation by using ammonia in the nucleophilic opening of chiral tosyl aziridines.     

Nitrofuran antibiotic residues in pork: The FoodBRAND retail survey

Use of nitrofuran drugs in food-producing animals has been prohibited within the EU because they may represent a public health risk. Monitoring compliance with the ban has focused on the detection of protein-bound nitrofuran metabolites which, in contrast to the parent compounds, are stable and persist in animal tissues. As part of the “FoodBRAND” project, an extensive survey of pork was undertaken across 15 European countries. Samples (n = 1500) purchased at retail outlets were analysed for the nitrofuran metabolites AOZ, AMOZ, AHD and SEM using LC–MS/MS determination of nitrobenzaldehyde derivatives. Limits of quantification for the method were 0.1 μg/kg (AOZ, AMOZ), 0.2 μg/kg (SEM) and 0.5 μg/kg (AHD). Of the 1500 samples tested, measurable residues of nitrofuran metabolites were confirmed in 12 samples (0.8% incidence overall) of which 10 samples were purchased in Portugal (AOZ, 0.3 μg/kg; AMOZ, 0.2–0.6 μg/kg) and one sample each in Italy (AMOZ, 1.0 μg/kg) and Greece (AOZ, 3.0 μg/kg).     

Metallaborane reaction chemistry. A facile and reversible dioxygen capture by a B-frame-supported bimetallic: structure of [(PMe2Ph)4(O2)Pt2B10H10

[(PMe2Ph)4Pt2B10H10] reversibly takes up atmospheric dioxygen to give the fluxional dioxygen-dimetallaborane complex [(PMe2Ph)4(O2)Pt2B10H10], which has Pt-Pt 2.7143(3), Pt-O 2.141(4) and 2.151(4) and O-O 1.434(6)A.     

Organoruthenaborane Chemistry. X. The SM2-catalysed formation of [ l-(η6-C6Me6)-isocloso-RuB9H9], and some B-phenylamino derivatives. NMR and X-ray diffraction studies

The action of SMe₂ on the ten-vertex nido-ruthenaborane [6-(η⁶-C₆Me₆)RuB₉H_l3] ( 1 ) provides a high-yield route to the unsubstituted isocloso-ruthenaborane [1-(η⁶-C₆Me₆)RuB₉H₉] (2). The benzene analogue [1-(η⁶-C₆Me₆)RuB₉H₉] is prepared similarly. By contrast, reaction of (1) with PhNH₂ gives a variety of B-phenylamino isocloso derivatives, including orange crystals of [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB 9 H₈] ( 3 ), red-orange [1-(η⁶-C₆Me₆)-2,3-(PhNH)₂-isocloso-1-RuB₉H₇] ( 4 ) and dark-red [1-(η⁶-C₆Me₆)-5,6,7-(PhNH)₃-isocloso-1-RuB₉H₆] ( 5 ). Detailed ¹H and ¹¹B nmr properties of these various compounds are described. The structure of ( 3 ) has been established by a single-crystal X-ray diffraction study of the solvate [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB₉H₈] · 1/2 CH₂Cl₂; the crystals were monoclinic, space group C2/c, with a = 1895.1(3), b = 1556.6(3), c = 1716.4(3) pm, β = 104.37(1)° and z = 8.     

Thermally reversible polymer systems by cyclopentadienylation. I. A model for termination by cyclopentadienylation of olefin polymerization

The reaction between tert-butylchloride (t-BuCl) and dimethylcyclopentadienylaluminum (Me₂AlCPD) was studied as a model for initiation by the tert-butyl cation (t-Bu^⊕) and termination by cyclopentadienylation by the Me₂Al(CPD)Cl^? counteranion of isobutylene polymerization. All reaction products formed in this model system have been identified and quantitatively determined. A comprehensive scheme that indicates pathways to these products was developed (scheme III). It is proposed that the predominant product, tert-butylcyclopentadiene (t-BuCPD), arises in the collapse of the t-Bu^⊕-Me₂Al(CPD)Cl^? ion pair, mainly by CPD^? transfer to the tert-butyl cation. The minor products are neopentane (t-BuMe) and isobutylene (i-C₄H₈), which are probably formed, respectively, by Me^? transfer to and proton loss from the t-butyl cation. Cyclopentadienylation selectivity increases by lowering the temperature and extrapolation of results suggests 100% cyclopentadienylation at ?55°C. The t-BuCl/Me₂AlCPD ratio strongly influences the overall reaction pathway. The reaction is first order in t-BuCl with ΔE_a of ca. 7 kcal/mole (1,2-dichloroethane or chlorobenzene solvents, +24 to ?29°C). Indirect evidence indicates that the kinetic product of cyclopentadienylation is 5-t-BuCPD and that this isomer cannot be tert-butylated; that is, the initiation of 5-t-BuCPD polymerization by t-Bu^⊕ is sterically unfavorable. Detailed analysis of the chemistry and kinetics of the t-BuCl/Me₂AlCPD model system holds important clues to the controlled polymerization of olefins leading to macromolecules with cyclopentadiene (CPD) termini.