Cloud and aerosol contributions to variation in shortwave surface irradiance over East Asia in July during 2001 and 2007

It is important to clarify the contributions of clouds and aerosols to the variation of surface shortwave irradiance (S) for climatological studies. This study examined the contributions of clouds and aerosols to the variation in S over East Asia (75-135°E, 20-55°N) in July during 2001 and 2007 using the index of potential radiative forcing (PRF) to characterize the temporal and geographical variations. After confirming the validity of PRF for multiyear analyses, we performed several temporal analyses of clouds and aerosols over the whole research domain. Changes in the geographical distribution, contribution histograms, and averaged values were studied. In agreement with previous studies that treated single-year cases, we confirmed that the magnitudes of the temporal changes in S variations due to clouds and aerosols were highly variable geographically. As for domain-averaged S variations, we did not observe defined trends for the research period. It was also found that the temporal variation between one parameter and its S variation was negatively correlated, from the point analyses at two locations. Based on these results, we concluded that PRF is a promising tool for research into long-term S variations. This kind of information will be quite valuable as basic data for use in climate modeling.     

Continuous-wave diode-pumped laser action of Nd³⁺-doped photo-thermo-refractive glass

Laser action of the photo-thermo-refractive (PTR) glass, which is the photosensitive material for holographic recording of volume Bragg gratings (VBGs), was demonstrated for the first time by introducing Nd3?. Nd:PTR glass has a bandwidth of 27.8 nm and 16.0 nm for luminescence and absorption, respectively. An uncoated 2 mm thick Nd:PTR element generated cw laser output of 124 mW, with a slope efficiency of 25%, by laser diode pumping. This Nd:PTR glass also performed wide bandwidth laser action at 1053.9-1063.3 nm, where the decrease of the pump-absorption efficiency was held off below 30%, even under a 3.5 nm shift of pump wavelength from its absorption center.     

Characterization of chemiluminescence from singlet oxygen under laminar flow conditions in a micro-channel and its quenching with beverages

Singlet oxygen was generated by reaction of sodium hypochlorite and hydrogen peroxide in a micro-channel. The two reagent solutions were delivered into the micro-channel by a syringe pump, providing a laminar flow liquid-liquid interface. The chemiluminescence from the singlet oxygen was emitted in the collapse of the interface due to molecular diffusion under laminar flow conditions. The chemiluminescence intensity was observed continuously and stably for each combination of reagents fed into the micro-channel; while, in the normal batch-type reactor the chemiluminescence peaks from singlet oxygen were observed within ca. 5 s. The features of the chemiluminescence emitted under laminar flow conditions were examined by changing the concentrations of sodium hypochlorite and hydrogen peroxide; the concentrations of 2.5 mM sodium hypochlorite and 7.5 mM hydrogen peroxide provided highest chemiluminescence intensities without bubble formation. Also, the effects of beverages, such as green tea, coffee, white wine, red wine, and sake (rice wine), on the chemiluminescence intensity as well as the concentrations of sodium hypochlorite and hydrogen peroxide were examined. The chemiluminescence intensities observed with addition of the beverages to the reagents decreased in the following orders; green tea > coffee > red wine > rice wine > white wine (being added to sodium hypochlorite); coffee > white wine > green tea > red wine > rice wine (being added to hydrogen peroxide). It was found that coffee decreased the chemiluminescence intensity (ca. 33% chemiluminescence decrease) without altering the concentrations of sodium hypochlorite or hydrogen peroxide. The cause of the decrease in chemiluminescence with coffee is discussed.     

2-Pyridone and 3-oxo-1,2,6-thiadiazine-1,1-dioxide derivatives: a new class of hydrogen bond equivalents of uracil

Hydrogen bond complex stability between adenine (A) and hydrogen bond equivalents of uracil: 2-pyridone derivatives (U^X _X2O) and 3-oxo-1,2,6-thiadiazine-1,1-dioxide derivatives (U^X _SO2) was studied, and as the result, the hydrogen bond energy of U^X _X2O-A and a complex of UX^X _SO2-A, was about 1.5 kcal/mol more stable than that of the corresponding adenine-uracil derivatives complex, respectively. The energy difference between the imide tautomer and enol tautomer was smaller than those of uracil derivatives. U^F _SO2 can form a stable complex with A, and its imide tautomer is stable.     

Synthesis and Cation-Binding Properties of (1→6)-2,5-Anhydro-D-glucitol with 3,4-Di-O-Pentyl and Decyl Groups by Cyclopolymerization of 1,2:5,6-Dianhydro-D-mannitols

Abstract

The cyclopolymerizations of 1,2:5,6-dianhydro-3,4-di-O-pentyl-D-mannitol (1b) and 1,2:5,6-dianhydro-3,4-di-O-decyl-D-mannitol (1c) were carried out using BF₃OEt₂ and t-BuOK. All the resulting polymers consisted of cyclic constitutional units, i.e., the extent of cyclization was 100%. The polymer structures for the polymerization with t-BuOK were (1→6)-2,5-anhydro-3,4-di-O-pentyl-D-glucitol (2b) and (1→6)-2,5-anhydro-3,4-di-O-decyl-D-glucitol (2c), whereas those with BF₃O-decyl₂ comprised 2,5-anhydro-D-glucitols as major units along with other cyclic ones. These polymers were soluble in n-hexane, CHCl₃, and THF, but insoluble in water, which differs from the amphiphilic solubility of (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitol (2a). The cation-binding properties of 2b and 2c were examined using alkali-metal picrates in order to compare them with those of 2a. The extraction yields for each cation decreased in the order of 2c < 2b < 2a. Every polymer exhibited a similar cation-binding selectivity in the order Cs⁺ > Rb⁺ > K⁺ ? Na⁺ > Li⁺. The ratio of K⁺ and Na⁺, K⁺/Na⁺, was 4.6 for 2a, 5.1 for 2b, and 7.1 for 2c in the increasing order 2a < 2b > 2c.     

Accurate and rapid estimation on spectral interferences in routine analysis by ICP-AES: use of mutual interference coefficients

A practical method to estimate spectral interferences and to select optimum analytical lines in ICP-AES is suggested. Depending on the matrix composition and the amounts of the analyte, the analytical lines suffering from little interferences and the limit of determination can be determined from calculation using spectral interference coefficients. For this calculation, the spectral interference coefficients, which are defined as apparent mass of the analyte equivalent to the spectral interference from unit mass of the interferent, are obtained experimentally for 639 emission lines of 68 elements. There is a good correlation between the coefficients obtained on two spectrometers having different resolutions.     

Capsule–Capsule Conversion by Guest Encapsulation

Guest‐induced M₁₈L₆–M₂₄L₈ capsule–capsule conversion is reported. Both capsules are composed of Pd^II ethylenediamine units (M) and 1,3,5‐tris(3,5‐pyrimidyl)pyrimidine (L), and form trigonal bipyramidal (M₁₈L₆) and octahedral (M₂₄L₈) closed‐shell structures with huge hydrophobic inner spaces. The M₁₈L₆ trigonal bipyramid is converted to the M₂₄L₈ octahedron through encapsulation of large aromatic guests, with the latter capsule possessing a cavity volume three times larger than the former. Despite the dynamic properties of the capsule host, the encapsulated guests are difficult to extract and are thus isolated from the external environment.     

High-energy quasi-phase-matched optical parametric oscillation in a periodically poled MgO:LiNbO3 device with a 5 mm x 5 mm aperture

Fabrication of a 5 mm thick periodically poled MgO-doped LiNbO3 device with a 32.1 microm period for mid-infrared generation was demonstrated. The periodic structure was evaluated by measurement of second-harmonic generation with the d31 coefficient. Optical parametric oscillation using this device with an uncoated 5 mm x 5 mm aperture and a 36 mm effective length realized a high-energy output of 77 mJ for both signal (wavelength 1.83 microm) and idler (2.54 microm) waves with a 72% slope efficiency at 110 mJ pumping of a Q-switched Nd:YAG laser with a 12 ns pulse duration.     

4-(Pyrrolidinyl)methoxybenzoic acid derivatives as a potent, orally active VLA-4 antagonist

A novel series of benzoic acid derivatives as VLA-4 antagonists were synthesized. Optimization, focusing on activity and lipophilicity needed for cell permeability, resulted in the identification of 15b and 15e with good activity (IC50 = 1.6 nM each) and moderate lipophilicity (Log D = 2.0, 1.8). Furthermore, 15e demonstrated efficacy in murine asthma model by an oral dose of 30 mg/kg.     

Decoupling of the N-soliton solution for a new discrete MKdV equation

We prove that the N-soliton solution for a new discrete MKdV equation can be decoupled into N components. These components satisfy the interacting new discrete MKdV equation, and approach single soliton solutions as t→∞. We present concrete expressions of soliton components in the case of N = 2, and illustrate the results.