Swelling of poly(ethylene oxide) gel in aqueous solutions of sodium dodecyl sulfate with added sodium chloride

The swelling behavior of poly(ethylene oxide) (PEO) gels in aqueous solutions of sodium dodecyl sulfate (SDS) with and without NaCl was investigated. In the absence of NaCl, PEO gels with different degrees of cross-linking began to swell from a concentration lower than the critical micelle concentration (cmc) of SDS, then showed sigmoidal enhancements of swelling in a higher SDS concentration region until the degrees of swelling reached maximum values. The SDS concentration at which the swelling began to appear was in reasonable agreement with the critical aggregation concentration (cac) value reported for the aqueous PEO system. For the cases where NaCl was present, the swelling behavior of PEO gel was different from that when NaCl was absent in the following way. The concentrations where the swelling begins to appear, and hence those where the degree of swelling rises steeply, decreased with an increase in NaCl concentration. The ultimate degrees of swelling at higher concentration regions also decreased with an increase in the NaCl concentration. The lowering of the SDS concentrations at which the PEO gel began to swell is in line with the decreases in the cmc of SDS solutions containing NaCl and also with the decreases in the cac of PEO solution. Electronic Publication     

A Thermal And Structural Study on Lanthanum Hexacyanocobaltate(III) Pentahydrate. Part II

The thermal dehydration of La[Co(CN)₆]⋅5H₂O proceeded through at least three stages from the temperature range of30~230°C, and an abrupt mass loss occurred around 350°C and the perovskite type oxide,LaCoO₃ was obtained at 1000°C. After dehydration, the color of the anhydride changed from white to pale blue around 230°C and furthermore, the color changed to blue around 290°C. These color changes were discussed on the basis of the changes of coordination structures around Co ions. In La[Co(CN)₆]⋅5H₂O, Co³⁺ ions lie at the center of the O_h crystal field consisted of six CN^– ions. However, in the pale blue specimen, Co³⁺ ions were situated in the center of D_4h crystal field which was distorted the O_h one by lengthening of the trans CN^– ions along z-axis. In the blue specimen, Co³⁺ ions were reduced to Co²⁺ ions which were situated in the T_d crystal field formed by four CN^–ions as [Co(CN)₄]^2–. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and properties of amino acid esters of hydroxypropyl cellulose

The amino acid esters of hydroxypropyl cellulose (HPC) [R′ = H ( 2a ), CH₃ ( 2b ), CH₂CH(CH₃)₂ ( 2c ), CH₂CONH₂ ( 2d ), CH₂CH₂CONH₂ ( 2e ), CH₂CH₂CH₂CH₂ NHOCOC(CH₃)₃ ( 2f )] were synthesized in good yield by the reaction of t‐butoxycarbonyl (t‐Boc)‐protected amino acids with hydroxy groups of HPC ( 1 ; molar substitution (MS), 4.61). The amino acid functionalities displaying varied chemical nature, shape, and bulk were utilized and the bulk of the substituent on the α‐carbon of amino acids was elucidated to be of vital significance for the observed degree of incorporation (DS_Est). The ¹H NMR spectra and elemental analysis were employed to determine the degree of incorporation of amino acid moiety (DS_Est) and almost complete substitution of the hydroxy protons was revealed for 2a , 2b , and 2f . The presence of the peaks characteristic of the carbonyl group in the FTIR spectra furnished further evidence for the successful esterification of HPC. The starting as well as the resulting polymers ( 1 and 2a – f ) were soluble in polar organic solvents; however, the esterification of 1 with bulky organic moieties resulted in an increased hydrophobicity as all of the amino acid‐functionalized polymers ( 2a – f ) were insoluble in water. The onset temperatures of weight loss of 2a – f were 175–230 °C, indicating fair thermal stability. The amino acid functionalization led to the enhanced polymer chain stiffness, and the glass transition temperatures of the derivatized polymers were 30–40 °C higher than that of 1 (T_g 3.9 °C; cf. T_g of 2a – f , 35.1–43.3 °C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2326–2334, 2008     

Synthesis and chiral recognition properties of poly(N‐propargylamide) gels derived from ornithine and lysine

Copolymerization of ornithine‐ and lysine‐derived N‐propargylamides, N‐α‐tert‐butoxycarbonyl‐N‐δ‐fluorenylmethoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 1 ), N‐α‐tert‐butoxycarbonyl‐N‐ε‐fluorenylmethoxycarbonyl‐L ‐lysine N′‐propargylamide ( 2 ), N‐α‐fluorenylmethoxycarbonyl‐N‐δ‐tert‐butoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 3 ), and N‐α‐fluorenylmethoxycarbonyl‐N‐ε‐tert‐butoxycarbonyl‐L ‐lysine N′‐propargylamide (4) with dipropargyl adipate was carried out using (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] as a catalyst in THF to obtain polymer gels in 80–93% yields. The gels adsorbed N‐benzyloxycarbonyl L ‐alanine, N‐benzyloxycarbonyl L ‐alanine methyl ester, and (S)‐(+)‐1‐phenyl‐1,2‐ethanediol preferably than the corresponding optical isomers. The order of chiral discrimination was poly( 1 ) > poly( 4 ) > poly( 2 ), poly( 3 ) gels. The fluorenylmethoxycarbonyl groups of the gels could be partly removed by piperidine treatment, leading to increase of adsorptivity but decrease of chiral recognition ability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4175–4182, 2008     

Approximate innerness and central triviality of endomorphisms

We introduce the notions of approximate innerness and central triviality for endomorphisms on separable von Neumann factors, and we characterize them for hyperfinite factors by Connes-Takesaki modules of endomorphisms and modular endomorphisms which are introduced by Izumi. Our result is a generalization of the corresponding result obtained by Kawahigashi-Sutherland-Takesaki in automorphism case.     

Syndiotactic‐specific radical polymerization of N,N‐dimethylacrylamide in the presence of tartrates: A proposed mechanism for the polymerization

Radical polymerization of N,N‐dimethylacrylamide (DMAAm) was investigated in the presence of tartrates, such as diethyl L ‐tartrate, diisopropyl L ‐tartrate, and di‐n‐butyl L ‐tartrate, in toluene at low temperatures. Syndiotactic polymers were obtained in the presence of tartrates, whereas isotactic polymers were obtained in the absence of tartrates. The syndiotactic‐specificity increased with increasing amount of tartrates and with decreasing polymerization temperature. NMR analysis suggested that DMAAm and tartrates formed a 1:1 complex through double hydrogen bonding. A mechanism for the syndiotactic‐specific radical polymerization of DMAAm is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1192–1203, 2009     

Asymmetric reduction of aromatic ketimines in the presence of helical polymer as catalyst

Novel optically active ethynyl monomers were synthesized from L ‐valine and N‐methyl‐L ‐valine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights over 200,000 in good yields. The CD and UV‐vis spectra of the polymers indicated that they took helical structures with predominantly one‐handed screw sense in solution. The polymers served as catalysts of asymmetric reduction of aromatic ketimines to afford optically active amines in moderate yields. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4971–4981, 2009     

Tin oxide coating on polytetrafluoroethylene films in aqueous solutions

Polytetrafluoroethylene (PTFE) films were successfully coated with tin oxide in aqueous solutions. Tin oxide was crystallized in the solution and formed nanocrystal coatings on the polymer films. The coatings consisted of SnO₂ and SnO crystals. They were assemblies of tin oxide nanosheet of about 10 to 50 nm in size and about 5 nm in thickness. The nanocrystal films can be exfoliated from the PTFE substrates. Tin oxide nanocrystal films had a rough liquid surface and a dense substrate‐side surface. Transparency of PTFE films coated with tin oxide was same as that of bare PTFE films in the range from 400 to 800 nm. The PTFE films coated with tin oxide nanocrystals can be pasted on desired substrates. Copyright © 2009 John Wiley & Sons, Ltd.     

Confinement Effect of Organic Nanotubes Toward Green Fluorescent Protein (GFP) Depending on the Inner Diameter Size

Transportation, release behavior, and stability of a green fluorescent protein (GFP, 3×4 nm) in self‐assembled organic nanotubes with three different inner diameters (10, 20, and 80 nm) have been studied in terms of novel nanocontainers. Selective immobilization of a fluorescent acceptor dye on the inner surface enabled us to not only visualize the transportation of GFP in the nanochannels but to also detect release of the encapsulated GFP to the bulk solution in real time, based on fluorescence resonance energy transfer (FRET). Obtained diffusion constants and release rates of GFP markedly decreased as the inner diameter of the nanotubes was decreased. An endo‐sensing procedure also clarified the dependence of the thermal and chemical stabilities of the GFP on the inner diameters. The GFP encapsulated in the 10 nm nanochannel showed strong resistance to heat and to a denaturant. On the other hand, the 20 nm nanochannel accelerated the denaturation of the encapsulated GFP compared with the rate of denaturation of the free GFP in bulk and the encapsulated GFP in the 80 nm nanochannels. The confinement effect based on rational fitting of the inner diameter to the size of GFP allowed us to store it stably and without denaturation under high temperatures and high denaturant concentrations.