基于Labwindows/CVI的无人机畸变测试系统设计

针对现代无人机电网电压畸变参数检测的需求,设计了一种基于Labwindows/CVI的无人机专用畸变测试系统;根据实际装备的需求,设计过程中注重便携的特点和模块化设计思想,完成了系统的硬件和软件设计;为了提高设计的准确性,该系统还采用硬件滤波和数字滤波两种滤波方式进行滤波;实际应用表明,该系统能够准确测出无人机电网的畸变参数与畸变频谱,且各项测试指标均达到了设计要求,能够满足无人机电网交直流畸变测试的需要。     

基于遗传LM算法的涂层目标光谱偏振BRDF建模分析

通过比较测量方法测量得到绿漆涂层木板探测目标在400～720 nm的光谱偏振二向反射分布函数值,从获得的户外试验测量数据入手,分析与探测角、波长之间的关系,通过有限探测条件得到的光谱偏振二向反射分布函数值(BRDF)建立光谱偏振BRDF模型,来描述探测目标的偏振二向反射特性。其中利用基于小面元的模型建立光谱偏振BRDF模型,利用遗传算法和Levenberg-Marquardt(LM)算法相结合的优化算法来获得非线性模型参数。仿真实验结果表明采用的遗传LM优化算法具有较好的性能,能较快较准确得到非线性的模型参数。真实实验数据证明了基于小面元模型的正确性,表明光谱偏振二向反射分布函数建模方法结果的可靠性。最后与绿漆涂层铁板目标的模型反演参数进行比较得出：2种不同材质、相同颜色涂层的目标,具有较为接近的折射率,其较小差别可以理解为由涂层的厚度、均匀程度的不同导致,而非不同的材质所引起。     

Influence of annealing treatment on as-grown Ib-type diamond crystal at a high temperature and high pressure

In this paper,we report on the influence of annealing treatment on as-grown Ib-type diamond crystal under high pressure and high temperature in a china-type cubic anvil high-pressure apparatus.Experiments are carried out at a pressure of 7.0 GPa and temperatures ranging from 1700 C to 1900 C for 1 h.Annealing treatment of the diamond crystal shows that the aggregation rate constant of nitrogen atoms in the as-grown Ib-type diamond crystal strongly depends on diamond morphology and annealing temperature.The aggregation rate constant of nitrogen remarkably increases with the increase of annealing temperature and its value in octahedral diamond is much higher than that in cubic diamond annealed at the same temperature.The colour of octahedral diamond crystal is obviously reduced from yellow to nearly colorless after annealing treatment for 1 h at 1900 C,which is induced by nitrogen aggregation in a diamond lattice.The extent of nitrogen aggregation in an annealed diamond could approach approximately 98% indicated from the infrared absorption spectra.The micro-Raman spectrum reveals that the annealing treatment can improve the crystalline quality of Ib-type diamond characterized by a half width at full maximum at first order Raman peak,and therefore the annealed diamond crystals exhibit nearly the same properties as the natural IaA-type diamond stones of high quality in the Raman measurements.     

吸附制冷中化学吸附的滞后圈研究

文中通过对活性炭-氨以及氯化钙-氨的对比试验,对氯化钙-氨化学吸附的滞后圈进行了研究,结果表明, 化学吸附的滞后现象非常严重,已经超出了气-固吸附的Zigmondy、McBain以及Cohan模型所能解释的范围。对化学吸附的Claperon图进行研究,发现吸附床冷却及加热过程中存在着一段等压冷却以及加热过程,这两个过程与吸附滞后圈相对应。对此现象进行分析,结果表明化学吸附的滞后圈形成原因主要与络合物的稳定常数以及吸附特性相关。     

Perturbation to Mei Symmetry and Adiabatic Invariants for Nonholonomic Systems in Terms of Quasi-Coordinates

Based on the concept of adiabatic invariant, the perturbation to Meisymmetry and adiabatic invariants for nonholonomic mechanical systems interms of quasi-coordinates are studied. The definition of the perturbationto Mei symmetry for the system is presented, and the criterion of theperturbation to Mei symmetry is given. Meanwhile, the Mei adiabaticinvariants for the perturbed system are obtained.     

Read and write processes, and head technology for perpendicular recording

In this paper, we present a review of the write and read processes in perpendicular magnetic recording. We also discuss their impact, based on recording physics aspects, on design considerations for writers and readers. For the write process, we discuss fundamental write-ability limitations as well as possible paths to ultra-high areal density perpendicular recording. The impacts of different medium designs, geometrical scaling, and the breakdown of scaling, both in terms of write-ability and transition curvature, are shown based on different modeling techniques, including analytical formulas, finite element modeling (FEM), and micromagnetic simulations. Basic design rules as well as alternative designs that enable high areal density are briefly explained. For the read-back process, the relation between reader signal to noise ratio (SNR) and resistance, as well as reader resistance shunt and spacing loss, are discussed. Finally, we use a simple example to illustrate, both from a write as well as a read-back perspective, the complicated nature of perpendicular recording systems, and how different medium designs impact recording head technology for ultra high density perpendicular recording.     

Synthesis and characterization of multifunctional silica core-shell nanocomposites with magnetic and fluorescent functionalities

Multifunctional core-shell nanocomposites with a magnetic core and a silica shell doped with lanthanide chelate have been prepared by a simple method. First, citric acid-modified magnetite nanoparticles were synthesized by a chemical coprecipitation method. Then the magnetite nanoparticles were coated with silica shells doped with terbium (Tb³⁺) complex by a modified Stöber method based on hydrolyzing and condensation of tetraethyl orthosilicate (TEOS) and a silane precursor. These multifunctional nanocomposites are potentially useful in a variety of biological areas such as bio-imaging, bio-labeling and bioassays because they can be simultaneously manipulated with an external magnetic field and exhibit unique phosphorescence properties.     

Analysis of magnetic disaccommodation in La-Co-substituted strontium ferrites

M-type strontium ferrites substituted by La³⁺-Co²⁺(Sr_1−xLa_xFe_12−xCo_xO₁₉) were prepared by ceramic process. Effects of the substituted amount of La³⁺ and Co²⁺ on structure and magnetic properties of Sr_1−xLa_xFe_12−xCo_xO₁₉ compounds have systematically been investigated by X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and magnetic disaccommodation. In the measurement range from 80 to 500 K, the magnetic disaccommodation is represented by means of isochronal curves. It is well known that magnetic disaccommodation cannot be obviously found in the M-type of pure strontium ferrites. However, three peaks were observed in Sr_1−xLa_xFe_12−xCo_xO₁₉, and this behavior is explained in terms of the presence of Fe²⁺ cation and to the site occupation by the magnetic Co²⁺ ionic within the hexagonal structure.     

Accuracy analysis and stabilization design of the Fabry–Perot frequency discriminator in double-edge wind lidars

The measurement error of a double-edge wind lidar caused by a disturbed Fabry–Perot interferometer (FPI) is analyzed. Several error sources such as air pressure variations, temperature changes, and mechanical vibrations are considered in the measurement-error model. The simulation results show that a double-edge wind lidar is so sensitive to environmental variations that the measurement error reaches ±60 m/s if the FPI is not stabilized. In order to compensate the external disturbance acting on the FPI, a nonlinear proportional–integral–derivative (PID) control scheme is designed based on the transmission measurement of the calibration channel. An arc tangent function is used to improve the feedback gain of the usual PID control design. The results show that with the new controller the measurement accuracy of the wind lidar can be improved 4–5 times in comparison with the usual control design, and the range of the measurement error is only ±3 m/s.