Hollow-fiber delivery of high-power pulsed Nd:YAG laser light

We propose hollow fibers for delivery of high-peak-power pulsed Nd:YAG laser light. Hollow fibers with an internal polymer layer were fabricated by a liquid-phase coating technique. We reduced the losses of the fibers in the near-infrared region by producing a silver film that was very smooth owing to use of an ultrasonic wave for mixing of the silver and the reducer solutions in the silver-plating process. The straight losses of the 1-m-long polymer-coated fibers were 0.3 dB for the 700-mum bore size and 0.1 dB for the 1000-mum bore fiber.     

Artificial Intelligence Computation to Establish Relationships Between APS Process Parameters and Alumina–Titania Coating Properties

Modeling the behavior of air plasma spray (APS) process, one of the challenges nowadays is to identify the parameter interdependencies, correlations and individual effects on coating properties, characteristics and influences on the in-service properties. APS modeling requires a global approach which considers the relationships between coating characteristics/ in-service properties and process parameters. Such an approach permits to reduce the development costs. This is why a robust methodology is needed to study these interrelated effects. Artificial intelligence based on fuzzy logic and artificial neural network concepts offers the possibility to develop a global approach to predict the coating characteristics so as to reach the required operating parameters. The model considered coating properties (porosity) and established the relationships with power process parameters (arc current intensity, total plasma gas flow rate, hydrogen content) on the basis of artificial intelligence rules. Consequently, the role and the effects of each power process parameter were discriminated. The specific case of the deposition of alumina–titania (Al₂O₃–TiO₂, 13% by weight) by APS was considered.     

Double-pass casting: A novel technique for developing high performance ultrafiltration membranes

Double-pass casting was evaluated as a technique to overcome hard-to-cast membranes or hard-to-mix solutions. Two types of polyethersulfone (PES) membranes were tested, one incorporating a hydrophilic surface modifying additive and the other with a hydrophobic one. It was found that the morphological improvement was more obvious for hydrophobic membranes since their solutions were not completely homogenous and hard-to-cast. The double-pass hydrophobic membranes had smoother surfaces and more porous support layers, resulting in higher fluxes, higher volume of treated water (67.4% increase) but decreased natural organic matters (NOM) rejection. The new casting approach produced hydrophilic membranes having a spongy structure (as opposed to finger-like cavities), yet they had similar NOM rejection, a 12.4% higher flux than the single-pass membranes prepared from the same dope. This is attributed to the quite homogenous hydrophilic casting solutions and to the performance of the original hydrophilic membranes (single-pass casting) that was relatively good.     

Multidynamic Crystalline Molecular Rotors Comprising an N-Heterocyclic Carbene Binuclear Au(I) Complex Bearing Multiple Rotators

We report multidynamic molecular rotations in crystals using a concave-shape N-heterocyclic carbene (NHC) binuclear Au(I) complex rotor bearing pyrazine and tetrahydrofuran (THF) molecules as multicomponent rotators. Single-crystal X-ray diffraction (XRD) measurements revealed that two THF molecules are located near the central pyrazine encapsulated by two bulky NHC ligands. From ²H solid-state NMR analysis, it was observed that the pyrazine rotated in a 2-fold site exchange with a 180° rotational angle and a 31 kJ mol⁻¹ energy barrier, while the THF molecules showed a 23°-38° libration with a lower energy barrier (14 kJ mol⁻¹). Interestingly, the pyrazine rotation was accelerated when the THF molecules rotated in fast site exchange with a large angle of libration, suggesting that the rotators exhibit multidynamics in a correlated manner.     

Effects of Inorganic Nano-Additives on Properties and Performance of Polymeric Membranes in Water Treatment

Separation using selective polymeric membranes has been well-established as an energy-efficient and cost-effective technology in water treatment and many other applications involving aqueous solutions. However, limited chemical, thermal, and mechanical resistances besides their tendency to fouling and inadequate pure water flux may often restrict their applications. To this end, inorganic materials as additives have been demonstrated to be able to enhance chemical, thermal, and fouling membrane resistances, which demonstrate their great potential for developing novel membranes by using them as additives in polymer matrices. Considering the excellent characteristics of the nanosized particles, this study reviews the effects of inorganic nano-additives on properties and performance of polymer/nanoparticle composite membranes. It has been demonstrated that using nanomaterials in a polymer matrix could enhance the mechanical strength and stiffness, wettability, selectivity, water permeability, and antifouling characteristics of the host polymer.     

Plasma-induced graft copolymerization of poly(methacrylic acid) on electrospun poly(vinylidene fluoride) nanofiber membrane

Electrospun nanofibrous membranes (ENM) which have a porous structure have a huge potential for various liquid filtration applications. In this paper, we explore the viability of using plasma-induced graft copolymerization to reduce the pore sizes of ENMs. Poly(vinylidene) fluoride (PVDF) was electrospun to produce a nonwoven membrane, comprised of nanofibers with diameters in the range of 200-600 nm. The surface of the ENM was exposed to argon plasma and subsequently graft-copolymerized with methacrylic acid. The effect of plasma exposure time on grafting was studied for both the ENM and a commercial hydrophobic PVDF (HVHP) membrane. The grafting density was quantitatively measured with toluidine blue-O. The degree of grafting increased steeply with an increase in plasma exposure time for the ENM, attaining a maximum of 180 nmol/mg after 120 s of plasma treatment. However, the increase in the grafting density on the surface of the HVHP membrane was not as drastic, reaching a plateau of 65 nmol/mg after 60 s. The liquid entry permeation of water dropped extensively for both membranes, indicating a change in surface properties. Field emission scanning electron microscopy micrographs revealed an alteration in the surface pore structure for both membranes after grafting. Bubble point measurements of the ENM reduced from 3.6 to 0.9 um after grafting. The pore-size distribution obtained using the capillary flow porometer for the grafted ENM revealed that it had a similar profile to that of a commercial hydrophilic commercial PVDF (HVLP) membrane. More significantly, water filtration studies revealed that the grafted ENM had a better flux throughput than the HVLP membrane. This suggests that ENMs can be successfully engineered through surface modification to achieve smaller pores while retaining their high flux performance.     

Anti-babesial compounds from Curcuma xanthorrhiza

Anti-babesial ingredients, (12R)- and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols, were isolated from Curcuma xanthorrhiza. The structures were established by the extensive NMR techniques. The assignments of (1)H NMR data of (12R)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was revised, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was isolated as a pure form for the first time. The IC(50) of the active compounds were compared with that of commercial drug, diminazene aceturate (Ganaseg). IC(50) values of Ganaseg, (12R)-, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols were 0.6 microg mL(-1), 8.3 microg mL(-1) and 11.6 microg mL(-1), respectively.     

New and simple method for fabricating polymer-coated silver hollow fibers with large mechanical strength

A new method is proposed for fabricating polymer-coated silver hollow glass fibers to avoid the flexibility deterioration after the curing process. Transmission properties of fibers made by the two procedures with and without curing process are compared. Little difference was observed in the transmission properties at the wavelength 2.94 μm of Er:YAG laser light and 10.6 μm of CO₂ laser light. The polymer layer is shown to be stable after 2-h, 5-W, continuous wave CO₂ laser light transmission.     

High-precision sample stage for photoemission microscopy of organic films

A high-precision sample stage for photoemission microscopy has been constructed to translate the sample by ±3 mm with accuracy better than 100 nm. The stage is actuated by step motors settled outside the vacuum. The accuracies of the translations were measured by observing a standard patterned sample with a photoemission electron microscope (PEEM) of 50 nm resolution. The accuracy was nearly independent of the distance of each translation step and the error was not accumulated by repeated steps. After round-trip translations up to 0.2 mm, the sample came back to the original position with accuracy of ±50 nm. The performance of the stage was demonstrated by observing growth processes of lead phthalocyanine (PbPc) films formed on graphite.