Cloning, sequencing, and functional analysis of the biosynthetic gene cluster of macrolactam antibiotic vicenistatin in Streptomyces halstedii

Vicenistatin, an antitumor antibiotic isolated from Streptomyces halstedii, is a unique 20-membered macrocyclic lactam with a novel aminosugar vicenisamine. The vicenistatin biosynthetic gene cluster (vin) spanning approximately 64 kbp was cloned and sequenced. The cluster contains putative genes for the aglycon biosynthesis including four modular polyketide synthases (PKSs), glutamate mutase, acyl CoA-ligase, and AMP-ligase. Also found in the cluster are genes of NDP-hexose 4,6-dehydratase and aminotransferase for vicenisamine biosynthesis. For the functional confirmation of the cluster, a putative glycosyltransferase gene product, VinC, was heterologously expressed, and the vicenisamine transfer reaction to the aglycon was chemically proved. A unique feature of the vicenistatin PKS is that the loading module contains only an acyl carrier protein domain, in contrast to other known PKS-loading modules containing certain activation domains. Activation of the starter acyl group by separate polypeptides is postulated as well.     

Water cluster growth in hydrophobic solid nanospaces

The growth mechanism of water clusters in carbon nanopores is clearly elucidated by in situ small-angle X-ray scattering (SAXS) studies and grand canonical Monte Carlo (GCMC) simulations at 293-313 K. Water molecules are isolated from each other in hydrophobic nanopores below relative pressures (P/P(0)) of 0.5. Water molecules associate with each other to form clusters of about 0.6 nm in size at P/P(0)=0.6, accompanied by a remarkable aggregation of these clusters. The complete filling of carbon nanopores finishes at about P/P(0)=0.8. The correlation length analysis of SAXS profiles leads to the proposal of a growth mechanism for these water clusters and the presence of the critical cluster size of 0.6 nm leads to extremely stable clusters of water molecules in hydrophobic nanopores. Once a cluster of the critical size is formed in hydrophobic nanopores, the predominant water adsorption begins to fill carbon nanopores.     

KINETICS AND MECHANISM OF PHOTOCYCLOADDITION OF DEOXYURIDINES TO 2,3-DIMETHYL-2-BUTENE

The mechanism of photocycloaddition of 2′-deoxyuridine (1a) and thymidine (1b) to 2,3-dimethyl-2-butene (Bu) in acetonitrile by UV irradiation has been studied. The reciprocal quantum yield for the cycloaddition increased linearly with reciprocal concentrations of Bu in acetonitrile to give limiting quantum yields at infinite concentration of Bu as 0.030 and 0.0096 for 1a and 1b , respectively. This shows that the cycloaddition proceeds in a two-step mechanism between the triplet state of 1 and Bu through biradical intermediates. Addition of cis-1,3-pentadiene quenched the reaction obeying the Stern–Volmer equation. The above quenching experiments and laser transient spectroscopy revealed that the triplet state of 1a reacts with Bu with much larger rate constant (1.3–1.6 × 10⁹ M^?1 s^?1) than that of 1b (4–5 × 10⁷ M^?1 s^?1) reflecting larger steric hindrance exerted in the reaction of 1b than that of 1a .     

Internal radiocesium contamination of adults and children in Fukushima 7 to 20 months after the Fukushima NPP accident as measured by extensive whole-body-counter surveys

The Fukushima Dai-ichi NPP accident contaminated the soil of densely-populated regions in Fukushima Prefecture with radioactive cesium, which poses significant risks of internal and external exposure to the residents. If we apply the knowledge of post-Chernobyl accident studies, internal exposures in excess of a few mSv/y would be expected to be frequent in Fukushima.Extensive whole-body-counter surveys (n = 32,811) carried out at the Hirata Central Hospital between October, 2011 and November, 2012, however show that the internal exposure levels of residents are much lower than estimated. In particular, the first sampling-bias-free assessment of the internal exposure of children in the town of Miharu, Fukushima, shows that the ¹³⁷Cs body burdens of all children (n = 1,383, ages 6–15, covering 95% of children enrolled in town-operated schools) were below the detection limit of 300 Bq/body in the fall of 2012. These results are not conclusive for the prefecture as a whole, but are consistent with results obtained from other municipalities in the prefecture, and with prefectural data.     

Mechanistic action of ferric oxide in the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In the hydrosilylation of 1,6-divinyl(perfluorohexane) (FDV) with trichlorosilane (TCS) in the presence of catalytic chloroplatinic acid (Pt-Cat) under an air atmosphere (0.99 MPa), a runaway reaction accompanied by a severe pressure release occurred when Fe₂O₃ was present as an impurity in the system. In this study, we investigated the mechanism of action of Fe₂O₃ on this hydrosilylation by monitoring the thermal behavior of TCS/FDV/Pt-Cat/Fe₂O₃ mixtures with various compositions, using an accelerating rate calorimeter (ARC). In the case of TSC/FDV/Pt-Cat, a typical hydrosilylation composition in the industrial process, heat release, possibly due to hydrosilylation, began at 90 °C. On the other hand, for TCS/FDV/Pt-Cat/Fe₂O, the heat release due to hydrosilylation was hardly observed, but abrupt heat and pressure releases occurred at higher temperatures (>170 °C). Like TCS/FDV/Pt-Cat/Fe₂O₃, TCS/FDV, which contain neither Pt-Cat nor Fe₂O₃, released heat and pressure at high temperatures (>210 °C), while the heat and pressure release rates were comparatively low. From these results, the runaway reaction may occur when hydrosilylation is prevented, and Fe₂O₃ behaves as a negative catalyst for hydrosilylation. In the FT-IR spectrum of TCS/FDV/Pt-Cat/Fe₂O₃ after heating, an absorption peak at approximately 1,710 cm^?1, which may be attributed to a carbonyl group, was observed. Thus, it is considered that the runaway reaction observed during the hydrosilylation results from the action of Fe₂O₃ as a negative catalyst for hydrosilylation as well as as an oxidation catalyst for the by-product generated from the reaction between TCS and FDV.     

Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Investigation of the biosynthesis of acetyl-CoA and oxaloacetic acid from pyruvic acid and the quantitative evaluation of incorporated 13C-labeled l-alanine in Arthrobacter hyalinus

Studies on the contribution to acetyl-CoA and oxaloacetic acid from the pyruvic acid transformation from l-alanine in Arthrobacter hyalinus were conducted by means of feeding experiments with l-[1-¹³C]alanine and l-[3-¹³C]alanine, followed by an analysis of the labeling patterns of coproporphyrinogen III using ¹³C NMR spectroscopy. The results demonstrated that l-alanine was transformed via pyruvic acid to both acetyl-CoA and oxaloacetic acid. Additionally, the quantitative analysis indicated that pyruvic acid was transformed to acetyl-CoA and oxaloacetic acid in the ratio of 1:0.8.     

Improved Crystallinity of Poly(3-hexylthiophene-2,5-diyl):[6,6]-Phenyl-C61 Butyric Acid Methyl Ester Film by Pulsed Electrospray Deposition

We investigated crystallinity parameters and ordering domains of poly(3-hexylthiophene-2,5-diyl) blended in [6,6]-phenyl-C₆₁-butyric acid methyl ester films, which were fabricated by pulsed electrospray deposition methods. The crystallinity parameter and the ordering domain were estimated from Raman and optical absorption spectra, respectively. As a result, they were improved with decreasing the off time of pulse voltage, corresponding to the slow evaporation speed of solvent. In addition, both the space-charge limited current mobility and the photoconversion efficiency showed same trend. A highest photoconversion efficiency of 1.11 % was achieved without the thermal annealing process after depositing the active layer.     

High‐Quality Three‐Dimensional Nanoporous Graphene

We report three‐dimensional (3D) nanoporous graphene with preserved 2D electronic properties, tunable pore sizes, and high electron mobility for electronic applications. The complex 3D network comprised of interconnected graphene retains a 2D coherent electron system of massless Dirac fermions. The transport properties of the nanoporous graphene show a semiconducting behavior and strong pore‐size dependence, together with unique angular independence. The free‐standing, large‐scale nanoporous graphene with 2D electronic properties and high electron mobility holds great promise for practical applications in 3D electronic devices.