工件的释放时间和加工时间具有一致性的单机在线排序问题研究

工件的释放时间和加工时间具有一致性, 是指释放时间大的工件其加工时间不小于释放时间小的工件的加工时间, 即若$r_{i}\geq r_{j}$, 则$p_{i}\geq p_{j}$。本文在该一致性约束下, 研究最小化最大加权完工时间单机在线排序问题, 和最小化总加权完工时间单机在线排序问题, 并分别设计出$\frac{\sqrt{5}+1}{2}$-竞争的最好可能在线算法。     

Routes to control of H2 Coulomb explosion in few-cycle laser pulses

We have measured coincident ion pairs produced in the Coulomb explosion of H2 by 8-30 fs laser pulses at different laser intensities. We show how the Coulomb explosion of H2 can be experimentally controlled by tuning the appropriate pulse duration and laser intensity. For laser pulses less than 15 fs, we found that the rescattering-induced Coulomb explosion is dominated by first-return recollisions, while for longer pulses and at the proper laser intensity, the third return can be made to be the major one. Additionally, by choosing suitable pulse duration and laser intensity, we show H2 Coulomb explosion proceeding through three distinct processes that are simultaneously observable, each exhibiting different characteristics and revealing distinctive time information about the H2 evolution in the laser pulse.     

Experimental synchronization of independent entangled photon sources

We report the generation of independent entangled photon pairs from two synchronized but mutually incoherent laser sources. The quality of synchronization is confirmed by observing a violation of Bell's inequality with 3.2 standard deviations in an entanglement swapping experiment. The techniques developed in our experiment are not only important for realistic linear optical quantum-information processing, but also enable new tests of local realism.     

(Fe0.03Ni0.97)8(Si0.79P0.21)3的等温状态方程研究

 采用固态高温烧结反应方法,成功合成出了陨硅镍铁石样品(Fe_0.03Ni_0.97)₈(Si_0.79P_0.21)₃。X射线衍射结果表明,合成样品的结构为R3'c,对应的晶胞参数为a=b=0.663 8(1) nm,c=3.789 2(2) nm,V=1.446 15(6) nm³。在室温下,对样品进行原位高压X射线衍射研究,实验最高压力达到21.3 GPa,随着压力的升高,晶胞体积逐渐减小,但并没有观察到结构相变。利用Birch-Murnaghan状态方程对体积与压力的关系进行拟合,获得常温常压下的体积V₀=1.441 4(24) nm³,体积模量K₀=220(7) GPa。晶轴与压力的关系利用Murnaghan状态方程拟合,获得a轴和c轴的模量分别为K_a=257(9)和K_c=165(4),c轴较a轴容易压缩。     

不均匀性:非晶合金的灵魂

非晶合金,即金属玻璃,是一类特殊的由基本化学元素组成的非晶态物质,由于其独特的微观组织结构,展现出了不同于传统晶态合金材料的特殊物性,而成为高性能材料应用领域的重要一员.由于非晶合金的结构无序性,且当前精确表征其微观结构的实验手段缺乏,相应的理论模型也不完善,人们对非晶合金中一些基础物理问题的认识尚且不足,无法形成基本的理论框架来精确地描述其物性产生的微观机理.因而,当前非晶合金研究的核心问题可以概括为:如何建立以微观特征或结构为基础的基本理论框架,准确地概括非晶合金物性的微观机理.在过去几十年里,针对非晶合金的大量研究表明,在非晶合金长程无序的特征中,隐藏着本征的不均匀性和有序,且这些不均匀性的特征与材料物性有着密切的关联,使得建立以不均匀性特征为基础的理论框架成为可能.本文从非晶合金微观特征的不均匀性包括静态不均匀性和动态不均匀性的视角出发,概括性地总结了非晶合金材料与物理研究中取得的丰硕成果,及当前需要关注的重要科学问题,并针对未来可能的研究模式进行了展望.     

Le Système d'Euler de Kato en Famillie(Ⅱ)

This article is the second article on the generalization of Kato's Euler system. The main subject of this article is to construct a family of Kato's Euler systems over the cuspidal eigencurve, which interpolate the Kato's Euler systems associated to the modular forms parametrized by the cuspidal eigencurve. We also explain how to use this family of Kato's Euler system to construct a family of distributions on Z_p over the cuspidal eigencurve; this distribution gives us a two-variable p-adic L function which interpolate the p-adic L function of modular forms.     

MgO-decorated carbon nanotubes for CO2 adsorption: first principles calculations

The global greenhouse effect makes it urgent to deal with the increasing greenhouse gases.In this paper the performance of MgO-decorated carbon nanotubes for CO 2 adsorption is investigated through first principles calculations.The results show that the MgO-decorated carbon nanotubes can adsorb CO 2 well and are relatively insensitive to O 2 and N 2 at the same time.The binding energy arrives at 1.18 eV for the single-MgO-decorated carbon nanotube adsorbing one CO 2 molecule,while the corresponding values for O 2 and N 2 are 0.55 eV and 0.06 eV,respectively.In addition,multi-molecule adsorption is also proved to be very satisfactory.These results indicate that MgO-decorated carbon nanotubes have great potential applications in industrial and environmental processes.     

Crystal and magnetic structures of Y2CrS4

Chromium(II) sulfide, Y₂CrS₄, prepared by a solid-state reaction of Y₂S₃ and CrS, showed an antiferromagnetic transition at 65 K. The neutron diffraction patterns at 10 and 90 K were both well refined with the space group Pca2₁. At 90 K, cell parameters were a=12.5518(13) Å, b=7.5245(8) Å, and c=12.4918(13) Å. At 10 K, magnetic peaks were observed, which could be indexed on the same unit cell. Magnetic moments of chromium ions were parallel to the b-axis and antiferromagnetically ordered in each set of the 4a sites.     

密闭高温高压溶样ICP-MS测定24个国际地质标样中的Sb和Bi

研究了ICP-MS分析中Bi,Sb,Te和As产生的记忆效应,其记忆效应Bi>Sb>Te>As。在低浓度硝酸介质中(0.01%～1%),贮存样品的聚丙烯瓶和ICP-MS的进样管道会对Bi元素产生严重的吸附作用。0.1%氢氟酸的清洗效果优于6%的硝酸,而6%的硝酸的清洗效果要优于0.1%高氯酸。在给定的仪器操作条件下,Sb和Bi的检出限分别为0.001和0.000 1 ng·mL-1。采用该清洗方法,结合密闭高温高压溶样,测定了24个国际地质标样中的Bi和Sb。大部分标样的测定结果与已有参考值吻合较好。文章还给出了国际标样AGV-2(安山岩)、BHVO-2(玄武岩)和BCR-2(玄武岩)中Bi和Sb的测定值。     

In vitro and in vivo comparative study of the phototherapy anticancer activity of hyaluronic acid-modified single-walled carbon nanotubes,graphene oxide,and fullerene

In this work, carbon nanomaterials, single-walled carbon nanotubes (SWNT), graphene oxide (GO), and fullerene (C60) were modified by hyaluronic acid (HA) to obtain water-soluble and biocompatible nanomaterials with high tumor-targeting capacity and then the comparative study of these hyaluronic acid-modified carbon nanomaterials was made in vitro and in vivo. The conjugates of hyaluronic acid and carbon nanomaterials, namely, HA-SWNT, HA-GO, HA-C60, were confirmed by UV/Vis spectrum, Fourier transform infrared spectroscopy (FTIR), and a transmission electron microscope (TEM). After HA modification, the sizes of HA-SWNT, HA-GO, and HA-C60 were in a range of 70 to 300 nm, and all the three HA-modified materials were at negative potential, demonstrating that HA modification was in favor of extravasation of carbon materials into a tumor site due to enhanced permeability and retention effect of tumor. Photothermal conversion in vitro test demonstrated excellent photothermal sensitivity of HA-SWNT and HA-GO. But the reactive oxygen yield of HA-C60 was the highest compared with the others under visible light irradiation, which proved the good photodynamic therapy effect of HA-C60. In addition, cytotoxicity experiments exhibited that the inhibitory efficacy of HA-SWNT was the lowest, the second was HA-C60, and the highest was HA-GO, which was consistent with the uptake degree of them. While under the laser irradiation, the cell inhibition of the HA-SWNT was the highest, the second was HA-GO, and the last was HA-C60. In vivo evaluation of the three targeting carbon nanomaterials was consistent with the cytotoxicity assay results. Taken together, the results demonstrated that HA-SWNT and HA-GO were suited for photothermal therapy (PTT) agents for their good photothermal property, while HA-C60 was used as a kind of photodynamic therapy (PDT) agent for its photodynamic effect.