基于FPGA反射式激光双速测量系统的设计与实现

物体在运动时旋转,可以减小物体运动过程中的空气阻力,增加运动运动稳定性,提高发射效率。而在一些发射系统中,弹丸在运动的过程中,也会发生旋转。通过测量弹丸的旋转速度和运动速度,可以更好的了解弹丸运动规律、调控运动行为,获取即时环境信息。文中提出了一种高灵敏度反射式测速系统,该测速系统采用高速响应数字激光传感器作为测量器件,采用FPGA编程进行控制和运算,具有抗低频电磁干扰的优点。应用该测速系统可以同时测量电磁发射系统中弹丸在出口处的水平运动速度和旋转速度。     

对于金属丝在准直激光照射下形成环形光的研究

准直激光照射下的金属丝,会在垂直于金属丝方向的光屏上出现环形光。本文采用在金属丝表面包裹碳颗粒的方法,分离反射光和衍射光,研究光路的组成。接着探究金属丝的半径和粗糙程度对环形光的影响。并在此基础上,测量环形光光强分布规律,结合几何光学和夫琅禾费衍射进行解释。光源也是潜在的影响因素,本文探究了不同波长激光对环形光的影响。     

基于粪便可见-近红外反射光谱的高山麝慢性肠炎诊断

提出了一种利用粪便可见-近红外反射光谱进行高山麝慢性肠炎诊断的新方法。以FieldSpec？3地物光谱仪采集了125份高山麝粪便（正常粪样70份,慢性肠炎患者粪样55份）的光谱数据,将其随机分成训练集（95份）和检验集（30份）。光谱经S.Golay平滑与一阶导数处理后以主成分分析法（PCA）降维。以前6个主成分（含原始光谱95.16%的特征信息）作为新变量,利用训练集样本,分别以模糊模式识别、BP-神经网络、Fisher线性判别以及Bayes逐步判别四种方法建立高山麝慢性肠炎的诊断模型。对检验集30个未知样的预测表明,Fisher线性判别的准确率为86.7%,模糊模式识别与BP-神经网络模型判别的准确率为90%,Bayes逐步判别的准确率最高,达93.3%。进一步分析发现所有误诊都源于将正常样误判为病样,四种方法对病样的检出率均达100%。说明利用粪便的可见-近红外反射光谱进行高山麝慢性肠炎的快速、非接触性诊断是可行的,且PCA 结合Bayes逐步判别是一种优选方法。     

煤炭自然发火产生明火燃烧的分岔分析

基于煤氧复合作用学说,建立了炭粒填充床燃烧的数学模型,研究了炭粒自然发火发生明火燃烧的分岔特性,揭示了炭粒由自燃发生明火燃烧本质上属于气相反应.在气相反应区,忽略多相反应区的影响,应用数值分岔理论,以Frank-Kamenetskii参数为分岔参数对气相着火-熄火的发生进行了分岔分析,指出了炭粒自燃向明火转捩的分岔曲线包含稳定的着火分支、熄火分支及非稳定状态分支共三个分支,分析了其着火和熄火的非线性特性,得出了发生气相反应的条件,并探讨了方程中的其他控制参数对炭粒发生明火燃烧过程中着火-熄火分岔特性的影响.     

天然气在不同初始温度和压力下的燃烧特性研究

利用定容燃烧弹研究了不同初始温度和初始压力下的天然气燃烧特性,分析了初始温度、初始压力和当量比对其燃烧过程的影响.研究结果表明:随着初始温度的升高(300～450 K),天然气质量燃烧速率明显增加,燃烧持续期和火焰发展期显著缩短.随着初始压力的升高(0.1～0.75 MPa),天然气质量燃烧速率明显减慢,燃烧持续期和火焰发展期显著增长.且稀混合气和浓混合气条件下初始温度和初始压力的变化对燃烧持续期和火焰发展期的影响更明显.     

Dielectrophoretic assembly of ZnO nanowires

The synthesis of zinc oxide （ZnO） nanowires is achieved by vapor phase transportation （VPT） method. The designed quartz tube, whose both ends are narrow and the middle is wider, is used to control the growth of ZnO nanowires. Dielectrophoresis （DEP） method is employed to align and manipulate ZnO nanowires which are ultrasonic dispersed and suspended in ethanol solution. Under the dielectrophoretic force, the nanowires are trapped on the pre-patterned electrodes, and further aligned along the electric field and bridge the electrode gap. The dependence of the alignment yield on the applied voltage and frequency is investigated.     

双轴晶体锥光效应光盘径向寻迹研究

根据晶体锥光效应提出一种光控制方法.在双轴晶体中光波沿光轴方向入射时,其传播方向随光偏振方向的不同而改变,通过控制磁光偏振调制器上磁场强度改变光的偏振方向,从而实现对激光束方向的控制.据此分析了双轴晶体锥光效应光盘寻迹的基本原理并设计出总体方案,数值模拟计算得到晶体入射光偏振角度与寻迹位移的关系,初步验证了此方案的合理性,该方案与传统机电跟踪寻迹方式相比具有结构轻巧,动态响应快等优点.同时,也为光开关、扫描等技术提供了一种新的思想和方法.     

Spectroscopic Properties and Electronic Structure of Bis(L—Histidine)Copper(II) Dinitrate Dihydrate

Electronic absorption spectrum, photoacoustic absorption spectrum and ESR spectrum of bis(L-histidine)copper(II) dinitrate dihydrate crystal were recorded. The experimental results are discussed quantitatively with ligand field theory (LFT) and the radial wave function of non-free copper(II). Our calculations coincides well with the experimental results, and in particular, provides significant correlations between the spectra and coordination structures. The ESR spectrum gives some information about the restudy of classification for the ESR spectra of bis(amino acidato)copper(II) complexs. Additionally, the differences between crystal and frozen solution spectra due to the variance of PH are also reported for the title compound.     

Comparison of shear banding in BMGs due to thermal-softening and free volume creation

This paper reports a comparative study of shear banding in BMGs resulting from thermal softening and free volume creation. Firstly, the effects of thermal softening and free volume creation on shear instability are discussed. It is known that thermal softening governs thermal shear banding, hence it is essentially energy related. However, compound free volume creation is the key factor to the other instability, though void-induced softening seems to be the counterpart of thermal softening. So, the driving force for shear instability owing to free volume creation is very different from the thermally assisted one. In particular, long wave perturbations are always unstable owing to compound free volume creation. Therefore, the shear instability resulting from coupled compound free volume creation and thermal softening may start more like that due to free volume creation. Also, the compound free volume creation implies a specific and intrinsic characteristic growth time of shear instability. Finally, the mature shear band width is governed by the corresponding diffusions (thermal or void diffusion) within the band. As a rough guide, the dimensionless numbers: Thermal softening related number B, Deborah number (denoting the relation of instability growth rate owing to compound free volume and loading time) and Lewis number (denoting the competition of different diffusions) show us their relative importance of thermal softening and free volume creation in shear banding. All these results are of particular significance in understanding the mechanism of shear banding in bulk metallic glasses (BMGs). Supported by the Chinese Academy of Sciences under the project “Multi-Scale Complex System” (Grant No. KJCX-SW-L08), the National Natural Science Foundation of China (Grant Nos. 10725211 and 10721202), and the Doctorial Start-up Fund of Hunan University of Science and Technology (Grant No. E50840)     

铁、铬、钒原子激发态的光电离截面

这篇文章分别在278～288nm、335～361nm、300～310nm激光波长范围内分别报道过渡金属中的铁原子、铬原子和钒原子的共振增强多光子电离(REMPI)的实验结果.实验中采用激光烧蚀和分子束相结合的技术制备金属原子.光离子产物由飞行时间质谱仪检测.根据共振电离离子信号对探测激光功率的依赖关系,得到原子激发态的光电离截面值.