Synthesis and structures of 5-(pyridyl)tetrazole complexes of Mn(II)

New Mn(II) complexes containing 5-(2-pyridyl)tetrazole, 5-(3-cyano-4-pyridyl)tetrazole or 5-(4-pyridyl)tetrazole ligands are described. The complexes are prepared by reaction of the corresponding cyanopyridines with sodium azide in the presence of Mn(II) salts. All the complexes have been characterized by X-ray crystallography, which reveals that 5-(pyridyl)tetrazole ligands can coordinate to Mn through either type of nitrogen atom in the tetrazole residue or via the pyridyl group. In the solid state, extended 2D and 3D structures are produced through networks of hydrogen bonding (involving water molecules and the tetrazolate residue). Acidification of the complexes produces the corresponding free 5-(pyridyl)-1H-tetrazole.     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

A Novel 3‐D Heterobimetallic Cyano‐bridged Coordination Polymer Incorporating Ag···Ag Interaction: [Cu(dien)Ag(CN)2]2[Ag2(CN)3][Ag(CN)2]

A three‐dimensional cyano‐bridged copper(II) complex, [Cu(dien)Ag(CN)₂]₂[Ag₂(CN)₃][Ag(CN)₂] ( 1 ) (dien = diethylenetriamine), has been prepared and characterized by X‐ray crystallography. Complex 1 crystallized in the monoclinic space group P2₁/n with a = 6.988(2), b = 17.615(6), c = 12.564(4) Å, β = 90.790(5)°. The crystal consists of cis‐[Cu(dien)]²⁺ units bridged by [Ag(CN)₂]^— to form a zig‐zag chain. The Ag atoms of the free and bridging [Ag(CN)₂]^— link together to form additional infinite zig‐zag chains with short Ag···Ag distances. The presence of Ag···Ag interactions effectively increases the dimensionality from a 1‐D chain to a 3‐D coordination polymer.     

Mesoporous amorphous MnO<Subscript>2</Subscript> as electrode material for supercapacitor

A kind of novel mesoporous, electrochemical active material, amorphous MnO₂ has been synthesized by an improved reduction reaction and using supramolecular as template. The synthesized sample was characterized physically by thermogravimetric analysis, X-ray diffraction, transmission electron microscope (TEM), and Brunauer–Emmett–Teller (BET) surface area measurement, respectively. Electrochemical characterization was performed using cyclic voltammetry and chronopotentiometry in 2 mol/l KOH aqueous solution electrolyte. The results of BET and TEM analysis indicated that supramolecular template plays an important role in the process of big specific surface area mesoporous material forming. After sintering at 200 °C, the sample still remained an amorphous structure, and its specific capacitance reached 298.7 F/g and presented a very stable capacitance after 500 cycles. In addition, the electrochemical process, such as ion transfer and electrical condition, was also investigated with electrochemical impedance spectroscopy.     

Hydrogenation of nitrobenzenes catalyzed by platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposite

Platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposites (Pt@G_n-NACl) were prepared and used as catalysts for hydrogenation of nitrobenzenes to anilines with molecular hydrogen under mild conditions. The as-prepared nanoparticles have mean particle size from 2.0 to 5.5 nm, depending on the molar ratio of the metal and the dendrimer. The Pt nanoparticles demonstrate near-monodisperse when the molar ratio of Pt and G₃-NACl is below 30. The interaction among three carboxyl groups terminated at the dendron and the metallic core keeps the Pt nanoparticles from agglomerating. The colloidal solution of Pt nanoparticles stabilized by the dendrimer, in which the molar ratio of Pt/G₃-NACl was less than 60, is stable without precipitation for several weeks. The dendrons attach to the metal core radially, and a substantial fraction of the surface of the metal nanoparticle is unpassivated and available for catalytic reactions. Turnover frequencies for the hydrogenation of nitrobenzenes to anilines change from 353 to 49 h⁻¹ depending on the dendrimer generation and substrates. The dendrimer catalysts are stable during the catalytic hydrogenation process and can be recovered by centrifugation and reused. The results suggest the effectiveness of polyaryl ether trisacetic acid ammonium chloride dendrimer as a stabilizer for the preparation of Pt nanoparticle catalysts.     

Self-assembly and characterization of paclitaxel-loaded N-octyl-O-sulfate chitosan micellar system

N-octyl-O-sulfate chitosan micellar system loaded paclitaxel was prepared by using dialysis method. The critical micelle concentration (CMC) of the modified chitosan was found to be 0.45 mg/ml. Compared with the amount of N-octyl-O-sulfate chitosan, the paclitaxel loading amount in the system was up to 25% (w/w), depending on both of the solvents used in dialysis and the feed weight ratio of paclitaxel to the derivative. The polymeric micelles forming and loading occurred simultaneously in the dialysis process when ethanol and water were utilized as the solvents for paclitaxel and the polymer, respectively. Paclitaxel-loaded micellar system of N-octyl-O-sulfate chitosan was characterized by DSC, WXRD and TEM. TEM photograph revealed that paclitaxel existed as the colloid particulates in ethanol before loading and in the cores of the spherical polymeric micelles after loading. The results of DSC and WXRD indicated that paclitaxel was transferred from the crystalline state to amorphous state after loading. The lyophilized powder of micellar system (25% (w/w) loading) could be reconstituted easily in aqueous media even after 2 months storage at 4 degrees C without the change of paclitaxel entrapment and micelle size. The reconstituted solution (2.1 mg paclitaxel/ml) also showed good stability. The dilution with saline may decrease the loading and physical stability based on the dilution times which was related with CMC of the polymer. In vitro tests showed that paclitaxel was slowly released from micellar solution and the release lasted up to 220 h by means of the dialysis method.     

A Novel Dinuclear Nickel(II) Complex with Three Bridges of Cl–, OAc– and (‐OCH2CH2O‐) Group of N,N, N′, N′‐Tetrakis(2‐benzimidazolyl methyl‐1, 4‐di‐ethylene amino) Glycol Ether

The novel dinuclear Ni²⁺ complex [Ni₂(μ‐Cl)(μ‐OAc) (EGTB)]·Cl·ClO₄·2CH₃OH, where EGTB is N, N, N′, N′‐tetrakis (2‐benzimidazolyl methyl‐1, 4‐di‐ethylene amino)glycol ether, crystallizes in the orthorhombic space group Pnma with a = 15.272(2), b = 14.768(2), c = 22.486(3) Å, V = 5071.4(12) ų, Z = 4, D_calc = 1.414 g cm^?3, and is bridged by triply bridging agents of a chloride ion, an acetate and an intra‐ligand (‐OCH₂CH₂O‐) group. The nickel coordination geometry is that of a slightly distorted octahedron with a NiN₃O₂Cl arrangement of the ligand donor atoms. The Ni–Cl distance is 2.361(2) Å, and two Ni–O distances are 1.996(5) and 2.279(6) Å. The three Ni–N distances are 2.033(7), 2.060(6), and 2.166(6) Å with the Ni–N bond trans to an ether oxygen the shortest, the Ni–N bond trans to an acetate oxygen the middle and the Ni–N bond trans to Cl the longest.     

Structures and stability of N7+ and N7− clusters

Ab initio molecular orbital theory and density functional theory have been used to study nine isomers of N₇ ionic clusters with low spin at the HF/6-31G*, MP2/6-31G*, B3LYP/6-31G*, and B3LYP/6-311(+)G* levels of theory. All stationary points are examined with harmonic vibrational frequency analyses. Four N₇ ⁺ isomers and five N₇ ⁻ isomers are determined to be local minima or very close to the minima on their potential-energy hypersurfaces, respectively. For N₇ ⁺ and N₇ ⁻, the energetically low lying isomers are open-chain structures (C _{2 v} and C _{2 v} or C₂). The results are very similar to those of other known odd-number nitrogen ions, such as N₅ ⁺, N₉ ⁺, and N₉ ⁻, for which the open-chain structures are also the global minima. This research suggests that the N₇ ionic clusters are likely to be stable and to be potential high-energy-density materials if they could be synthesized. Received: 16 July 2001 / Accepted: 8 October 2001 / Published online: 21 January 2002     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Efficient synthesis of cellulose furoates in 1-<Emphasis Type="Italic">N</Emphasis>-butyl-3-methylimidazolium chloride

The ionic liquid 1-N-butyl-3-methylimidazolium chloride ([C₄mim]⁺Cl⁻) was investigated as reaction media for the homogeneous acylation of cellulose with 2-furoyl chloride in the presence of pyridine. The preparation of cellulose furoate depending on the reaction conditions, the cellulose type and the pyridine content was studied. Cellulose furoates with a degree of substitution in the range from 0.46 to 3.0 were accessible, i.e., under mild conditions, with a low excess of reagent and in a short reaction time. The products were characterized by elemental analysis, perpropionylation, ¹H- and ¹³C NMR spectroscopy and FTIR spectroscopy. Thomas Heinze is the member of the European Polysaccharide Network of Excellence (EPNOE), www.epnoe.eu