Stratified turbulent Bunsen flames: flame surface analysis and flame surface density modelling

In this paper it is investigated whether the Flame Surface Density (FSD) model, developed for turbulent premixed combustion, is also applicable to stratified flames. Direct Numerical Simulations (DNS) of turbulent stratified Bunsen flames have been carried out, using the Flamelet Generated Manifold (FGM) reduction method for reaction kinetics. Before examining the suitability of the FSD model, flame surfaces are characterized in terms of thickness, curvature and stratification.

All flames are in the Thin Reaction Zones regime, and the maximum equivalence ratio range covers 0.1?φ?1.3. For all flames, local flame thicknesses correspond very well to those observed in stretchless, steady premixed flamelets. Extracted curvature radii and mixing length scales are significantly larger than the flame thickness, implying that the stratified flames all burn in a premixed mode. The remaining challenge is accounting for the large variation in (subfilter) mass burning rate.

In this contribution, the FSD model is proven to be applicable for Large Eddy Simulations (LES) of stratified flames for the equivalence ratio range 0.1?φ?1.3. Subfilter mass burning rate variations are taken into account by a subfilter Probability Density Function (PDF) for the mixture fraction, on which the mass burning rate directly depends. A priori analysis point out that for small stratifications (0.4?φ?1.0), the replacement of the subfilter PDF (obtained from DNS data) by the corresponding Dirac function is appropriate. Integration of the Dirac function with the mass burning rate m=m(φ), can then adequately model the filtered mass burning rate obtained from filtered DNS data. For a larger stratification (0.1?φ?1.3), and filter widths up to ten flame thicknesses, a β-function for the subfilter PDF yields substantially better predictions than a Dirac function. Finally, inclusion of a simple algebraic model for the FSD resulted only in small additional deviations from DNS data, thereby rendering this approach promising for application in LES.     

Unraveling the Composition of Rembrandt's Impasto through the Identification of Unusual Plumbonacrite by Multimodal X‐ray Diffraction Analysis

Rembrandt (1606–1669) is renowned for his impasto technique, involving his use of lead white paint with outstanding rheological properties. This paint was obtained by combining lead white pigment (a mixture of cerussite PbCO₃ and hydrocerussite Pb₃(CO₃)₂(OH)₂) with an organic binding medium, but the exact formulation used by Rembrandt remains a mystery. A powerful combination of high‐angle and high‐lateral resolution x‐ray diffraction was used to investigate several microscopic paint samples from four Rembrandt masterpieces. A rare lead compound, plumbonacrite (Pb₅(CO₃)₃O(OH)₂), was detected in areas of impasto. This can be considered a fingerprint of Rembrandt's recipe and is evidence of the use of an alkaline binding medium, which sheds a new light on Rembrandt's pictorial technique.     

Photocatalytic growth of dendritic silver nanostructures as SERS substrates

We report a one-step photocatalytic synthesis method of dendritic silver nanostructures. These self-organised structures show an excellent Raman enhancement enabling the detection of analytes from dilute solutions by surface-enhanced Raman spectroscopy.     

Capillary and nano-liquid chromatography-tandem mass spectrometry for the quantification of small molecules in microdialysis samples: comparison with microbore dimensions

Enhanced sensitivity is a well known benefit of miniaturised LC-electrospray (ESI)-MS/MS methods. The suitability of miniaturised LC-MS/MS for quantification of small molecules in dialysates was investigated using the anti-epileptic drug oxcarbazepine, its active metabolite, 10,11-dihydro-10-hydroxycarbamazepine, and the internal standard for microdialysis probe calibration, 2-methyl-5H-dibenz(b,f)azepine-5-carboxamide, as test compounds. ESI-MS detection is sensitive to matrix effects. Therefore, dialysate matrix effects were investigated by comparing the responses of standards made in water, Ringer's solution (salt solution used as perfusion fluid) and blank dialysate matrix. Due to the occurrence of ion suppression or enhancement, direct injection of dialysis samples onto the analytical column could not be applied for quantification of small molecules in dialysis samples. Column switching was necessary for desalting and preconcentration of the dialysates. However, this approach was not able to completely eliminate salt effects when the injection volume exceeded 1 microL. No differences in response between Ringer's solution and dialysate matrix were detected at capillary and nano-dimensions. Calibration standards should be prepared with Ringer's solution instead of water for quantitative analysis of microdialysates. A microbore, capillary and nano-LC-ESI-MS/MS method were compared in terms of method feasibility, linearity, sensitivity, accuracy and precision. Downscaling to capillary and nano-dimensions resulted in a gain in detection sensitivity of 5 and 50, respectively. Miniaturised LC-MS/MS was found to be fit for quantification of small molecules in dialysates with acceptable accuracy and method precision.     

Development of Non‐Cell Adhesive Vascular Grafts Using Supramolecular Building Blocks

Cell‐free approaches to in situ tissue engineering require materials that are mechanically stable and are able to control cell‐adhesive behavior upon implantation. Here, the development of mechanically stable grafts with non‐cell adhesive properties via a mix‐and‐match approach using ureido‐pyrimidinone (UPy)‐modified supramolecular polymers is reported. Cell adhesion is prevented in vitro through mixing of end‐functionalized or chain‐extended UPy‐polycaprolactone (UPy‐PCL or CE‐UPy‐PCL, respectively) with end‐functionalized UPy‐poly(ethylene glycol) (UPy‐PEG) at a ratio of 90:10. Further characterization reveals intimate mixing behavior of UPy‐PCL with UPy‐PEG, but poor mechanical properties, whereas CE‐UPy‐PCL scaffolds are mechanically stable. As a proof‐of‐concept for the use of non‐cell adhesive supramolecular materials in vivo, electrospun vascular scaffolds are applied in an aortic interposition rat model, showing reduced cell infiltration in the presence of only 10% of UPy‐PEG. Together, these results provide the first steps toward advanced supramolecular biomaterials for in situ vascular tissue engineering with control over selective cell capturing.

     

Analysis of collaborative savings and cost allocation techniques for the cooperative carrier facility location problem

Transport companies may cooperate to increase their efficiency levels by, for example, the exchange of orders or vehicle capacity. In this paper a new approach to horizontal carrier collaboration is presented: the sharing of distribution centres (DCs) with partnering organisations. This problem can be classified as a cooperative facility location problem and formulated as an innovative mixed integer linear programme. To ensure cooperation sustainability, collaborative costs need to be allocated fairly to the different participants. To analyse the benefits of cooperative facility location and the effects of different cost allocation techniques, numerical experiments based on experimental design are carried out on a UK case study. Sharing DCs may lead to significant cost savings up to 21.6%. In contrast to the case of sharing orders or vehicles, there are diseconomies of scale in terms of the number of partners and more collaborative benefit can be expected when partners are unequal in size. Moreover, results indicate that horizontal collaboration at the level of DCs works well with a limited number of partners and can be based on intuitively appealing cost sharing techniques, which may reduce alliance complexity and enforce the strength of mutual partner relationships.     

A propeller-like uranyl metallomesogen

Uranyl triflate forms with three imidazo[4,5-f]-1,10-phenanthroline ligands a propeller-like complex that exhibits a hexagonal columnar phase. The ligand is not liquid-crystalline, but a mesophase is induced upon complex formation with the uranyl salt. The thermal behavior has been investigated by polarizing optical microscopy and by high-temperature X-ray diffraction. A model of the stacking of the molecules in the mesophase is proposed.