ZnII and CdII Metal Organic Frameworks Based on 2-Methyl-6-oxygen-1,6-dihydro-3,4'bipyridine-5-carbonitrile

To investigate the coordination chemistry of modbc (2-methyl-6-oxygen-1,6-dihydro-3,4'-bipyridine-5-carbonitrile) with Zn^II and Cd^II salts under the solvothermal conditions, six new MOFs with the formulas [Zn(modbc)₂(mpa)]_n ( 1 ), [Zn(modbc)(mpa)(H₂O)]_n ( 2 ), [Zn(modbc)(pa)_0.5(H₂O)]_n ( 3 ), [Cd(modbc)(pa)_0.5(H₂O)]_n ( 4 ), [Zn(modbc)₂(tpa)]_n ( 5 ), and [Cd(modbc)₂(pda)(H₂O)]_n ( 6 ) (mpa = m-phthalic acid; pa = pyromellitic acid; tpa = terephthalic acid; pda = pentane diacid) were successfully synthesized by solvothermal reaction and fully characterized by elemental analysis, IR spectroscopy, single crystal, powder X-ray diffraction, thermal and photoluminescence properties. Though MOFs 3 and 4 have the same structure, we have obtained three different kinds of coordination configurations by the X-ray diffration analysis. Compared with 1 and 2 , coordination water has no effect on the solid fluorescence emission of MOFs. It is worth noting that the fluorescence intensity of 3 containing central Zn^II atoms is very strong, whereas that of isomorphism 4 containing central Cd^II atoms has almost no fluorescence emission, showing that metal ions have very important influence on the fluorescence emission. Further, we found that solvents had an important effect on the fluorescence emission in liquid fluorescence of MOFs 1 – 6 .     

Single Chlamydomonas reinhardtii cell separation from bacterial cells and auto-fluorescence tracking with a nanosieve device

A planar, transparent, and adaptable nanosieve device is developed for efficient microalgae/bacteria separation. In the proposed method, a sacrificial layer is applied with dual photolithography patterning to achieve a 1D channel with a very low aspect ratio (1:10 000). A microalgae/bacteria mixture is then introduced into the deformable PDMS nanochannel. The hydrodynamic deformation of the nanochannel is regulated to allow the bacteria cells to pass through while leaving the microalgae cells trapped in the device. At a flow rate of 4 μL/min, the supernatant collected from the device is indistinguishable from a control solution, indicating that nearly all the microalgae cells are trapped in the device. Additionally, this device is capable of single cell auto-fluorescence tracking. These microalgae cells demonstrate minimal photobleaching over 250 s laser exposure and could be used to monitor hazardous compounds in the sample with a continuous flow. This method will be valuable to purify microalgae samples containing contaminations and study single-cell heterogeneity.     

中空碳纳米球的制备及VOCs吸附性能

首先, 在碱性条件下, 不使用表面活性剂, 采用St?ber小球法以正硅酸四乙酯(TEOS)和正硅酸四丙酯(TPOS)为硅源, 生成初级氧化硅球形颗粒; 然后, 使酚醛树脂(间苯二酚和甲醛)与球形氧化硅的羟基共缩合形成酚醛树脂-氧化硅复合材料; 最后, 经高温碳化和酸蚀获得了空心碳纳米球(HCNSs). 通过调节TEOS/TPOS的摩尔比获得了一系列具有良好的单分散性且粒径、 壁厚可调节的HCNSs, 其粒径和壁厚分别在280~430 nm和15~63 nm的范围内. 仅以TPOS为硅源时合成的HCNS-0/4具有较大的粒径(426 nm)和壁厚(63 nm)、 较高的比表面积(1216 m²/g)和孔容(0.508 cm³/g), 并且具有较大的挥发性有机化合物(VOCs)吸附性能, 其正己烷、 甲苯和油气的静态吸附容量分别为2.02, 1.42和0.926 g/g, 正己烷和甲苯的动态吸附容量分别为2.01 g/g和1.37 g/g, 均远高于商业化活性炭.     

可控表面磷原子修饰提升超细W2C纳米颗粒电解水析氢反应性能

研究高活性和稳定性的非贵金属基析氢催化剂对解决当前能源危机和环境污染问题具有重要意义.碳化钨具有与贵金属Pt类似的d带电子结构,因而成为一类新兴的非贵金属析氢催化剂,受到广泛关注.磷掺杂是提高催化剂析氢活性的有效方法之一,然而目前最常见的构筑磷掺杂方法是使用多金属氧酸盐(POMs,如H3PW12O40),其固定的W/P原子比导致W2C中的掺杂浓度难以调控,并且磷掺杂主要是进入碳载体而不是碳化物本身,从而导致无法明确杂原子对其电催化析氢活性的贡献.本文采用植酸(PA)为磷源设计合成了可控磷掺杂W2C纳米颗粒,并探讨了催化剂组分、杂原子掺杂位置与析氢性能之间的关系.深入研究了磷掺杂碳化钨(WCP)的化学结构和析氢活性.与原始的W2C催化剂相比,WCP具有更高的本征活性、更快的电子转移速率和更多的活性位数量,并且在酸性和碱性条件下均表现出较好的析氢性能.特别是过电位为-200 mV时,WCP催化剂的本征活性在酸性和碱性条件下分别为0.07和0.56 H2 s-1,高出纯W2C(0.01和0.05 H2 S-1)数倍.同时,在电流密度为-10 mA cm-2时,优化后的WCP催化剂在酸性和碱性条件下的析氢过电位分别降低了96和88 mV.XPS及EDS元素分析结果表明,随磷源添加量增加,磷掺杂从碳化钨表面逐渐向内部扩散,进一步说明磷取代位置与析氢活性之间的构效关系,高浓度的表面磷取代可以加速质子捕获过程,从而显著提高其析氢活性,而过量的内部磷取代会破坏W2C结构,降低电子转移速率,从而导致析氢性能下降.利用密度泛函理论计算深入研究了WCP具有较好析氢性能的原因,与内部磷取代相比,表面磷取代会使碳化钨表现出更合适的氢吸附自由能,并且更加有效地降低了氢释放势垒,从而优化了析氢反应动力学.综上,本文为元素掺杂工艺提供了新的思路,同时研究了表面异质原子对析氢活性的关键作用,为该类催化材料的构效关系研究提供了新思路.     

三功能策略设计制备具有优异低温抗积碳性能的Ni-CeO2@SiO2催化剂催化甲烷干重整反应

随着全球人为温室气体排放量(主要是甲烷和二氧化碳)的增加,全球变暖的趋势逐渐增加,因此,迫切需要通过各种技术来捕获和利用这些温室气体.甲烷干气重整反应(DRM)可以有效地将甲烷和二氧化碳这两种资源丰富、价格低廉的温室气体转化为高附加值化学品,减少它们向大气排放.尽管DRM工艺的应用具有许多优势,但是反应期间碳沉积和活性组分的烧结是阻碍其工业应用的两个主要原因.这些碳沉积物可能覆盖活性中心或阻塞催化剂的孔道,从而导致催化剂活性降低.镍基催化剂因其价格低廉、初始活性高和资源丰富而得到广泛的应用.但应用于DRM反应的Ni基催化剂在反应中容易烧结和积碳,导致催化剂迅速失活.为解决上述问题,本文从三功能策略角度出发,即SiO2壳层的限域作用和Ni-Ce之间的协同作用以及CeO2的消除积碳作用,采用原位一锅法设计合成了一种限域型Ni-CeO2核壳结构催化剂(Ni-CeO2@SiO2).通过X射线衍射、透射电子显微镜、能量色散X射线光谱、N2吸附/脱附、氢气程序升温还原和脱附、氧气程序升温脱附、拉曼光谱、热重分析和原位漫反射红外傅里叶变换光谱测试对催化剂进行了系统的表征,来揭示催化剂的理化性质和反应机理.催化剂应用于甲烷干气重整反应结果表明,在温度区间为550～800℃时,与传统浸渍法合成的催化剂相比,Ni-CeO2@SiO2催化剂具有更高的活性.高温800℃下的稳定性测试结果显示,传统浸渍法合成的催化剂在反应20 h后就出现了大量的积碳且活性下降明显;而Ni-CeO2@SiO2催化剂在800℃下反应100 h后未检测到积碳,并且催化剂中的Ni纳米颗粒的平均粒径从5.01 nm仅增长到5.77 nm,表现出很好的高温抗积碳和耐烧结性能.值得注意的是,Ni-CeO2@SiO2催化剂在低温600℃(形成碳沉积的最可能温度区域)下反应20h后也未检测到积碳的形成,表现出催化剂良好的低温稳定性和抗积碳性能.这可能归因于对Ni-CeO2@SiO2催化剂的三功能作用,即多孔二氧化硅壳层的限域作用、Ni与CeO2之间强的金属-金属氧化物相互作用以及具有丰富活性氧物种CeO2的消除积碳的作用.通过原位漫反射红外傅里叶变换光谱测试来探究反应机理.结果 表明,DRM反应在Ni-CeO2@SiO2催化剂上遵循L-H机理,添加CeO2可以消除碳沉积并促进CO2活化.该三功能策略为设计其他应用于DRM的高性能催化剂提供了指导,有望加快该工艺的工业化.     

新型嘧啶单环类非经典叶酸拮抗剂的合成及抗肿瘤活性研究

以课题组前期设计合成的非经典叶酸拮抗剂6-(4'-甲基苯乙基)-N5-氯乙酰基-2,4-二氨基哌啶并[3,2-d]嘧啶(wm-8.2)为先导化合物,将wm-8.2中的哌啶并嘧啶双环结构简化为嘧啶单环结构,以提高分子柔韧性并简化分子结构,根据6-位空间占位设计6-H和6-甲基两个系列,考察了不同桥链长度和不同芳香杂环侧链对抗肿瘤活性的影响.同时对具有叶酸抑制剂分子结构特征的关键中间体进行活性对比测定,研究了N(5)位氯乙酰基对活性的影响.两个系列目标化合物和关键中间体共36个化合物的结构均经1H NMR,13C NMR和MS确证.生物活性测定表明,6位为甲基的化合物中,具有三碳桥链及对甲基苯环侧链的6-甲基-2,4-二氨基-5-(N-(4-甲基苯基)丙基-N-(2-氯乙酰基))氨基嘧啶(6b-3)具有最好的HL-60、A549和HCT116细胞增殖抑制活性,IC50分别为0.25,0.83和0.63μmol?L^-1.化合物6b-3在N(5)位氯乙酰基取代之前的关键中间体6-甲基-2,4-二氨基-5-(N-(4-甲基苯基)丙基)氨基嘧啶(5b-3)具有最优的二氢叶酸还原酶抑制活性.总结了化合物的构效关系,并用计算机模拟进行了阐释.     

A novel thin-layer chromatography-based method for Brazilin quantification

JPC – Journal of Planar Chromatography – Modern TLC - Brazilin, a constituent of the Chinese medicine heartwood, exhibits pronounced anti-tumor effects. To date, brazilin quantification...     

Tris(pentafluoroethyl)silanol Derivatives and the Lewis Amphoteric Tris(pentafluoroethyl)silanolate Anion, [Si(C2F5)3O]−

While alkyl-substituted siloxanes are widely known, virtually nothing is known about perfluoroalkyl siloxanes and their congener species, the silanols and silanolates. We recently reported on the tris(pentafluoroethyl)silanide ion, [Si(C₂F₅)₃]⁻, which features Lewis amphoteric character deriving from the pentafluoroethyl substituents and their strong electron-withdrawing properties. Transferring this knowledge, we investigated the Lewis amphoteric behavior of the tris(pentafluoroethyl)silanolate, [Si(C₂F₅)₃O]⁻. In order to examine such Lewis amphoteric behavior, we first developed a strategy for the synthesis of the corresponding silanol Si(C₂F₅)₃OH, which readily condenses at room temperature to the hexakis(pentafluoroethyl)disiloxane, (C₂F₅)₃SiOSi(C₂F₅)₃. Deprotonation of Si(C₂F₅)₃OH employing a sterically demanding phosphazene base allows the characterization of the first example of a dimeric triorganosilanolate: the dianionic hexakis(pentafluoroethyl)disilanolate, [{Si(C₂F₅)₃O}₂]²⁻, implies Lewis amphoteric character of the monomeric [Si(C₂F₅)₃O]⁻ anion.     

Microplasma electrochemistry (MIPEC) strategy for accelerating the synthesis of metal organic frameworks at room temperature

Metal organic frameworks(MOFs) are a kind of promising materials in many applications,while the fast and controllable synthesis of MOFs is still challenging.Here,taking HKUST-1 as illustration,a microplasma electrochemistry(MIPEC) strategy was developed to accelerate the synthesis process of MOFs with micro-plasma acting as cathode.Treating the HKUST-1 precursor solution with micro-plasma cathode could not only transfer the electrons into the solution leading to the deprotonation effect,but also generate radical species to trigger and accelerate the nucleation and growth of MOFs at the plasmaliquid interface.Thus,uniform and nanosize MOFs could be prepared within minutes.The obtained MOFs show similar excellent uranium adsorption properties compared with those obtained by other method,with a highly adsorption capability of uranium with 550 mg/g in minutes.The novel MIPEC strategy developed in this work provides an alternative for controllable synthesis of MOFs,and especially has potential application in accelerating traditional organic synthesis.     

A purely organic D-π-A-π-D emitter with thermally activated delayed fluorescence and room temperature phosphorescence for near-white OLED

A purely organic D-π-A-π-D type emitter showing thermally activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) was designed and synthesized by utilizing the benzophenone as an acceptor and the N-phenyl-2-napthylamine as a donor moiety.It exhibits considerable TADF character in doped PMMA film and room temperature phosphorescence with a long lifetime of 74 ms at466 nm in solid state.The devices with the configuration of ITO/Mo_2 O_3(4 nm)/mCP(30 nm)/mCP:x wt%NP2 BP/TmTyPB(60 nm)/LiF(1.5 nm)/AI(100 nm) were prepared by vacuum evaporation to explore their electroluminescent performance.Intere stingly,the non-doped device has obtained near-white emission with a fluorescence emission peak at 475 nm and a phosphore scence emission peak at 563 nm having the CIE coordinate of(0.23,0.32) and the maximum external quantum efficiency of 1.09%.