固相萃取-气相色谱串联质谱法测定饮用水中的多环芳烃和邻苯二甲酸酯

采用固相萃取、中性硅胶-中性氧化铝复合柱对水样进行提取和净化,采用气相色谱串联质谱法测定水样中的16种多环芳烃和6种邻苯二甲酸酯.该方法对水样中的多环芳烃和邻苯二甲酸酯的检测限分别为0.10～0.26 ng/L和0.20～2.0 ng/L,加标回收率分别在88.6％～111.7％和85.3％～110.5％之间,样品重复测定6次,相对标准偏差(RSD)均小于15％.实验结果表明,该方法灵敏度高、重复性好、定量准确,可用于饮用水中多环芳烃和邻苯二甲酸酯的测定.     

锌掺杂对TiO2染料敏化电池光阳极中电荷俘获态分布及电子复合过程的影响

基于瞬态光电压和瞬态光电流技术研究了锌掺杂的TiO2染料敏化太阳能电池中电子复合及传输的动力学行为.通过实验获得了不同阳极掺杂条件下的电子复合时间常数与电子收集时间常数,考察了锌掺杂对电池阳极材料导带能级和电子俘获态的影响.研究结果表明,锌的掺杂在提高TiO2导带能级的同时延长了俘获态电子的复合时间常数,从而大大提高了电池的开路电压.     

大比表面积钛黑颜料的制备和表征

本文首次通过pH值控制沉淀法制备前驱物丁二酸钛肼复盐, 并进一步热分解制备大比表面积钛黑颜料-黑色钛氧化物。通过比表面积(BET)、电子能谱(EDS)、X射线光电子能谱分析(XPS)、X射线粉末衍射(XRD)、场发射扫描电子显微镜(HRSEM)、物理吸附仪、激光粒度仪和Color i5型台式分光测色仪对黑色钛氧化物进行了表征, 确定了黑色钛氧化物的组成为2TiO₂·Ti₂O₃, 其表面积为53.854 4 m²·g^-1。并考察了酸源、水合肼用量、酸钛比、反应时间、pH、NaOH浓度和煅烧温度等各种反应参数对黑色钛氧化物的颗粒尺寸、分布均匀性和黑色度的影响。用元素分析仪和等离子体光谱仪测定了前驱物组成, 确定其组成为[Ti(C₄H₄O₄)₂]_0.85·2Ti₂O₃·6N₂H₄·3H₂O, 并探讨了黑色钛氧化物形成机理, 为新型混合价材料黑色钛氧化物的制备提供重要参考依据。     

红外吸收光谱法测定钒铝合金中的碳和硫

通过工作曲线法、增量法、回收率实验、重复性实验等研究,验证了红外吸收光谱法测定钒铝合金中碳、硫结果的准确度,从而确立了无标准样品情况下测定钒铝合金中碳、硫的红外吸收光谱分析方法。通过测定标准样品并与实际值对照得知方法准确度高,误差小,实用性强。     

Long-term follow-up analysis of zolpidem in fingernails after a single oral dose

The determination of xenobiotics in keratinized matrices, such as nails and hair, has received considerable attention because of the relatively long detection window for compounds. The distribution of xenobiotics in fingernails, unlike hair, was equivocal. The main aim of this study was to use follow-up surveys to measure zolpidem profiles in nails after subjects consumed a single dose of the drug. In addition, the zolpidem concentrations in nails were compared with data for different biosamples, such as hair and blood from previous work. With these preconditions, a high-performance liquid chromatography–tandem mass spectrometry method was developed and validated for the determination of zolpidem in nails. Nails underwent alkaline hydrolysis and were extracted with diethyl ether. A Capcell Pak C18 MGII column was used to separate the target compound, and an API 4000 Qtrap mass spectrometer was used as a detector. The results for nail samples from seven subjects who had taken a single 10 mg zolpidem dose were significant: two relatively high zolpidem concentrations were observed in the long-term follow-up analysis of nails. The zolpidem concentration was less than 1.74 pg/mg and less than 3.29 pg/mg in fingernails and toenails, respectively. The subsequent peak concentration of zolpidem was observed between 10 and 15 weeks after each subject took a single dose of the drug. This result suggested that the germinal matrix area was a primary in vivo pathway for zolpidem secretion into the nail. The analysis of biosamples, such as nails, may be a useful adjunct to conventional methods of drug testing and hair analysis. Further research is needed concerning the contamination risk in analysis of nail biosamples.     

烯烃齐聚催化反应研究进展*

烯烃齐聚反应作为一类重要的工业反应,是生产发动机燃料、洗涤剂原料、润滑油、增塑剂等化学品的有效途径。本文详细综述了国内外烯烃齐聚反应的研究进展与工业化现状,重点介绍了用于该反应的催化剂和工艺过程,并讨论了典型催化剂体系上的烯烃齐聚反应机理。     

颗粒内部的碘离子对碘溴化银微晶照相性能的影响

本文研究了用连体四角锥碘化银为晶核制备类似于四面体碘溴化银微晶和用六方角锥碘化银为晶核制备片状碘溴化银微晶的方法,并对两种不同微晶的结构,形态和性能进行了比较和分析.     

Ab initio study on the mechanism of reaction HNCO+NH_2

Ab initio UMP2 and UQCISD(T) calculations, with 6-311G** basis sets, were performed for the titled reactions. The results show that the reactions have two product channels: NH2+ HNCO→NH3+NCO (1) and NH2+HNCO-N2H3+CO (2), where reaction (1) is a hydrogen abstraction reaction via an H-bonded complex (HBC), lowering the energy by 32.48 kJ/mol relative to reactants. The calculated QCISD(T)//MP2(full) energy barrier is 29.04 kJ/mol, which is in excellent accordance with the experimental value of 29.09 kJ/mol. In the range of reaction temperature 2300-2700 K, transition theory rate constant for reaction (1) is 1.68 × 1011- 3.29 × 1011 mL · mol-1· s-1, which is close to the experimental one of 5.0 ×1011 mL× mol-1· s-1 or less. However, reaction (2) is a stepwise reaction proceeding via two orientation modes, cis and trans, and the energy barriers for the rate-control step at our best calculations are 92.79 kJ/mol (for cis-mode) and 147.43 kJ/mol (for trans-mode), respectively, which is much higher than     

噻吩加氢脱硫和四氢萘催化加氢反应中的载体和助剂的影响

 为了更好地认识加氢脱硫和催化加氢反应中的载体影响和助剂效应，在同样的催化剂制备方法及反应条件下，研究了噻吩加氢脱硫（HDS）和四氢萘催化加氢（HYD）反应．结果表明，对于无助剂的Mo和W催化剂，载体对催化活性的影响顺序为TiO2－Al2O3＞ZrO2＞Al2O3．助剂的添加改变了催化剂活性顺序．Ni助剂催化剂的活性明显高于Co助剂催化剂．ZrO2担载的添加Ni的Mo和W催化剂分别获得了最佳的HDS和HYD活性．然而，添加Pt的Mo和W催化剂其HDS和HYD活性仅是Pt与Mo（W）二者的加和，Pt与Mo（W）之间没有协同效应．先将担载的Mo和W预硫化再将助剂引入体系的催化剂制备方法可以避免Ni和Co过早硫化形成类硫化镍（或硫化钴）物相，与采用螯合物分子方法制备的催化剂间有一定的相似性．     

催化材料对病毒的吸附和灭活作用及对哺乳动物细胞的毒性

 提出了以吸附和催化原理灭活病毒的设想，旨在开发出对病毒有过滤、吸附及灭活作用的高效非特异性催化材料，应用于各种防护设施，有效控制非典型肺炎（SARS）的传播．采用与SARS病毒相似的副流感病毒作为模拟对象，进行了吸附及灭活该病毒的催化材料研究，并考察了催化材料对哺乳动物细胞的毒性．结果表明，病毒气溶胶的阻留及吸附结果与基于DNA吸附的色谱分析结果相一致；部分材料可以强烈地吸附病毒（100％），甚至在强烈振荡下并洗脱至第3次，病毒也不能脱附；一些材料不仅可以吸附病毒，而且强烈振荡后的洗脱液虽然表现出一定的血凝效价，但接种鸡胚后，病毒并不增殖，说明材料具有明显的催化病毒灭活性能；对细胞毒性极低的材料可以用在与人体接触的防护材料和设施中．筛选出的性能优异的催化材料，拟进一步考察其对SARS病毒的灭活作用．