Three dimensional gain analysis of free electron laser with focusing permanent magnet wiggler

A three dimensional simulation software system developed to estimate a free electron laser (FEL) gain has been applied to FEL using a standard plane polarized wiggler and an alternately shifted magnet wiggler. It is seen for the latter wiggler that a large filling factor could be selected and each maximum gain corresponding to each orbit of electron beam concentrates at a certain frequency region of FEL radiation. It is, therefore, implied that a proper shift between the adjacent magnets in the wiggler produces the improvement of the FEL gain.     

Coulometric titration of copper in CuxMo6S8−y(0⩽y⩽0.4) with solid Cu-electrolyte Rb4Cu16I7Cl13

In order to determine the copper content x of copper Chevrel compound Cu_xMo₆S_8?y(0?y?0.4) as a function of copper activity a_Cu and sulfur deficit y, a solid state electrochemical cell, Cu/Rb₄Cu₁₆I₇Cl₁₃/Cu_xMo₆S_8?y/Pt, was constructed and coulometric titration studies were made at 400 K. For the evaluation of the coulometric titration data, measurements were made on the electronic conductivity of copper-ion conductor Rb₄Cu₁₆I₇Cl₁₃. Also, a brief investigation was made on the condition of formation of single phase Chevrel Cu_xMo₆S_8?y with varying x and y at 1000°C. The structural change of Cu_xMo₆S_8?y with a change in x and y was studied by the X-ray diffraction method. It was found that x for constant a_Cu decreases with increasing y. The maximum value x_max of x in Cu_xMo₆S_8?y in equilibrium with metallic copper was found to be expressed by $\text{x}{}_{\mathrm{<mtext>max</mtext>}}\text{=-(}\text{10}\text{3}\text{)y+5}$. In the region of y<0.3, x_max exceeded 4, contrary to a presupposition that x_max is less than 4. X-ray analysis revealed that most of the copper Chevrel compounds denoted by Cu_xMo₆S₈ so far were sulfur deficient ones with y?0.4. The importance of sulfur deficit on the properties of the copper Chevrel compound was emphasized.     

Fast Optical Switching Using Oriented Cyanine Dye-Doped Nematic Liquid Crystal

A cyanine dye, 2-[7-（1,3-dihydro-1,3,3-trimethyl-2H-indol-2-ylidene）-1,3,5-heptatrienyl]-1,3,3-trimethyl-3H-indolium iodide （NK-125）, is doped in 4-cyano-4＇-pentylbiphenyl （5 CB）, and the mixture is sandwiched between two pieces of rubbed glass plates. The third-order nonlinear optical properties of the oriented NK-125-SCB layers are measured by the resonant femtosecond degenerate four-wave mixing （DFWM） technique at 760 nm. The third-order nonlinear optical susceptibility of one of the present samples is 5.5×10^-8 esu. The slow DFWM response of the NK-125-SCB layers due to a population grating is accelerated by the increasing laser power because of amplified spontaneous emission （ASE）. On the other hand, we do not observe a similar phenomenon for NK-125- polyethylene glycol （PEG-400）. Oriented NK-125 molecules in nematic liquid crystals must have very high ASE efficiency. Hence the population grating in a DFWM signal disappears within about 4 ps. It is expected that NK-125-SCB can be used as a material for very fast all-optical switching.     

Synthesis of C12-Keto Saxitoxin Derivatives with Unusual Inhibitory Activity Against Voltage-Gated Sodium Channels

A novel series of C12-keto-type saxitoxin (STX) derivatives bearing an unusual nonhydrated form of the ketone at C12 has been synthesized, and their Na_V-inhibitory activity has been evaluated in a cell-based assay as well as whole-cell patch-clamp recording. Among these compounds, 11-benzylidene STX ( 3 a ) showed potent inhibitory activity against neuroblastoma Neuro 2A in both cell-based and electrophysiological analyses, with EC₅₀ and IC₅₀ values of 8.5 and 30.7 nm , respectively. Interestingly, the compound showed potent inhibitory activity against tetrodotoxin-resistant subtype of Na_V1.5, with an IC₅₀ value of 94.1 nm . Derivatives 3 a – d and 3 f showed low recovery rates from Na_V1.2 subtype (ca 45–79 %) compared to natural dcSTX ( 2 ), strongly suggesting an irreversible mode of interaction. We propose an interaction model for the C12-keto derivatives with Na_V in which the enone moiety in the STX derivatives 3 works as Michael acceptor for the carboxylate of Asp¹⁷¹⁷.     

Dependence on substrate topography of growth of nanosized dendritic structures in an electron-beam-induced deposition process

Nanometer-sized W-dendrites are fabricated on Al₂O₃ substrates with an electron-beam-induced deposition process. Dependence of growth of nanodendrite on surface topography is investigated with transmission electron microscopy. It is confirmed that the nanodendrite grows on convex surfaces but not around a hole on a substrate. These are attributed to different distribution of charges on surfaces with different topographies during electron beam irradiation when charges are produced on the surface due to emission of second electrons. The charges accumulate on convex surface and do not distribute around a hole. Therefore, the nanodendrite grows on the former and not on the latter.     

A new dual-type DMA for measuring nanoparticles emitted from combustion engines

A new dual-type differential mobility analyzer (dual-type DMA) was developed in order to detect transient number concentrations of airborne nanoparticles with diameters centralized at around 10 nm (for nuclei mode particles) and 100 nm (for accumulation mode particles) in automobile exhaust gas. The apparatus divides the gas sample into two parts, and each part is sent through one of two coaxially nested sections for analysis. For the scanning mode measurement, the nanoparticles are charged by ²⁴¹Am and their size distributions are determined by varying the applied voltage over 2 min. The transient mode measurement, on the other hand, fixes the voltages for the two sections at peaks near 10 and 100 nm in order to monitor the transient behavior of the exhaust nanoparticles. The measurement principles and design of the dual-type DMA are detailed and the results for time response experiments are presented using model nanoparticles charged by a corona charger. The transient concentrations of the nuclei mode and the accumulation mode particles from a diesel engine were shown to be detected by this method, when ²⁴¹Am was used for charging the particles.     

Photorefractive effect in the relaxor ferroelectric material 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3

The photorefractive effect in a nominally undoped 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 single crystal is measured. We report what is, to our knowledge, the first observation of the photorefractive effect in Pb-based relaxor ferroelectric crystals. The crystal is grown by the flux solution method. Then it is cut into a 2 mm x 4 mm x 8 mm piece and electrically poled along the [111] direction. The coupling constant of the two-wave mixing is 17 cm(-1), and the normalized time constant under 1-W/cm(2) illumination is 12 s at a wave-length of 476 nm. The effective trap density is calculated as 5 x 10(16) cm(-3) from the Debye screening length under the assumption of Kukhtarev's band-transport model. The dominant carrier is identified to be holes from the direction of two-wave mixing energy transfer.     

Characterization of equilibrium strategies in a class of difference games

We formulate a class of N player difference games and derive open—loop and Markov equilibria. It turns out that both types of equilibria can be characterized by a set of difference equations that describe the equilibrium dynamics. We analyze the stability properties of the difference equations that correspond to an equilibrium and find that in both the open—loop and the Markov game there is convergence towards a steady state equilibrium     

Helical Carbon and Graphite Films Prepared from Helical Poly(3,4‐ethylenedioxythiophene) Films Synthesized by Electrochemical Polymerization in Chiral Nematic Liquid Crystals

Helical carbon and graphite films from helical poly(3,4‐ethylenedioxythiophene) (H‐PEDOT) films synthesized through electrochemical polymerization in a chiral nematic liquid‐crystal (N*‐LC) field are prepared. The microscope investigations showed that the H‐PEDOT film synthesized in the N*‐LC has large domains of one‐handed spiral morphology consisting of fibril bundles. The H‐PEDOT films exhibited distinct Cotton effects in circular dichroism spectra. The highly twisted N*‐LC with a helical pitch of smaller than 1 μm produced the H‐PEDOT film with a highly ordered morphology. The spiral morphologies with left‐ and right‐handed screws were observed for the carbon films prepared from the H‐PEDOT films at 800 °C and were well correlated with the textures and helical pitches of the N*‐LCs. The spiral morphologies of the precursors were also retained even in the graphite films prepared from the helical carbon films at 2600 °C.     

In vitro translation with [<Superscript>34</Superscript>S]-labeled methionine,selenomethionine, and telluromethionine

Heteroisotope and heteroatom tagging with [³⁴S]-enriched methionine (Met), selenomethionine (SeMet), and telluromethionine (TeMet) was applied to in vitro translation. Green fluorescent protein (GFP) and JNK stimulatory phosphatase-1 (JSP-1) genes were translated with wheat germ extract (WGE) in the presence of Met derivatives. GFPs containing Met derivatives were subjected to HPLC coupled with treble detection, i.e., a photodiode array detector, a fluorescence detector, and an inductively coupled plasma mass spectrometer (ICP-MS). The activities of JSP-1-containing Met derivatives were also measured. GFP and JSP-1 containing [³⁴S]-Met and SeMet showed comparable fluorescence intensities and enzyme activities to those containing naturally occurring Met. TeMet was unstable and decomposed in WGE, whereas SeMet was stable throughout the experimental period. Thus, although Te was the most sensitive to ICP-MS detection among S, Se, and Te, TeMet was less incorporated into the proteins than Met and SeMet. Finally, the potential of heteroisotope and heteroatom tagging of desired proteins in in vitro translation followed by ICP-MS detection was discussed. Figure TeMet was less incorporated into GFP than Met and SeMet due to its instability in WGE