On-line preconcentration of inorganic mercury and methylmercury in sea-water by sorbent-extraction and total mercury determination by cold vapour atomic absorption spectrometry

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C(18) minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 microl. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/- 3.4% at 0.5 microg/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.     

Activity measurements in the ternary system NaBr+NaClO4+H2O at 25°C

The activity coefficients of sodium bromide in the ternary system NaBr+NaClO₄+H₂O were determined at 25°C and constant ionic strength of 0.1, 0.5, 1, 2, and 3 mol-kg^?1 from emf of the cell without, liquid junction $$ISE - Na|NaBr(m_A ), NaClO_4 (m_B ), AgCl_{(s)} 1 Ag$$ The experimental activity coefficients were comparatively analyzed by using the Harned, Scatchard, Pitzer and Lim-HOLL treatments. All these methods are adequate for the analysis of the experimental data. The results have been compared with those of Lanier for the system: NaCl+NaClO₄+H₂O. The Gibbs excess energy of mixing was obtained and qualitatively interpreted in terms of ionic interactions.     

Column-switching high-performance liquid chromatographic analysis of carbamazepine and its principal metabolite in human plasma with direct sample injection using an alkyl-diol silica (ADS) precolumn

In this paper, the on-line coupling of solid-phase extraction, based on a restricted-access support with high-performance reverse phase chromatography for the analysis of carbamazepine (CBZ) and carbamazepine-10,11-epoxide (CBZ-E) in human plasma samples is described. A precolumn packed with 25 mum C(18) alkyl-diol support is used for direct plasma injection. Using column-switching techniques, the analytes were enriched on the precolumn by a 5 mM phosphate buffer (pH 7) with 2% of methanol solution at a flow-rate of 0.8 ml min(-1), while proteins and endogenous hydrophilic substances in plasma were washed off to waste. The enriched analytes were then back-flushed onto the analytical C(18) column, separated by a mixture of 10 mM phosphate buffer (pH 7) acetonitrile (70:30 v/v) solution at a flow-rate of 1.0 ml min(-1) and detected by the ultraviolet absorbance set at 212 and 285 nm and without transfer loss. Linear calibration graphs were obtained for sample injection volumes of 50 (0.2-4.0 of mug of CBZ ml(-1) and 0.1-5.0 mug of CBZ-E ml(-1), respectively), and 20 mul (5.0-20.0 mug of CBZ ml(-1)); in either case the r-value was >0.9963. Recoveries from spiked plasma samples were quantitative for both analytes and the coefficients of variation were below 3.83%. The lowest samples concentrations that can be quantified with acceptable accuracy and precision was 0.2 mug CBZ ml(-1) and 0.1 mug CBZ-E ml(-1) when a sample volume of 50 mul was injected. Concentrations of 0.08 and 0.05 mug ml(-1) of CBZ and CBZ-E were considered the limit of detection for a signal-to-noise ratio of 3. Furthermore, the developed column-switching method was successfully applied to the determination of CBZ and CBZ-E in plasma samples of patients submitted to CBZ therapy.     

Determination of lead in wines by hydride generation atomic absorption spectrometry.

The optimization of lead hydride generation in aqueous ethanolic media and the influence on its generation of the wine components, both white and red, have been studied. These interferences were overcome by careful control of the parameters affecting hydride generation and the procedure was applied to the determination of Pb in wines. The method is fast, accurate and sensitive and can be used to quantify 24 ppb of Pb in wines.     

A semi-automatic combustion method for the simultaneous determination of3H and35S in doubly labelled organic materials by liquid scintillation counting

A sample preparation method developed for the simultaneous liquid scintillation assay of tritium and³⁵S in doubly labelled organic materials is described. The sample is burnt in a stream of oxygen and the radioactive isotope carriers formed are collected separately for individual counting.³⁵S content of the sample is measured as a dilute sulfuric acid solution, while the tritium is counted as water. The procedure is free of cross-contamination and memory effect, provides quantitative analytical recovery, and the final solutions ready for counting are obtained in twelve minutes.     

Group method approach to the estimation of response factors of unavailable substances in quantitative gas chromatography

The method's accuracy of a compound quantitation by chromatography depends on the calibration procedure with a pure standard of the target analyte, if the latter is unavailable uncertainty is unavoidable. The group method is a different approach in GC quantitative analysis that shows a practicable way for avoiding this uncertainty and accurately quantify a mixture containing one or more unavailable components. This paper is concerned with the definition of the group method quantitative parameters, the application procedures for their calculation, the determination of the quantitative proportion of a group of unavailable components of a mixture and the partial or total quantitation of the latter. The paper also describes the steps for carrying out the so-called group-correlation method in the determination of the response factors of unavailable compounds, which belong to a homologous series. The GC experimental corroboration of the group method approach employing model mixtures of compounds is also presented.     

Über Reaktionen von Nitrosophenolen, 3. Mitt.: Reaktion von 2-Nitroso-1-naphthol mit Resorcin und Orcin

Zusammenfassung Die Reaktion von 2-Nitroso-1-naphthol mit Resorcin bzw. Orcin in Äther bei Anwesenheit von HNO₃ liefert Benzo[c]phenoxazon-(9) (I), Benzo[c]phenoxazon-(9)-12-oxid (II), Methyl-benzo[c]phenoxazon-(9) (III) sowie 11-Methyl-benzo[c]phenoxazon-(9)-12-oxid (IV). Die Struktur der isolierten Substanzen wurde durch Reduktion mittels TiCl₃ sowie durch die UV- und IR-Spektren gestützt.

---

The reaction of 2-nitroso-1-naphthol with resorcinol and orcinol in ether solution in the presence of nitric acid has been studied. From the reaction mixture the benzophenoxazones I–IV have been isolated. Structures were assigned on the grounds of UV and IR spectra and partly by using TiCl₃ as a reducing agent.

---

---

Mit 1 Abbildung     

Statistical approach to bistable behaviour of a nonlinear system in a stationary field

Conclusions This discussion concerning the probability density confirms in a new way the results obtained in paper [1] in which a two-peak behaviour of the photocount distribution has been found. This general result depends on the particular nonlinear interaction scheme, and the bistable behaviour is caused by quantum fluctuations produced by the nonlinear interaction.As losses are not taken into account, other kinds of fluctuations that can modify the bistable behaviour are not accounted for in this paper.