Synthesis and healing properties of poly(arylether sulfone)–poly(alkylthioether) multiblock copolymers containing disulfide bonds

Thermoplastic elastomers composed of soft and hard segments are important elastic and processable synthetic polymers. The microphase‐separated soft domains show low glass transition temperature and possess sufficient chain mobility at room temperature. In this study, we report the synthesis and healing properties of multiblock copolymers containing disulfide bonds as dynamic covalent bonds. The multiblock copolymers composed of poly(arylether sulfone) and poly(alkylthioether) segments were synthesized by oxidative coupling polymerization of the corresponding thiol‐terminated oligomers. Atomic force microscopy phase images, differential scanning calorimetry, and dynamic mechanical analysis curves indicated the microphase‐separated morphology of the multiblock copolymer. Self‐healing properties of the polymer were evaluated by changes in the elongation at break of the cut/adhered samples. The elongation recovery increased with UV irradiation time, and the multiblock copolymer showed a 93% recovery after UV irradiation for 5 h. The healing efficiency induced by UV irradiation, determined by subtracting the recovery without UV irradiation, was calculated to be 51%. According to the UV spectra and solubility changes after UV irradiation, the main healing factor in this study was the crosslinking reactions caused by thiyl radicals generated from UV irradiation instead of disulfide exchange reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3545–3553     

Calorimetric study of the cubic mesogen, ACBC(6)

The heat capacity of the cubic mesogen ACBC(16) was measured between 16 and 500 K by adiabatic calorimetry. As well as the known condensed phases, a new crystalline phase was found to undergo a glass transition at around 165 K. Phase transitions between crystal, SmC, cubic, and isotropic liquid phases took place at 399.16, 431.15, and 474.30 K, respectively. As in the case of ANBC, a broad hump was observed in the heat capacity of the isotropic liquid phase. The first order nature of the SmC-cubic phase transition was confirmed for the first time by the observation of supercooling of the cubic phase. The broad hump in the isotropic liquid phase was shown to extend to a low temperature side if the isotropic liquid was supercooled, suggesting that the event occurring at the hump is not directly related to the cubic-isotropic liquid phase transition.     

Lognormal Modes of Dielectric Optical Waveguides

It is shown that, at a critical point where the effective refractive index of a mode coincides with the bulk index of a cladding region, optical waveguide modes exhibiting a lognormal feature are supportable for a hyperlongrange refractive-index profile. As a typical example of waveguides that support lognormal modes a parabolic-index core surrounded by a depressed-index cladding is presented.     

Asymmetric Total Synthesis of ent‐Pyripyropene A

An asymmetric total synthesis of ent‐pyripyropene A was achieved by a convergent synthetic route. We used our originally developed Ti^III‐catalyzed radical cyclization to construct an AB‐ring portion that consisted of a trans‐decalin skeleton with five contiguous stereogenic centers. The coupling between the AB‐ring and the DE‐ring portions, and a subsequent C‐ring cyclization, led to the total synthesis of ent‐pyripyropene A. An evaluation of the insecticidal activity of ent‐pyripyropene A against two aphid species revealed that ent‐pyripyropene A was 35–175 times less active than naturally occurring pyripyropene A. This result indicated that the biological target of pyripyropene A recognizes the absolute configuration of pyripyropene A.     

Highly photoluminescent nanocrystals based on a gold(I) complex and their electrophoretic patterning

The fabrication of nanocrystals (NCs) composed of the cationic Au(I) complex was demonstrated by the reprecipitation method in which the colloidal solution of the NCs showed brilliant green phosphorescence with a quantum yield of 83% in n-hexane. Characterization of the prepared NCs was performed by transmission electron microscopy observation and elemental analysis with energy-dispersive X-ray spectroscopy. The obtained Au(I) NCs were particles of random shapes with a diameter of 200-400 nm. The selected-area electron diffraction and X-ray diffraction measurements showed the characteristic diffraction patterns attributable to the crystal structure of the bulk crystal of the Au(I) complex. A similar method was performed with a different counteranion, leading to a colloidal solution of the microcrystals (MCs) with brilliant yellow phosphorescence and a quantum yield of 26% in n-hexane. Luminescence patterning of the NCs and MCs was also achieved successfully by electrophoretic deposition onto an indium tin oxide (ITO)-coated glass substrate, resulting in characteristic luminescence patterns on the ITO substrates with relatively high photoluminescence quantum yields.     

Cyanide-bridged [Fe8M6] clusters displaying single-molecule magnetism (M=Ni) and electron-transfer-coupled spin transitions (M=Co)

Cyanide‐bridged metal complexes of [Fe₈M₆(μ‐CN)₁₄(CN)₁₀ (tp)₈(HL)₁₀(CH₃CN)₂][PF₆]₄?n CH₃CN?m H₂O (HL=3‐(2‐pyridyl)‐5‐[4‐(diphenylamino)phenyl]‐1H‐pyrazole), tp^?=hydrotris(pyrazolylborate), 1 : M=Ni with n=11 and m=7, and 2 : M=Co with n=14 and m=5) were prepared. Complexes 1 and 2 are isomorphous, and crystallized in the monoclinic space group P2₁/n. They have tetradecanuclear cores composed of eight low‐spin (LS) Fe^III and six high‐spin (HS) M^II ions (M=Ni and Co), all of which are bridged by cyanide ions, to form a crown‐like core structure. Magnetic susceptibility measurements revealed that intramolecular ferro‐ and antiferromagnetic interactions are operative in 1 and in a fresh sample of 2 , respectively. Ac magnetic susceptibility measurements of 1 showed frequency‐dependent in‐ and out‐of‐phase signals, characteristic of single‐molecule magnetism (SMM), while desolvated samples of 2 showed thermal‐ and photoinduced intramolecular electron‐transfer‐coupled spin transition (ETCST) between the [(LS‐Fe^II)₃(LS‐Fe^III)₅(HS‐Co^II)₃(LS‐Co^III)₃] and the [(LS‐Fe^III)₈(HS‐Co^II)₆] states.     

Photochemical activation of ruthenium(II)-pyridylamine complexes having a pyridine-N-oxide pendant toward oxygenation of organic substrates

Ruthenium(II)-acetonitrile complexes having η(3)-tris(2-pyridylmethyl)amine (TPA) with an uncoordinated pyridine ring and diimine such as 2,2'-bipyridine (bpy) and 2,2'-bipyrimidine (bpm), [Ru(II)(η(3)-TPA)(diimine)(CH(3)CN)](2+), reacted with m-chloroperbenzoic acid to afford corresponding Ru(II)-acetonitrile complexes having an uncoordinated pyridine-N-oxide arm, [Ru(II)(η(3)-TPA-O)(diimine)(CH(3)CN)](2+), with retention of the coordination environment. Photoirradiation of the acetonitrile complexes having diimine and the η(3)-TPA with the uncoordinated pyridine-N-oxide arm afforded a mixture of [Ru(II)(TPA)(diimine)](2+), intermediate-spin (S = 1) Ru(IV)-oxo complex with uncoordinated pyridine arm, and intermediate-spin Ru(IV)-oxo complex with uncoordinated pyridine-N-oxide arm. A Ru(II) complex bearing an oxygen-bound pyridine-N-oxide as a ligand and bpm as a diimine ligand was also obtained, and its crystal structure was determined by X-ray crystallography. Femtosecond laser flash photolysis of the isolated O-coordinated Ru(II)-pyridine-N-oxide complex has been investigated to reveal the photodynamics. The Ru(IV)-oxo complex with an uncoordinated pyridine moiety was alternatively prepared by reaction of the corresponding acetonitrile complex with 2,6-dichloropyridine-N-oxide (Cl(2)py-O) to identify the Ru(IV)-oxo species. The formation of Ru(IV)-oxo complexes was concluded to proceed via intermolecular oxygen atom transfer from the uncoordinated pyridine-N-oxide to a Ru(II) center on the basis of the results of the reaction with Cl(2)py-O and the concentration dependence of the consumption of the starting Ru(II) complexes having the uncoordinated pyridine-N-oxide moiety. Oxygenation reactions of organic substrates by [Ru(II)(η(3)-TPA-O)(diimine)(CH(3)CN)](2+) were examined under irradiation (at 420 ± 5 nm) and showed selective allylic oxygenation of cyclohexene to give cyclohexen-1-ol and cyclohexen-1-one and cumene oxygenation to afford cumyl alcohol and acetophenone.     

Analytic energy gradient for second-order Møller-Plesset perturbation theory based on the fragment molecular orbital method

The first derivative of the total energy with respect to nuclear coordinates (the energy gradient) in the fragment molecular orbital (FMO) method is applied to second order M?ller-Plesset perturbation theory (MP2), resulting in the analytic derivative of the correlation energy in the external self-consistent electrostatic field. The completely analytic energy gradient equations are formulated at the FMO-MP2 level. Both for molecular clusters (H(2)O)(64) and a system with fragmentation across covalent bonds, a capped alanine decamer, the analytic FMO-MP2 energy gradients with the electrostatic dimer approximation are shown to be complete and accurate by comparing them with the corresponding numeric gradients. The developed gradient is parallelized with the parallel efficiency of about 97% on 32 Pentium4 nodes connected by Gigabit Ethernet.     

Selective photoinduced energy transfer from a thiophene rotaxane to acceptor

An energy transfer process was investigated using cyclodextrin-oligothiophene rotaxanes (2T-[2]rotaxane). The excited energy of 2T-[2]rotaxane is transferred to the sexithiophene derivative which is included in the cavity of β-CD stoppers of 2T-[2]rotaxane.     

Molecular Design of Polyoxometalate-Based Compounds for Environmentally-Friendly Functional Group Transformations: From Molecular Catalysts to Heterogeneous Catalysts

This review article summarizes our recent researches for molecular design of polyoxometalates (POMs) and their related compounds for environmentally-friendly functional group transformations. The divacant POM [γ-SiW₁₀O₃₄(H₂O)₂]⁴⁻ exhibits high catalytic performance for mono-oxygenation-type reactions including epoxidation of olefins and allylic alcohols, sulfoxidation, and hydroxylation of organosilanes with H₂O₂. We have successfully synthesized several POM-based molecular catalysts (metal-substituted POMs) with controlled active sites by the introduction of metal species into the divacant POM as a “structural motif”. These molecular catalysts can efficiently activate H₂O₂ (vanadium-substituted POM for epoxidation) and alkynes (copper-substituted POM for click reaction and oxidative homocoupling of alkynes). The aluminum-substituted POM exhibits Lewis acidic catalysis for diastereoselective cyclization of (+)-citronellal to (−)-isopulegol. In addition, we have developed POM-based “molecular heterogeneous catalysts” by the “solidification” and “immobilization” of catalytically active POMs.