Influence of drawing and heat treatment on surface free energies of polyethylene terephthalate fibers

The surface free energies of polyethylene terepthalate fibers with different draw ratios were experimentally determined by contact angle measurements inn-alkane/water systems. The dispersive component of the surface free energy increased with increasing draw ratio, whereas the nondispersive one remained almost constant. After heat treatment, the dispersive surface free energy increased, but was reduced above 140°C. The nondispersive component increased by heat treatment at 190°C. The increases in the density and birefringence of the fibres due to the drawing and heat treatment suggested that the increase in the dispersive surface free energy was caused by the increase in the atomic density at the fiber surface due to drawing and heat treatment. ESCA results indicated that the increment in the nondispersive surface free energy due to heat treatment was caused by the addition of functional groups to the fiber surface due to heat treatment.     

Reactions of group IV organometallic compounds : XXVII. Some reactions of [(trimethylsilyl)imino]phosphorane

The reaction of [(trimethylsilyl)imino]methyldiphenylphosphorane: Ph₂MePNSiMe₃ (I) with several acid anhydrides or alkyl isocyanates took place by the simple cleavage of silicon-nitrogen bond. In contrast the interaction of (I) with phenyl isocyanate, isothiocyanate or carbon disulphide led to addition-elimination reactions of the Wittig type. Detailed investigation in the case of phenyl isocyanate indicated the usual elimination of Ph₂MePO is suppressed by the strong affinity of the trimethylsilyl group for anionic oxygen atom.     

Highly Selective Separation of Rhodopsin from Bovine Rod Outer Segment Membranes Using Combination of Divalent Cation and Alkyl(thio)glucoside

The micellization process of bovine rod outer segment (ROS) membranes is investigated utilizing a series of neutral detergents. It is found that when alkyl(thio)glucosides with an appropriate hydrophilic–lipophilic balance (e.g. octylthioglucoside) are used in combination with a divalent cation, rhodopsin is selectively extracted from ROS membranes at a specific detergent-to-membrane ratio. This allows remarkable purification of rhodopsin by a single-step solubilization, because the residual membranes are heavily aggregated in the presence of divalent cation and are therefore easily sedimented by low-speed centrifugation. The absorption spectrum of the supernatant reproducibly exhibits an A₂₈₀/A₅₀₀ value of 1.6, an excellent value that could rarely be obtained by chromatographic purification. The degree of purification also depends on the type of divalent cation included in the solubilization solution; specific binding of IIB-series cations (Zn²⁺ and Cd²⁺) to ROS membranes is suggested to play an important role in the solubilization process. The present result represents a unique example of selective solubilization of a specific membrane protein from highly aggregated membranes.     

Dual-oriented thin crystals of molybdenum grown under Ar+ ion bombardment

Ar⁺ sputtering of an Cu(111) surface while simultaneously supplying Mo atoms is known to induce an oriented growth of Mo thin crystals, or seed-layers, on evolving conical Cu protrusions. The seed-layers thus formed are shown to be dual-oriented, or bicrystalline, consisting of columnar crystallites grown homo-epitaxially. The orientation relationship between the two types of crystallites was (100)_I (111)_II with [001]_I [110]_II, and this bicrystallinity probably resulted from a non-uniform charge-up of the layers' growth front. As concluded from high-resolution electron microscopy, the Mo(100) stacking is elastically converted into the Mo(111) stacking and vice versa, under the influence of tensile stress. The homo-epitaxy that the seed-layers exhibited is believed to reflect the mutual convertibility of the Mo(100) and (111) stackings.     

Determination of the chiral structure of [Formula: see text] using anomalous x-ray scattering near the Cs K absorption edge

A structural study of [Formula: see text], grown from aqueous solution, was performed using anomalous x-ray scattering near the Cs K absorption edge to determine an absolute configuration of constituent atoms. The sense of the helical structure of the [Formula: see text] chain was found to be predominantly right-handed through a comparison of observed Bragg Bijvoet ratios with calculated ones. Assuming that [Formula: see text] consists of the two domains (i.e. right- and left-handed helices), we estimate that the volume fraction for the right-handed helix is [Formula: see text].     

Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

Novel one-dimensional tubelike and two-dimensional polycatenated metal-organic frameworks

Two novel metal-organic frameworks (MOFs) [Zn(TITMB)(OAc)](OH).8.5H(2)O (1) and [Ag(TITMB)N(3)].H(2)O (2) [TITMB = 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, OAc = acetate anion] were synthesized and their structures were determined by X-ray crystallography. Complex 1 crystallizes in tetragonal space group P(-)4 with a = 23.2664(7) and c = 11.9890(3) A and Z = 8. 1 has a one-dimensional tubelike structure with large inner pore size of approximately 17 A. Complex 2 crystallizes in monoclinic space group C2 with a = 20.7193(10), b = 11.5677(8), and c = 12.2944(6) A, beta = 125.5770(10) degrees, and Z = 4. 2 consists of two-dimensional honeycomb networks that interpenetrate each other to generate a polycatenated structure. In these two complexes, both zinc(II) and silver(I) atoms are four-coordinated with the same tetrahedral coordination geometry. The topologies of 1 and 2 are predominated by the conformations of TITMB, which are cis, trans, trans in 1 and cis, cis, cis in 2, respectively.     

Selective foam separation of binary protein solution by SDS complexation method

A fundamental study about the selective foam separation of protein mixture was carried out. A solution containing two proteins, ovalbumin (OA) and lysozyme (LZ), and an anionic surfactant, sodium dodecyl sulfate (SDS), was adjusted to pH 6.0, which referred to an intermediate state between the isoelectric points of the proteins. The solution was processed by continuous foam separation. The results showed that a proper addition of SDS greatly improved the selective recovery of LZ to OA. The experimental data were well explained by a simple model that most of cationic protein molecules (LZ) are associated with SDS and the adsorption of all the species including LZ-SDS complexes are subjected to Langmuir adsorption isotherm. The results also showed that one of the Langmuir parameters, which means a kind of lyophillic property of adsorbed material, of LZ-SDS complexes was extremely large as compared with that of primary protein.