The structures of 5-methyl-5-phenyl-5H-dibenzo[b,f] silepin and its saturated analog

The structures of 5-methyl-5-phenyl-5H-dibenzo[b,f] silepin (I) and 5-methyl- 5-phenyl-1O,11-dihydro-5H-dibenzo [b,f] silepin (II) have been determined from three-dimensional X-ray data collected by counter methods. I crystallizes in the orthorhombic space group Pnam with a 7.596(3), b 18.102(5) and c 12.190(2) Å; observed and calculated densities (Z = 4) are 1.17 and 1.18 g cm^?3, respectively. II crystallizes in the monoclinic space group $\text{P}\text{2}{}_1\text{c}$ with a 11.115(3), b 7.920(3), c 20.765(5) Å and β 111.71(2)°; observed and calculated densities (Z = 4) are 1.17 g cm^?3. Anisotropic refinement of nonhydrogen atoms, with hydrogen atoms included at fixed ideal locations, gave conventional R-factors of 4.5% (I) and 5.0% (II). Compound I exhibits the boat conformation for the tricyclic framework and is located on a crystallographically required mirror plane. Com- pound II has the expected folded boat conformation. The torsion angle about the 10,11-bond is 0.0° for I, a crystallographic symmetry requirement, and 89.9° for II. Mean SiC bond distances are 1.863 Å(I) and 1.875 Å(II). The dihedral angles between the planar benzo groups are 129.7° (I) and 137.2° (II); introduc- tion of unsaturation at the 10,11-position decreases the dihedral angle in the tri- cyclic system, i.e., the tricyclic system is more bent.     

Copolymeric (lR-trans)-N,N'-1,2-cyclohexylene-bisbenzamide oligodimethylsiloxane chiral stationary phase for gas chromatography

A copolymeric stationary phase, consisting of a chiral selective part, i.e. (1R-trans)-N,N'-1,2-cyclohexylenebisbenzamide, and an efficient siloxane oligomeric part, was successfully applied to open tubular column GC analysis. The efficiency and the chiral selectivity of this stationary phase were studied in detail, and high capacity and efficiency at elevated GC temperatures were especially noted. Several drugs and other enantiomeric pairs were separated. The shown examples demonstrate a broad application range for this type of chiral stationary phase in GC analysis.     

Bis(cyclopentadienyl)titanium complexes of naphthalene-1,8-dithiolates, biphenyl 2,2'-dithiolates, and related ligands

Titanocene 1,8-dithiolato-naphthalene and titanocene 2,2'-dithiolato biphenyl are produced by the reaction of naphtho[1,8-cd]-1,2-dithiole [or the biphenyl] with titanocene dicarbonyl (Ti(II)) in toluene at room temperature. The pro-ligands 2,7-di(tert-butyl)naphtho[1,8-cd]-1,2-dithiole, 5,6-dihydroacenaphtho[5,6-cd]-1,2-dithiole, 4,5-dithioacephenanthrylene, and 13,14-dithiapicene have been used in similar reactions with titanocene dicarbonyl to investigate the effect of steric bulk and of varying the naphthalene backbone on the final complex. The resulting Cp(2)TiS(2)Ar complexes (Ar = naphthalene) have been shown by temperature-dependent (1)H NMR spectroscopy to exist in solution in an envelope conformation with the six-membered TiS(2)C(3) rings undergoing inversion on the NMR time scale while the similar Cp(2)TiS(2)Ar complexes (Ar = biphenyl, binaphthalene) interconvert more rapidly. Titanocene 2,2'-disulfinato biphenyl has been synthesized by the salt elimination reaction of titanocene dichloride (Ti(IV)) and the disodium salt of biphenyl 2,2'-disulfinic acid. Finally, the effect of using pro-ligands where the sulfur atoms have been mono- or di-oxidized has been studied, and an interesting oxygen elimination reaction is observed for the S=O fragments but not for the SO(2) groups. All complexes have been characterized spectroscopically and seven X-ray structures are reported.     

Synthesis of novel 4-amino-1,4-benzodiazepine-2,5-diones for anticonvulsant testing

A series of novel 4-amino-1,4-benzodiazepine-2,5-diones was synthesized via two pathways. The first method involved reductive alkylation of unsymmetrical hydrazines with glyoxylic acid, followed by Fisher esterification. The resulting N-aminoglycinate ethyl ester was subsequently o-nitrobenzoylated, reduced, and thermally cyclized to obtain 4-dialkylaminobenzodiazepinones. In the second method methylhydrazine was acetylated at N_α then benzoylated at N_β to give 1,2-diacylhydrazines. Alkylation with ethyl bromoacetate and reduction of the nitro group, followed by thermal cyclization yielded 4-acetamidobenzodiazepinones. All title compounds were evaluated in mice in MES seizure and sc Met seizure threshold tests for anticonvulsant activity, and in the rotorod test for neurotoxicity. Activity and toxicity were both minimal.     

Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Long‐Lived Spin States for Low‐Field Hyperpolarized Gas MRI

Parahydrogen induced polarization was employed to prepare a relatively long‐lived correlated nuclear spin state between methylene and methyl protons in propane gas. Conventionally, such states are converted into a strong NMR signal enhancement by transferring the reaction product to a high magnetic field in an adiabatic longitudinal transport after dissociation engenders net alignment (ALTADENA) experiment. However, the relaxation time T₁ of ～0.6 s of the resulting hyperpolarized propane is too short for potential biomedical applications. The presented alternative approach employs low‐field MRI to preserve the initial correlated state with a much longer decay time T_LLSS=(4.7±0.5) s. While the direct detection at low‐magnetic fields (e.g. 0.0475 T) is challenging, we demonstrate here that spin‐lock induced crossing (SLIC) at this low magnetic field transforms the long‐lived correlated state into an observable nuclear magnetization suitable for MRI with sub‐millimeter and sub‐second spatial and temporal resolution, respectively. Propane is a non‐toxic gas, and therefore, these results potentially enable low‐cost high‐resolution high‐speed MRI of gases for functional imaging of lungs and other applications.     

Batch versus Flow Photochemistry: A Revealing Comparison of Yield and Productivity

The use of flow photochemistry and its apparent superiority over batch has been reported by a number of groups in recent years. To rigorously determine whether flow does indeed have an advantage over batch, a broad range of synthetic photochemical transformations were optimized in both reactor modes and their yields and productivities compared. Surprisingly, yields were essentially identical in all comparative cases. Even more revealing was the observation that the productivity of flow reactors varied very little to that of their batch counterparts when the key reaction parameters were matched. Those with a single layer of fluorinated ethylene propylene (FEP) had an average productivity 20 % lower than that of batch, whereas three‐layer reactors were 20 % more productive. Finally, the utility of flow chemistry was demonstrated in the scale‐up of the ring‐opening reaction of a potentially explosive [1.1.1] propellane with butane‐2,3‐dione.     

Portable capillary liquid chromatography for pharmaceutical and illicit drug analysis

A newly developed portable capillary liquid chromatograph was investigated for the separation of various pharmaceutical and illicit drug compounds. The system consists of two high‐pressure syringe pumps capable of delivering capillary‐scale flow rates at pressures up to 10 000 psi. Capillary liquid chromatography columns packed with sub‐2 μm particles are housed in cartridges that can be inserted into the system and easily connected through high‐pressure fluidic contact points by simply applying a specific, predetermined torque rather than using standard fittings and less precise sealing protocols. Several over‐the‐counter analgesic drug separations are demonstrated, along with a simple online measurement of tablet dissolution. Twenty illicit drug compounds were also separated across six targeted drug panels. The results described in this study demonstrate the capability of this compact liquid chromatography instrument to address several important drug‐related applications while simplifying system operation, and greatly reducing solvent usage and waste generation essential for onsite analysis.