Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method

Laser-induced backside wet etching (LIBWE) of silica glass plates was performed to fabricate an imprinting template for hot embossing in polymer substrates such as polystyrene and silicone resin. Well-defined inverse surface-micropatterns of gratings and grid arrays on the substrates were produced by the hot embossing using a surface-structured silica glass as the template. These results indicate that the LIBWE method allows us to generate robust glass molding tools that exhibit the inverse shapes of the intended microstructures. PACS 52.38.Mf; 68.47.Mn; 81.05.Kf; 81.05.Lg; 83.50.Uv     

A Flat Spectral Response AWG Demultiplexer Composed of Slabs with Islands and Peninsulas

Phase adjustment elements called islands and peninsulas are introduced to obtain an AWG demultiplexer with a flat spectral response. Use of the peninsulas enables us to achieve a 1dB bandwidth of 0.5 nm.     

First results from KamLAND: evidence for reactor antineutrino disappearance

KamLAND has measured the flux of nu;(e)'s from distant nuclear reactors. We find fewer nu;(e) events than expected from standard assumptions about nu;(e) propagation at the 99.95% C.L. In a 162 ton.yr exposure the ratio of the observed inverse beta-decay events to the expected number without nu;(e) disappearance is 0.611+/-0.085(stat)+/-0.041(syst) for nu;(e) energies >3.4 MeV. In the context of two-flavor neutrino oscillations with CPT invariance, all solutions to the solar neutrino problem except for the "large mixing angle" region are excluded.     

Frequency tunable beat note from a dual-polarization emitting external cavity diode laser

A method is presented to generate tunable millimetre waves by photomixing one TE mode and one TM mode of a dual-polarization external cavity diode laser emitting in the 1.55 μm wavelength domain. Beat notes in the frequency range 0.2 to 60GHz have been measured where the upper frequency is limited by the detector system bandwidth only. The frequency and amplitude stability are investigated. Typical beat intensity fluctuations are within 0.5 dB. The frequency stability is around 5MHz. The relative intensity noise of a TE and a TM mode was measured and a correlation found around multiples of the cavity roundtrip frequency and in the low frequency regime. Theoretical calculations show qualitative agreement with the measurement results. This revised version was published online in November 2006 with corrections to the Cover Date.     

Mössbauer Study of La1−x Ca x Mn1−y 57Fe y O3 with x=0,0.25; y=0.01

Temperature dependent Mössbauer measurements are done on the samples of La_1–x Ca _x Mn_1–y ⁵⁷Fe _y O₃ with x=0 and 0.25, and y=0.01. With decreasing temperature, the specimen with x=0.25 shows a paramagnetic to ferromagnetic transition around 175 K. In the specimen x=0.0, the temperature dependence of both the center shift () and the recoilless fraction (f) can be fitted very well with the Debye theory with a _D=320±50 K. But for the specimens with x=0.25, f and show distinct deviations from the Debye behavior in the temperature range in which the resistivity shows a sharp decrease. Dips observed in both the f and around the transition temperature suggest that the Jahn–Teller distortion observed in these systems is dynamic in nature.     

Laser-ionization mass-spectrometric studies on laser ablation of a nitrogen-rich polymer at 532 nm and 1064 nm

Laser-ionization Time-Of-Flight (TOF) mass-spectrometric studies have been carried out on the 532 nm and 1064 nm laser ablation products from a nitrogen-rich polymer. The polymer used had an elemental composition of C_6.0N_8.9H_3.4 and consisted of C=N, C-N, and N-H chemical bonds. The TOF mass spectra observed were composed of various peaks (150 amu) depending on the ablation laser wavelength. The primary peaks were assigned to C⁺, CN⁺, CHnN⁺ ₂ (n=1–3) and C₂H₂N⁺ ₃ for 532 nm ablation, and C⁺, C⁺ ₃, HCN⁺, HCCN⁺, CH₂NH⁺, HNCN⁺, H₃NCN⁺, and C₄H₄N⁺ ₇ for 1064 nm ablation. The flight velocity distributions with peak velocities ranging from 8.6×10³ cm/s to 3.8×10⁴ cm/s were measured for these products. The distinct velocity distributions observed between small and large products indicate the presence of two origins in the fragment ejection process from the polymer for both 532 nm and 1064 nm ablation. Furthermore, we suggest an importance of the translational energy of the fragments for the product generation in the laser plume.     

Zirconia-based planar NO2 sensor using ultrathin NiO or laminated NiO–Au sensing electrode

The nanostructured thin NiO films with the thicknesses of 30–180 nm were examined as a sensing electrode (SE) for the planar mixed-potential-type yttria-stabilized zirconia (YSZ)-based NO₂ sensor. The sensing characteristics were examined in the temperature range of 600–800 °C under the wet condition (5 vol.% water vapor). Among the NiO-SEs tested, the 60 nm-thick NiO-SE sintered at 1,000 °C was found to give the highest NO₂ sensitivity in the NO₂ concentration range of 50–400 ppm accompanying with fast response/recovery at the operating temperatures of 600–700 °C. The high NO₂ sensitivity was attributed to the high catalytic activity for both electrochemical reactions of O₂ and NO₂ at the interface of NiO-SE/YSZ. The ultrathin gold layer with the thickness of about 60 nm was additionally formed on the 60 nm-thick NiO-SE to fabricate the laminated-type (60 nm NiO/60 nm Au)-SE. It was demonstrated that the use of this laminated (NiO–Au)-SE improved both the sensitivity and the selectivity to NO₂.     

Chemical properties of water-soluble,nonionic azo compounds as initiators for emulsion polymerization

Four kinds of water-soluble, nonionic azo compounds were studied in terms of their decomposition rate and initiator efficiency in radical polymerization, and then used for emulsion polymerization. They had relatively low initiator efficiency from 0.09 to 0.46. It was attributed to the susceptibility to a cage effect, depending on their molecular size and hydrophobicity. Four azo compounds initiated emulsion polymerization but nonionic latex particles were not obtained unexpectedly. Methanol-containing medium results in the formation of a bimodal particle size distribution as well as a bimodal molecular weight distribution. © 1996 John Wiley & Sons, Inc.