Cholesteric liquid crystal displays as optical sensors of barbiturate binding

The influence on the optical properties of cholesteric liquid crystal displays (LCDs) was examined for neutral molecule binding by mesogen/receptors in the mesomorphic phase. The motivation was to prepare neutral molecule sensors that use a colour change to signal analyte binding. A receptor that binds barbiturate analytes was modified with two or one cholesteryl groups to yield compounds 2 and 3, respectively. LCDs were prepared by incorporating one of the receptor/mesogen compounds into a cholesteric LC blend along with a potential H‐bonding guest. The optical properties of the LCDs were then determined by measuring the absorbance of the displays. For various LCDs, the colour of the display depended upon several factors: the amount of guest molecule used, the number of cholesteryl side chains on the receptor and the mole concentration of receptor/mesogen in the blend. In particular, complementary host/guest binding of H‐bonding analytes by the bis(cholesteryl) receptor 2 in a cholesteric LCD caused a change of up to +70 nm, which was observed by the naked eye as a blue‐to‐orange colour change. Control experiments confirm that the colour of an LCD is a consequence of molecular recognition in the mesomorphic phase.     

Synthesis of Sialyl Lewis X Analogues

Abstract

Sialyl Lewis X (SLe^x) analogs 2a and 2b were synthesised, where the N-acetyl-D-glucose and the D-galactose units of SLe^x 1 were replaced with an alkyl and a heteroalkyl spacer. Sulphate ester 6i was also synthesised from alcohol 6b and chlorosulphonic acid. A novel promoter, silver mercaptoethanesulphonate, was used to synthesise α-sialosides 2c. 7b and 7c.     

House-of-security approach to measurement in analytical chemistry: quantification of human error using expert judgments

A new technique for quantification of human errors in chemical analysis using expert judgments is described. This technique is based on the house-of-security approach developed recently in the field of safety and security for prevention of terrorist and criminal attacks against an organization. The following relative quantification parameters (expressed in %) are proposed in the technique: (a) likelihood score of human error in a chemical analytical measurement/testing method, (b) severity score of human error for reliability of the test results, (c) importance score of a component of a laboratory quality system, and (d) effectiveness score of the quality system as a whole in preventing/blocking human error. As an example, 34 scenarios of human error in pH measurement of groundwater are discussed and quantified.     

Synthesis and biological evaluation of 5′-O-dicarboxylic fatty acyl monoester derivatives of anti-HIV nucleoside reverse transcriptase inhibitors

A number of 5′-O-dicarboxylic fatty acyl monoester derivatives of 3′-azido-3′-deoxythymidine (zidovudine, AZT), 2′,3′-didehydro-2′,3′-dideoxythymidine (stavudine, d4T), and 3′-fluoro-3′-deoxythymidine (alovudine, FLT) were synthesized to improve the lipophilicity and potentially the cellular delivery of parent polar 2′,3′-dideoxynucleoside (ddN) analogs. The compounds were evaluated for their anti-HIV activity. Three different fatty acids with varying chain length of suberic acid (octanedioic acid), sebacic acid (decanedioic acid), and dodecanedioic acid were used for the conjugation with the nucleosides. The compounds were evaluated for anti-HIV activity and cytotoxicity. All dicarboxylic ester conjugates of nucleosides exhibited significantly higher anti-HIV activity than that of the corresponding parent nucleoside analogs. Among all the tested conjugates, 5′-O-suberate derivative of AZT (EC₅₀ = 0.10 nM) was found to be the most potent compound and showed 80-fold higher anti-HIV activity than AZT without any significant toxicity (TC₅₀ >500 nM).     

Synthesis,Aromaticity, and Application of peri-Pentacenopentacene: Localized Representation of Benzenoid Aromatic Compounds

We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene ( TIPS-PPP ), a vertical extension of TIPS-pentacene ( TIPS-PEN ) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN , TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1 cm² V^?1 s^?1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800 nm.     

Characterisation of colloidal drug delivery systems from the naked eye to Cryo-FESEM

Poly(ethylcyanoacrylate) nanoparticles prepared by interfacial polymerisation on the basis of microemulsions were prepared in this study and both colloidal systems, nanoparticles and microemulsions, were analysed by visual observation and several microscopic techniques. Phase boundaries for the microemulsions of the two pseudoternary systems ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and water with and without butanol as a cosurfactant were determined by visual observation of the samples. Microemulsions containing liquid crystals were determined by polarisation light microscopy. Using freeze-fracture transmission electron microscopy and Cryo-field emission scanning electron microscopy the type of microemulsion (w/o droplet, bicontinuous, solution) was characterised. Nanoparticles prepared from the different types of microemulsion were additionally observed by conventional scanning electron microscopy. The size of the nanoparticles obtained from electron microscopy was in good agreement with particle sizing techniques (photon correlation spectroscopy) from earlier studies and no morphological differences could be observed in particles prepared from the different types of microemulsions. Cryo-field emission scanning electron microscopy proved to be a most valuable technique in the visualisation of the colloidal systems as samples could be observed close to their natural state.     

High-resolution at 3T for in vivo derivative NMR spectroscopy in medical diagnostics of ovarian tumor: exact quantification by shape estimations

Journal of Mathematical Chemistry - Time signals are measured experimentally throughout sciences, technologies and industries. Of particular interest here is the focus on time signals encoded by...     

Turning Tryptophanase into Odor‐Generating Biosensors

An odor‐based sensor system that exploits the metabolic enzyme tryptophanase (TPase) as the key component is reported. This enzyme is able to convert an odorless substrate like S‐methyl‐L ‐cysteine or L ‐tryptophan into the odorous products methyl mercaptan or indole. To make a biosensor, TPase was biotinylated so that it could be coupled with a molecular recognition element, such as an antibody, to develop an ELISA‐like assay. This method was used for the detection of an antibody present in nM concentrations by the human nose. TPase can also be combined with the enzyme pyridoxal kinase (PKase) for use in a coupled assay to detect adenosine 5′‐triphosphate (ATP). When ATP is present in the low μM concentration range, the coupled enzymatic system generates an odor that is easily detectable by the human nose. Biotinylated TPase can be combined with various biotin‐labeled molecular recognition elements, thereby enabling a broad range of applications for this odor‐based reporting system.     

Characterization of sugarcane bagasse by autofluorescence microscopy

The spatial distribution of chemical compounds in sugarcane bagasse is an important issue in its use as a raw material for second generation ethanol production from cellulose hydrolysis. Lignocellulosic materials including whole bagasse, fiber, pith, and respective samples obtained after chemical bleaching were investigated using confocal fluorescence microscopy and spectroscopy with one and two-photon excitation. Autofluorescence from unbleached samples revealed that emission from fiber walls containing the lignin fraction was longitudinally oriented. After bleaching treatment, the oriented emission was partially disrupted. Autofluorescence from bleached samples with a residual lignin content of about 1 % was ascribed to improved dispersion of remaining fluorophores throughout the samples inducing a concomitant reduction of fluorescence self-quenching in the samples. The combination of autofluorescence images with spectral emission and lifetime measurements provides a tool for microscopic characterization of natural bagasse samples. Moreover, the technique allows monitoring bleaching processes related to lignin removal.