Flow and heat transfer over a backward-facing step with a cylinder mounted near its top corner

A study was made to see if it is possible to enhance the heat transfer in the downstream region of a backward-facing step, where heat transfer is normally deteriorated, by the insertion of a cylinder near the top corner of the step. Cylinder size and streamwise position of the cylinder were kept constant but the cross-stream position of the cylinder was changed in three steps. Results of the heat transfer experiment, flow visualization, and measurement of the averaged and fluctuating flow fields were reported. When the cylinder was mounted at a position, a little higher than the top surface of the step, a jet-like flow pattern emerged in the averaged velocity profile beneath the cylinder and the recirculating flow was intensified. Therefore, the velocity of recirculating flow near the wall is increased at some streamwise positions. Additionally, the velocity fluctuation was intensified not only in the shear layer between the jet-like flow and the recirculating flow regions but also in the near wall region, resulting in the effective augmentation of heat transfer in this case. Therefore, it is concluded that the mounting of a cylinder is effective in the enhancement of deteriorated heat transfer in the recirculating flow region, if its is mounted in a proper position.     

Epitaxial silicon oxynitride layer on a 6H-SiC(0001) surface

Hydrogen-gas etching of a 6H-SiC(0001) surface and subsequent annealing in nitrogen atmosphere leads to the formation of a silicon oxynitride (SiON) epitaxial layer. A quantitative low-energy electron diffraction analysis revealed that the SiON layer has a hetero-double-layer structure: a silicate monolayer on a silicon nitride monolayer via Si-O-Si bridge bonds. There are no dangling bonds in the unit cell, which explains the fact that the structure is robust against air exposure. Scanning tunneling spectroscopy measured on the SiON layer shows a bulk SiO2-like band gap of approximately 9 eV. Great potential of this new epitaxial layer for device applications is described.     

Effect of Edge Functionalization on the Bottom-Up Synthesis of Nano-Graphenes

We demonstrate the effect of edge functionalization on the on-surface Ullmann coupling of nano-carbon materials. Unlike 10,10′-Dibromo-9,9′-bianthryl (DBBA), which is widely known to form anthracene polymers and armchair-edge graphene nanoribbons on Au(111), newly-developed precursor named 5-bromo-11(10-bromoanthracene-9-yl)anthra[2,3-b : 7,6-b′]dithiophene (BABAT) with isomers, which has similar structure as DBBA with one anthracene substituted with anthradithiophene, was found to make intramolecular C−C bonding instead of long anthracene polymers after annealing at 200 °C on Au(111). The mechanism was investigated using first-principle density functional theory, which revealed that on-surface polymerization is not kinetically preferred in case of BABAT. The reaction rate of intramolecular C−C bonding of BABAT is ∼206 times faster than that of DBBA. The intramolecular C−C bonding in DBBA biradicals, on the other hand, do not take place because of faster reverse reaction. By referring to electron density of BABAT biradicals, it was concluded that thiophene functionalization modifies distribution of electron density in BABAT radicals and facilitates electrophilic addition, leading to intramolecular C−C bonding after 200 °C annealing. These results indicate that the design of radical moiety is particularly important in the on-surface Ullmann-type coupling.     

Onion (Allium cepa L.)-Derived Nanoparticles Inhibited LPS-Induced Nitrate Production,However, Their Intracellular Incorporation by Endocytosis Was Not Involved in This Effect on RAW264 Cells

The aim of this study was to evaluate the involvement of nanoparticles prepared from Allium cepa L. as anti-inflammatory agents. In the present study, we identified nanoparticles from Allium cepa L. using the ultracentrifugation exosome purification method. The nanoparticles were referred to as 17,000× g and 200,000× g precipitates, and they contained quercetins, proteins, lipids, and small-sized RNA. The nanoparticles inhibited nitric oxide production from lipopolysaccharide (LPS)-stimulated RAW264 cells without cytotoxic properties. Cellular incorporation was confirmed by laser microscopic observation after PKH26 staining. The inhibition of caveolae-dependent endocytosis and macropinocytosis significantly prevented the incorporation of the nanoparticles but had no effect on the inhibition of nitric oxide in RAW264 cells. Collectively, the identified nanoparticles were capable of inhibiting the LPS response via extracellular mechanisms. Taken together, the way of consuming Allium cepa L. without collapsing the nanoparticles is expected to provide an efficient anti-inflammatory effect.     

Schrödinger uncertainty relation,Wigner–Yanase–Dyson skew information and metric adjusted correlation measure

In this paper, we give Schrödinger-type uncertainty relation using the Wigner–Yanase–Dyson skew information. In addition, we give Schrödinger-type uncertainty relation by use of a two-parameter extended correlation measure. We finally show a further generalization of Schrödinger-type uncertainty relation by use of the metric adjusted correlation measure. These results generalize our previous result in [Phys. Rev. A 82 (2010) 034101].     

Selective two-step labeling of proteins with an off/on fluorescent probe

We present a novel design strategy for off/on fluorescent probes suitable for selective two-step labeling of proteins. To validate this strategy, we designed and synthesized an off/on fluorescent probe, 1-Ni(2+), which targets a cysteine-modified hexahistidine (His) tag. The probe consists of dichlorofluorescein conjugated with nitrilotriacetic acid (NTA)-Ni(2+) as the His-tag recognition site and a 2,4-dinitrophenyl ether moiety, which quenches the probe's fluorescence by photoinduced electron transfer (PeT) from the excited fluorophore to the 2,4-dinitrophenyl ether (donor-excited PeT; d-PeT) and also has reactivity with cysteine. His-tag recognition by the NTA-Ni(2+) moiety is followed by removal of the 2,4-dinitrophenyl ether quencher by proximity-enhanced reaction with the cysteine residue of the modified tag; this results in a marked fluorescence increase. Addition of His-tag peptide bearing a cysteine residue to aqueous probe solution resulted in about 20-fold fluorescence increment within 10 min, which is the largest fluorescence enhancement so far obtained with a visible light-excitable fluorescent probe for a His-based peptide tag. Further, we successfully visualized CysHis(6)-peptide tethered to microbeads without any washing step. The probe also showed a large fluorescence increment in the presence of His(6)Cys-tagged enhanced blue fluorescent protein (EBFP), but not His(6)-tagged EBFP. We consider this system is superior to large fluorescence tags (e.g., green fluorescent protein: 27 kDa), which can perturb protein folding, trafficking and function, and also to existing small tags, which generally show little fluorescence increase upon target recognition and therefore require a washout step. This strategy should also be applicable to other tags.     

A self-assembled helical anthracene nanofibre whose P- and M-isomers show unequal linear dichroism in a vortex

An anthracene derivative, having benzamide substituents bearing optically active alkyl chains, in hexane forms one-handedly biased helical supramolecular nanofibres, which show unequal linear dichroism (LD) in right- and left-handed vortex flows.     

Development of a fluorescein analogue, TokyoMagenta, as a novel scaffold for fluorescence probes in red region

We present a design strategy for fluorescence probes with a high off/on activation ratio in the red wavelength region, based on a novel fluorescein analogue in which the O atom at the 10 position of the xanthene chromophore is replaced with a Si atom. To demonstrate the usefulness of this strategy, we designed and synthesized a red-fluorescent probe for β-galactosidase, and showed that it works in live HEK293 cells.     

Rational Design of a Near‐infrared Fluorescence Probe for Ca2+ Based on Phosphorus‐substituted Rhodamines Utilizing Photoinduced Electron Transfer

Fluorescence imaging in the near‐infrared (NIR) region (650–900 nm) is useful for bioimaging because background autofluorescence is low and tissue penetration is high in this range. In addition, NIR fluorescence is useful as a complementary color window to green and red for multicolor imaging. Here, we compared the photoinduced electron transfer (PeT)‐mediated fluorescence quenching of silicon‐ and phosphorus‐substituted rhodamines (SiRs and PRs) in order to guide the development of improved far‐red to NIR fluorescent dyes. The results of density functional theory calculations and photophysical evaluation of a series of newly synthesized PRs confirmed that the fluorescence of PRs was more susceptible than that of SiRs to quenching via PeT. Based on this, we designed and synthesized a NIR fluorescence probe for Ca²⁺, CaPR‐1 , and its membrane‐permeable acetoxymethyl derivative, CaPR‐1 AM , which is distributed to the cytosol, in marked contrast to our previously reported Ca²⁺ far‐red to NIR fluorescence probe based on the SiR scaffold, CaSiR‐1 AM , which is mainly localized in lysosomes as well as cytosol in living cells. CaPR‐1 showed longer‐wavelength absorption and emission (up to 712 nm) than CaSiR‐1 . The new probe was able to image Ca²⁺ at dendrites and spines in brain slices, and should be a useful tool in neuroscience research.     

The Effect of pH on Emulsion Polymerization of Styrene in the Presence of an Amphoteric Emulsifier

The emulsion polymerization of styrene in the presence of an amphoteric emulsifier of the amino acid type, N-lauroyl-1-N, N-dimethyllysine (DMLL), has been studied at various pH values. The polymerization rate and the particle number concentration increased with increasing pH of the aqueous DMLL solution and these curves changed in slope at approximately pH 4 and pH 9. The physicochemical properties of the aqueous DMLL solution, such as CMC and the aggregation number, changed with the pH and similarly changed in slope at almost the same pH as the emulsion polymerization. These pH values were in good agreement with the pH at which the ionic form of the DMLL molecule changes. The number of latex particles formed changed in proportion to the number of DMLL micelles in the solution. The particle size and the molecular weight of the synthesized latex particles were also dependent on the physicochemical solution properties accompanying the change in the ionic forms of DMLL.